No matter how old you are you should periodically evaluate your residence to determine whether it suits you not just for the present but the future. Your home assessments will be rethought every time your living situation changes. Whether childproofing for a newborn, making a home more accessible following a sickness or unfortunate accident to someone in the family, or making a toilet area safer for an aging residing parent, there will be an immediate evolution to your primary domicile. These same life span design features are even more important if you believe you're past the age of wanting to move and are relishing the thought of aging in your own home, no matter what physical limitations you might later develop.  Incorporating smart aging design concepts into accessibility home modifications for a home's elder design  will attract a larger group of buyers when you decide to finally sell your home.  Accessible home modifications have become a major component within the housing industry when considering our senior homeowners.

    Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on. Physically challenged has become the more socially accepted description of a person with an impairment.  If your home needs modifications for a disabled child, remember that each type of disability is different and each requires special modifications to the house.  This statement also holds true for aging adults.

    Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our society experience a need for elder construction having significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination.  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

   When mobility becomes an issue for any homeowner or family member, regardless of age, the question arises concerning physically moving to a different home on one level with at least a bath that is more accessible. Austin handicap remodeling can help in preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move. Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country.  Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of accessibility to those very people inhabiting them.  The situation will only become ever more expanding in time.   When these homes were previously purchased,  they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions.  They housed our families, our memories, and our stuff.  They represented a place where we could be ourselves.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA. Remember that a more open space gives room for maneuverability while using any mobility aid required.

   There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist who is also a reputable residential remodeling professional.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

    If you believe you are located at the perfect address, and you have a new member in your family or are simply a multi-generational family of today taking care of a parent and you find yourself short on living space then give us a call. Inevitably at one time or another all homeowners envision potential improvements to an existing home that can significantly enhance their living experience. Regardless of the reason you require home remodeling or an addition we can help you to transform the functionality of your existing living situation or add additional living space to suit your present family's needs. Fall in love with your home again while the professional remodeling contractor's experience helps guide you through changes to your existing home which better fit your daily lifestyle.

Austin Home Remodeling Contractors/Home Additions

The Finished Product From Above Picture

Bathroom Kitchen Remodels

    It's time to find yourself either a qualified architectural firm and proceed with the endless task of interviewing residential remodeling contractor or a local design/build construction company with in house design capabilities that can build what is designed.  The latter situation is usually your best shot at getting what you basically need to solve your living situation problems allowing you to cut out the beyond budget frills.  You will also save on the soft costs of your construction project that have nothing to do with the structural building process itself.  Many local residential contractors are quite capable of pushing out a wall in your home or putting a top on a new structure.  This capability is based on both their experience and knowledge of all the building trades, especially the framing aspect that will certainly be involved.  Actual experience in this particular facet of the project could prove to be very helpful for visualizing the construction and it's possibilities.  Has this contractor ever done this kind of project before?  Does he himself have skilled experience or does he appear to be a drive by limited contractor at the mercy of his subcontractor's capabilities?  Any depth of design is totally based on experience.  You will need to completely check out the contractor's references.  Don't be taken in by paid contractor listings  and referral sights that promise you successful and competent businesses with free background checks.  They were listed there for one and only one reason, somebody paid for the listing fee.  Membership to national associations like NARI reflect only a self paid fee but says nothing about the contractor's experience and creativity.  That only comes from past customer's testimonials that you can fact check through the local BBB, Yelp, or Houzz.

    T-Square Company originally came into being as a remodeling company driven with the purpose to maximize the potential of existing homes.  When updating elements of functionality, style, efficiency, accessibility, and comfort, a home can be brought into your present day needs and desires of it's occupants. We approach complete home remodeling, renovations, and additions with the same targeted mindset using universal design techniques to build for the future. With our CAPS training, we are able to offer accessible home designs and modifications for our clients with special needs or disabilities.

    If you have contemplated and dreamed of an addition to your home for years and now find it's time to make a decision to move forward let us help you.  Certain changes in your lifestyle may have dictated an expansion.  Your living space has grown more crowded over time with additional family members being added as children, extended family members, or  an elderly family member.  Any and all of these life changing situations can add stress to your daily lifestyle creating the need for additional living space or home improvements in Austin.  As our children grow older they generally require more space and sometimes privacy.  This sparks a need for an additional bedroom space once an aging relative or spouse requiring special care is introduced into the original home's square footage. Privacy can truly become an issue if only to keep everyone happy while underneath the same roof.  Perhaps even private entrances will be required for some of the home's new residents.  These private entries could  be required to begin a new accessible route if there are ADA compatibility issues involved. 

     T-Square Company is a local design/build General Contracting firm registered with the City of Austin, Texas.  We have a competent team of in house craftsmen for your structural job aspects.  They are complemented by a force of long time affiliated subcontractors holding a masters license with the State of Texas. We are certified accessibility experts holding  nationally accredited CAPS and Universal Design (UD) certificates to assist in removing any architectural barriers limiting mobility within your home.  We offer complete home modifications for independent living for our aging in place customers in Austin.  Let us show you how to adapt your home to fit your ever changing accessibility needs.  Perhaps an expansion to a defined living space would solve a changing living situation.  How can this be accomplished without altering your home's basic footprint?  How can you go about this without a costly addition?  Maybe it's time to look under the hood, so to speak, for a solution that is right under your existing homes roof line.

    How about pushing a certain room's perimeter out into your existing unused attic space to create attic remodeling?  You can expand a small child's bedroom space to create a play or activity room.  Storage needs can be met by taking in part of the attic to create a closet or other additional storage area.  Entertainment areas can be created without taking square footage out of the living space once the equipment is installed beyond the existing inner wall line into the attic space.

    How you accomplish adding this additional square footage can be quite easy if you obtain the advice of a qualified building professional.  Any reputable residential building contractor can give you direction for such a task so that your roof's structural integrity is not put in jeopardy.  You must not under any circumstance interrupt the structural balance of your roof.  Not only could you cause a structural failure of the roof itself but other areas of your home could be affected by this interruption in stability.

   Whatever your situation please rely on the experiences of a local building professional.  Check out their credentials and references over merely price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor play the part of a general contractor because his knowledge will be limited to that of the cabinets and not much else.  You get what you pay for with proper planning.  Call T-Square Company today at 512-444-0097 for a complete design/build experience for the home remodel or addition you've longed for.

    Universal design refers to broad-spectrum ideas meant to produce buildings, products and environments that are inherently accessible to older people, people without disabilities and people with disabilities. Universal Design adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. The reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design approach is appealing to all users no matter their age, size, or physical well being. Universal Design is important because our current design standards for housing do not address the design needs of more than one third of our population.  Too often the designers of homes allow the built environment to define the capabilities of the resident.  Universal Design allows for our antiquated architecture to be defined by both our changing human needs and abilities.

     There are seven criteria or principles which must be met to be considered a universal design no matter which area of the home you are referring to. Any design must be equally useful to everyone, have flexibility in it's usefulness, be simple and intuitive, be perceived by everyone, have a tolerance for error, require little physical effort, and it must maintain an adequate area for approach and use. Any complexity or discriminating attribute to a design will doom it in terms of  being considered universal in nature. However what better way can you improve on a home's total visitability by everyone? Universal Design is the design of products and environments to be usable by all people, to the greatest extent possible, without the need for adaptation or specialized design.

     Whether you refer to this revolution in housing today as accessible design, inclusive design, or universal design it is all about making a home safe, attractive, and easy to use for all of the inhabitants. It has nothing to do with the age, agility, or status of life for anyone living within the home. The main intent of this way of thinking is to be sure the inhabitants are able to enjoy their home throughout their entire lifetime utilizing the universal design principles which have been designed into their home when it was built. This way aging in place can be accomplished without the expense and hassle of having to make periodic changes to the home to meet a person's ever changing physical needs. You can plan for all stages of your life cycle with some fore thought which, once discovered, you find is just common sense. Even if you are in perfect health you can be disrupted by a minor mishap. A more serious injury can change things forever when you no longer have all your abilities.

     Universal Design principles do not equate to accessibility design even though they both are concerned with ergonomics and human function issues. The ADA guidelines for accessibility were created as a means to help those people with extreme disabilities within our society who are a narrow and specific cross section of the masses. A UD approach broadly takes into account moderate impairments or disabilities, temporary health conditions, and the varying abilities of anyone within a home regardless of their age or size. In other words, an ADA accessible home would be designed for the one person with the disability whereas a UD home is designed for everyone and should be used with any custom tub shower conversion.

     Home accessibility should be a concern no matter what your age. If your concerns are not for you, barring any life changing accident, they could concern the accessibility and safety of another generation's independence. As we age, our society is beginning to realize that our homes need to accommodate future life changes. The aging in place phenomena deals with home modifications to existing homes while a universal design home would hardly ever need to address these abrupt issues even though we cannot solve all the future issues for everyone. Everyone ages differently and has their own list of specific needs.

Universal Design Techniques

     A sensible checklist for a home concerning Universal Design would include but is not limited to:

1. Limiting stairs while avoiding sunken rooms or multi-story floor plans with raised entrances

2. Automating lighting while controlling groups of lighting throughout the home

3. Including natural lighting through doors, windows, and skylights

4. Using multiple shower heads in the shower with rain, conventional and hand held units

5. Incorporate curbless showers into the design of your bathroom for ease of entering no matter if a wheelchair is ever involved

6. When deciding on your faucets, door handles, or cabinet pulls always pass the closed fist test for operation

7. Use nonslip flooring especially in wet areas using cork or smaller floor tiles which in turn increase the grout lines

8. Create a correct kitchen work area with the shortest distance between the stove, sink, and refrigerator as possible

9. Provide accessible lower storage in base cabinets storing the most used items on pull out shelving or in drawers

10. Lower your upper cabinets to 15" above your 34" universal cabinet top

11. Leave at least 42" between your cabinets when 48" is much better

12. Have multiple height cabinet tops to double as work surfaces for those who are seated or other little helpers in the kitchen

Universal design ideas do not strictly deal with accessibility or aging in place design and does not implement precise ADA standards but it does offer flexibility to add accessories now and later to those planning ahead or to the end user. It also provides for a wide range of human performance characteristics for the way people use spaces within their homes including well integrated usability features. These adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. That reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design build project is appealing to all users.

Aging in place home modifications are available through T-Square Company in Austin. Each universal design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin to prepare for the accessible second chapter of your life while remaining safe and secure in your existing home.

CAPS 1636580

     If you have been considering a home remodeling project and have searched the general landscape, you're probably  familiar with the terms Universal Design and Aging in place. Some people use these words interchangeably, but while they are similar, they do differ. Both are specific design techniques used to make a home more comfortable for individuals of different abilities.

     Aging in place design is mostly used for homeowners who require home modifications to allow them to remain in the home safely and comfortably as they age and their physical abilities change over time. Universal design is a much broader term covering the design of products and environments that are usable by all members of the household, from the youngest to the oldest, to the largest extent possible, without the need for further alterations, adaptations, or specialized design.  Universal Design provides a pathway to seamlessly age in place.  It is truly thinking ahead when it comes to accommodating the living environment for better home access.

     Young and middle aged homeowners should begin to think about incorporating universal design or aging in place aspects as they periodically accomplish renovations or updates to their homes. It is easier and more affordable to think ahead and include accessibility and future ease of use as part of a planned renovation than to add these elements later in life. Planning ahead is important for everyone, no matter their physical abilities. Remodeling your home to age in place later by enlarging doorways, a roomy bedroom suite, or a full bath which incorporates a walk in shower requires effort and money. Don't wait until it's necessary forcing a full blown costly remodel. Including universal design elements and aging in place amenities early on is not only smart planning, but it also is virtually undetectable.  If done correctly, it will accentuate any style, and should you sell your home, can add value for potential buyers because the group of buyers increases with accessibility.  Universal design elements are often incorporated into aging-in-place renovations.  Implementing universal design principals is the perfect way to meet the needs of everyone from the multi generational family to first time home buyers and includes elements for those who are disabled including mobility issues, impaired sight and more.

     Aging in place remodeling is used to modify a home as the homeowner matures.  It provides continual access and maneuverability to the home immediately. Aging in place is not age related. The design is convenient and comfortable. Some modifications are noticeable like replacing the bathtub with a roll in shower with grab bars or replacing exterior stairs with a ramp.

    Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     Universal design came about because disability is common during our lifetime and homes are best designed with accessibility for everyone.  At some point disability affects most of us in our lives. If a design works well for the disabled, it works equally well for everyone. With universal design thoughtful aesthetics and usability are harmonious.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist.

      Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

     Universal design is more of a blanket design category that is focused on aging in place remodeling later. It is a design approach that ensures the homes and commercial buildings can be used by virtually everybody, regardless of their level of ability. By using universal design, people who are very different can all enjoy the same space as their living space evolves with them during their lifetime. It's a design technique that ensures that a home will be there for the entire family even when their personal needs change.

     Universal Design/Build projects and Aging in place home modifications are available through T-Square Company in the Austin area. We have an A plus rating with the local BBB and have over 30 years of remodeling experience. We are a certified aging in place specialist offering complete aging in place services.  Each design/build situation will be customized to fit your personal needs to increase your accessibility. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

ADA wheelchair ramp guidelines are as follows:

• The minimum ramp width must be 36 inches minimum but 48 inches is preferable.
• Ramps must have edge protection to keep anyone from slipping off their surface in the form of a raised outer curb or railing.
• All wheelchair ramps must have level or flat unobstructed landings at the top and bottom of the rise being overcome that are 60 inches by 60 inches to provide a proper five foot wheelchair turning radius. The landing areas cannot have more than a 30 feet long ramp separating them. If the rise distance requires longer than a 30 foot run to overcome it then a series of landings can be used creating a switchback design.
• Thirty six inch handrails are required on both sides of all ramps that rise steeper than 6 inches from the ground below.
• All surfaces must be slip resistant and stable.

     A wheelchair ramp is basically an inclined plane installed in addition to or instead of stairs. Ramps provide wheelchair users or users of other mobility aids as well as people pushing strollers,carts, or other wheeled objects, better access to any building. When designing a wheelchair ramp, you need to consider the users physical limitations. The ramp should be wide enough to be safe and maneuverable and sturdy enough to carry the weight of an electric wheelchair and it's cargo (this can approach 6-700 pounds in many instances) and have a slope that is gradual enough for a manual wheelchair user to navigate. 

     Let's say your front porch is 24 inches tall and you are needing easier access to your home while using a wheelchair or walker. A straight ADA prescribed 1:12 ramp will let you overcome the 24 inch porch rise over a span of 24 feet. This is as steep a ramp that is allowed but it may not work for everyone and it may need to be of less slope as in 1:16-1:20. However, if your porch is 36 inches tall, a maximum thirty feet long straight ramp will overcome only 30 inches of the rise of your porch and the remaining six inches can be overcome by an additional six feet long ramp which occurs only after a five feet by five feet flat turning area is installed. This is referred as a switchback and the additional six feet ramp can be added on any face of the flat area. It can be installed as a straight run or as a ninety degree turn in either direction. If adequate room isn't available for the above scenario, then the switchback can occur along the path of travel anywhere as long as the approaching ramp doesn't exceed thirty feet in length which is a maximum. Don't forget to include another flat 60" by 60" landing at the front door and at the end of the incline ramp to allow for greater maneuverability and door operation.

     Upon entering the home, you can begin the accessible route which is designed to take you through the home to the most visited areas like the bathroom, kitchen, and living areas in that order. Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.

      The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.  Schedule an appointment by calling 512-444-0097 today.

     Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  If you can reach the front porch approach without obstruction then you have a great start since the stairs leading onto the front porch can be another matter all together.  A correctly designed ramp having a 1:12 slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations and physical limitations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way which starts the new accessible route within your home.  Rolling over any vertical threshold height greater than 1/2" is also difficult to maneuver.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     A traditional home builder has never truly considered the special needs of the disabled or aging within any home design. Unfortunately the design emphasis is always put on aesthetics and takes for granted everyone's mobility.  There certainly are no guarantees or clauses within any home's sales contract that will prevent our future personal life experiences from  introducing us to at least a temporary disability.  Accidents will always happen and you could find yourself having to utilize a wheelchair or walker to facilitate your independence for mobility.  Limitations in our mobility or constantly changing needs experienced by both the disabled and the elderly have sprung a new dimension in construction known as ADA remodeling to accomplish increased accessibility.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics. 

     An accessible bathroom for the user's convenience and safety becomes the first issue for anyone using a wheelchair or walker for either a short time while recovering or for the rest of their life.  The disability access bathroom will be located within the home's accessible route.  Any architectural barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom.  However, anything below three feet does not meet the 32 inch required clear width needed for clearance of a wheelchair. This work may involve framing alterations and moving light switches.  The electrical changes should be done by a licensed electrician assuring your safety.

     A completely serviceable special needs bathroom must contain at least one ADA vanity and the accessible route must be defined.   The vanity must be one with a clear underneath scald protected area having an unobstructed roll under capability for wheelchairs.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture.  A five foot turning radius allowing the wheelchair to maneuver into any approach must also be associated with the ADA vanity.  A 36x48" clear approach area to the vanity must be observed and this can overlap the five foot turning radius.  The area of travel will then be enhanced by an unobstructed clear accessible barrier free route dedicated to reaching the vanity. 

     Bathroom cabinets in Austin vary by style and usability.  There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink.  ADA sinks with a rear drain location provide for better plumbing drain hook ups.  This modification has everything to do with both the water supply lines and the waste line connecting the sink.  There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink.  These connecting pipes may become heated merely by the water passing through them creating the problem.  The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user.  The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes.  This pipe concealing panel must be installed at the correct wheelchair user clearance angle.  This allows for the needed unobstructed legroom required for the  user.  The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability.  This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance.  Clear unobstructed reach distances around the counter top area must be observed.  Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users.  If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.  Furthermore, automatic flush valves should be used on all toilets and urinals that provide for hands free use.

     Finding a contractor familiar with the guidelines of Elder construction and accessibility remodeling can be quite difficult. Be sure to check out the credentials of any potential bidders you contact.  Be sure they understand that the alterations you are seeking are for wheel chair accessible home remodeling and modifications.  Furthermore be sure this person knows and practices both the federal and most importantly your state's requirements before entering into any contract.

     Aging in place home modifications are available through T-Square Company. We are a certified aging in place (CAPS) specialist.  Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     Let's face it, accessible homes are needed by all of us at some time in our lives.  This is true whether it's for ourselves, a family member, or a guest.  The need is certainly not driven by age but is a result of life's experience.  Any family living with disability among any of the generations within it's group can always benefit from additional accessibility.   This will in turn increase safety and independence for all involved as they go through life. 

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on. Physically challenged has become the more socially accepted description of a person with an impairment.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination .  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  Austin handicap remodeling is imperative considering bathroom remodeling includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design for a handicap accessible bathroom remodel.

     Designing for specific physical conditions will lessen the impact of say arthritis, restricted mobility, or loss of vision by using a combinations of products, concepts, and techniques. A trained CAPS specialist is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your aging in place project and what's more, keep you in your home.

     The costs involved for handicap home modifications in Austin are really dictated by the amount of barrier free accessibility required by the person needing the assistance to be safe.  Comfort and safety for the home's inhabitants are key issues when designing an accessibility remodel.  Most homeowners nationally spend between $3,800 and $14,000 with a mean average expense of $7,500.  This cost again is based on the individual home modifications providing the greatest safety for those in need.

      Falls and slips are among the most common causes causes of injury to senior and elderly people requiring disability access remodeling.  Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home.  It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly.  If you are on a tight budget and can only afford a few modifications, the bathroom is the first place to begin an accessibility remodel.  The most basic improvements to enhance safety issues are fairly inexpensive. 

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

Aging in place home modifications are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS 1636580

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on.

     The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  By 2019, all the 76 million baby boomers will be age 55 or older at a time when many people are planning for retirement.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  Bathrooms can be both functional and attractive when planned with elements like cabinetry that allow someone to sit at a sink.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value appealing to multiple generations, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, custom tub to shower conversions, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place is the bathroom, the kitchen, and the family area.

     Your existing bathroom may feel claustrophobic.  The solution may be to either rearrange the existing space or design a more accessible bathroom which extends beyond the existing bathroom layout.  The second way will give better access for walker or wheelchair turns and approaches to all bathroom fixtures.  You may have to give up a closet, porch, or part of another room to accomplish the best result.  Bigger is always better when mobility devices are being used.

     Curbless roll in showers are advised for everyone on a universal level and not just for the users of wheelchairs or walkers.  At the very least, observe a low profile shower base of 2" or less in height at the curb to keep people from stepping over into a walk in shower.  The wheelchair accessible or universal designed shower should contain at least a shower wand mounted on a sliding bar to be available for varying heights of use coupled with a regular height fixed shower head. A diverting valve should be used for controlling each head.  Remember you are burying the valves within the walls of the shower so choose high performance brands of fixtures when making your choices.  Folding seats and benches can make your shower more enjoyable and safe. They are also useful if caretakers are involved or temporary assistance is needed.  Secure grab bars withstanding 250 pounds of force located around the shower perimeter  will increase the safety factor and prevent falls.  Grab bars should be installed at 34-36" height above the floor.  Shower niches 48" above the floor will help prevent clutter aiding in fall prevention and safety.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. A true ADA compatible roll in shower should be 60"x60" for the total floor area when possible which will provide additional space for caretakers.  A minimum of 48"x48" is a little more cramped but is acceptable by VA guidelines.  If a tub shower conversion will be executed then the depth of the new shower should be no less than 30" clear.

     A glass enclosure will provide a revived look for your new shower.  The more expensive frameless models will bring your bathroom completely up to date.  A single splash panel or wall can be installed toward the shower head wall.  Any shower entrance should be no less than 32" in width but remember wider is better when it comes to accessibility.  Glass is available in many finishes and textures but clear is the most popular choice.

     Lighting in the shower is also very important.  An LED recessed shower can light should be installed in the shower ceiling.  Additionally, concealed colored LED lighting can be used in the shower for mood.  There can never be enough lighting when performing tasks while showering or during clean up.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.