No matter how old you are you should periodically evaluate your residence to determine whether it suits you not just for the present but the future. Your home assessments will be rethought every time your living situation changes. Whether childproofing for a newborn, making a home more accessible following a sickness or unfortunate accident to someone in the family, or making a toilet area safer for an aging residing parent, there will be an immediate evolution to your primary domicile. These same life span design features are even more important if you believe you're past the age of wanting to move and are relishing the thought of aging in your own home, no matter what physical limitations you might later develop.  Incorporating smart aging design concepts into accessibility home modifications for a home's elder design  will attract a larger group of buyers when you decide to finally sell your home.  Accessible home modifications have become a major component within the housing industry when considering our senior homeowners.

    Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on. Physically challenged has become the more socially accepted description of a person with an impairment.  If your home needs modifications for a disabled child, remember that each type of disability is different and each requires special modifications to the house.  This statement also holds true for aging adults.

    Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our society experience a need for elder construction having significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination.  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

   When mobility becomes an issue for any homeowner or family member, regardless of age, the question arises concerning physically moving to a different home on one level with at least a bath that is more accessible. Austin handicap remodeling can help in preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move. Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country.  Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of accessibility to those very people inhabiting them.  The situation will only become ever more expanding in time.   When these homes were previously purchased,  they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions.  They housed our families, our memories, and our stuff.  They represented a place where we could be ourselves.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA. Remember that a more open space gives room for maneuverability while using any mobility aid required.

   There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist who is also a reputable residential remodeling professional.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

     Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  While an estimated 80% of aging homeowners have a firm plan to age in place, everything requires the proper clearance and distance for a new customized accessible route in your home to function properly provided by wheelchair remodeling.

     The concept of successful aging has become increasingly important as senior citizens begin to dominate the population. An active engagement in life through participation in social and productive activities is one component of successful aging. The built environment directly impacts the engagement profiles of older adults so it is necessary to provide environments designed to suit the needs of aging adults. Of all the design theories that attempt to accommodate the aging process, universal design may be the most desirable option as it provides built environments that benefit everyone. Universal design is a promising voluntary philosophy that requires increased attention from designers and builders participating in aging in place. Taken as a whole, it is evident that the application of universal design to the built environment is a positive step toward successful aging.

  But you say to yourself that  your needed aging in place home modifications basically require general home remodeling in Austin, Texas or in any other town for that matter.  Aging in place services provided by a specialized remodeling contractor holding a national CAPS certificate is who you need as a partner to insure that  the accessibility issues of your home are solved correctly.  With over 30 years of remodeling experience I obtained my registered CAPS certificate.  By offering a design/build firm to my aging in place customers, I get personal satisfaction from giving my clients their independence back while the remain in their existing home.  Without the training required to earn the CAPS certificate on top of my decades of building knowledge I could not offer my customers such a thorough and complete solution for solving their accessibility issues.  Only an experienced qualified remodeler holding a CAPS certificate has the qualifications to design an accessible route and perform the construction required to make it safe and functional for the Aging In Place customer.  There is nothing more rewarding than seeing a person with mobility impairments be able to independently roll into his or her shower and be a part of that accomplishment.

  Let's compare the alternative costs associated with aging in place verses when you already own your home.   The more institutional alternative of assisted living accompanied by more medical expertise and staff training plus the access to emergency medical facilities is available as opposed to renting an apartment.  These are two of the main alternative choices for seniors who decide not to remain in their own homes.   According to a national study done in 2014, the average cost for assisted living ranged from $3,000 to $3,500 per month.  However, if you decide to age in place in a high quality one bedroom apartment, the rent will run around $1,300 per month.  Seniors living in their own home or with loved ones represents a preference by most seniors and property taxes must be taken in account.

     An average Aging in Place bathroom home modification providing total accessibility given there is a large space to remodel at onset will come in around $30,000.  This can vary in many aspects if there is not enough room to change the existing floor plan.  Smaller bathrooms can cost $15-20,000 but will not have the barrier free accessibility as the larger modified bathroom.  Fully accessible kitchens will run on the average of $50,000 depending on the size of the existing kitchen.  These are both one time costs for sustainability of a given lifestyle and location providing future independence and safety for the homeowner who participates in accessible home remodeling.  A wheelchair accessible roll in shower alone can cost $15,000 depending on the given plumbing situation and the size required for maneuverability. Many aging homeowners are more than willing to accept these costs if the modifications will give them the freedom to age in place.

     There are five criteria which must be modified in a home to provide a highway for aging in place.

Widen Doorways

If a senior relies on mobility aids, such as a walker or wheelchair, to navigate through her home, widening doorways is a must-have home modification. Depending on the insulation and placement of electrical switches and outlets in the home, costs vary greatly for widening doorways.

Install Ramps

Exterior stairs may be a challenge for seniors who are unsteady on stairs or who have balance issues, so installing ramps is a necessary home modification that is well worth the cost to provide greater independence. CAPS certified contractors are trained in building and installing ramps of the correct height and slope for seniors.

Indoor threshold ramps are also necessary home modifications for older adults who use wheelchairs. These indoor ramps provide smooth transitions from one surface to another, making it safer to navigate throughout the home. The threshold ramps often are constructed of rubber, so they’re easily adjustable to accommodate the step or door jamb height that is involved in the transition.

Kitchen Modifications

As seniors age, they may find that their appliances are no longer in ideal locations and that their counter tops and cabinetry are too high, especially if they are in a wheelchair. Every appliance must be placed within the reach distance for a seated person between 18 and 48 inches.  Professional Caps certified contractors may need to come in and adjust the counter height and lower the sink, to allow for easier access from a seated position. Additionally, seniors aging in place often find it easier when microwaves are placed in microwave stands, as opposed to being at the back of the counter or in raised microwave cabinets.  Providing multi-level counter tops is a way to give accessibility to everyone in the kitchen.

Shower and Bathtub Modifications

A senior opting to age in place also should consider home modifications for the bathroom, particularly the bathtub. One option is a bathtub to shower conversion, which provides a much easier and safer entry and exit than a bathtub. A second bathroom modification option is to replace a traditional bathtub with a walk-in tub.

Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5 feet square clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the walls around the entire shower perimeter installed at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

If a senior wants to keep his existing bathtub, or cannot afford to replace it, there are less expensive modifications that can be made to prevent slips and falls in the bathtub. One modification is to add a grab bar to the tub, while another is to install safety strips. Both of these simple modifications can help prevent slips and falls in the bathtub.

Yet another modification for the bathtub, which is less expensive than replacing the bathtub or shower, is to purchase a bathtub transfer bench. Transfer benches straddle the side of the bathtub, enabling seniors to sit safely on the bench while getting into the tub by lifting each leg, one at a time, over the bathtub wall. Getting into the tub while seated greatly reduces the risk of dangerous slips and falls for seniors. Some seniors who cannot spare the required bathroom floor space for bathtub transfer bench legs opt for bathtub chairs, which sit completely inside the bathtub. Seniors may be able to turn around and sit on the chair with both legs outside of the tub and then lift one leg at a time over the tub wall while seated.

Flooring Modifications

Flooring is another consideration for older adults making home modifications with the goal of aging in place. The first step is to evaluate the home’s existing floors. If the carpet is older and shaggy, you may want to consider replacing it with new carpeting that has a shorter nap. Seniors are less likely to trip on shorter-nap carpeting, and it’s also more suitable for seniors who navigate through the home with the use of a walker or wheelchair.

Hardwood, tile, laminate, and vinyl floors are smooth and may allow for easier wheelchair maneuvering, but they also tend to be more slippery than carpeting. People often use throw rugs on these types of flooring, so be sure that you either get rid of them or securely tape them down to prevent trips and falls.  Using the proper tile with an acceptable coefficient of friction will prevent slipping even when wet.

     The best way to prepare for aging in place is to have a definite plan considering all possible outcomes and needs for those involved.  Aging in place isn't for everyone like those with major health issues.  For others with more independence, it can be a practical decision providing quality of life and safety for many years.  Everyone's needs are different as we age and one must allow for flexibility and change for all future decisions.

     The best course of action to take when making home modifications for seniors aging in place is to consider all of the areas of the home that present the most trouble or concern. If there are things that are especially difficult for seniors, like reaching the counter tops or light switches, modify them. If there are potential tripping or falling hazards, eliminate them or modify them accordingly. Taking a proactive approach to modifying the home means that seniors can age in place independently while their loved ones have peace of mind knowing that their aging loved ones are safer in their homes.

      Construction and design professionals are taking advantage of the CAPS training across the nation. This designation is taught through the National Association of Home Builders in collaboration with AARP. CAPS connects responsible professionals with home owners who need these services on an ever increasing basis. CAPS is a nationwide initiative and all active CAPS professionals can be found at nahb.org/CAPSdirectory.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

 ACCESSIBLE BATHROOM WITH WHEELCHAIR ACCESS

     A bathroom designed for someone who is aging in place is very different than one based on aesthetics or home value. Remodeling when considering future needs requires intuitive thought and considerations before you begin. The issues to consider include a safe design having ease of use by everyone and the people who will be using the facilities. Remember that remodeling a bathroom will take time and effort and there will be costs involved. When someone wants to age in place it is worthwhile to explore a universal design bathroom design that is both comfortable and safe to use as the occupant’s personal needs change. The bathroom is one space in the home where safety is of the utmost importance. From the toilet, to the shower, the vanity, and onto the lighting, there are adaptations and products to help keep the bathroom a safe place for all.

     The goal of an accessible bathroom design is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences. All disability home remodeling or disability bath remodels must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist holding a CAPS certificate. Only an experienced qualified remodeler holding a CAPS certificate has the qualifications to design an accessible route and perform the construction required to make it safe and functional for the AIP customer. Accessible bathrooms with custom walk in showers and kitchens are available using the right education and experience. Never consider hiring a "jack of all trades but master of none" type handyman to tear your bathroom apart. What's more, you certainly do not want to witness such a person struggling to piece the room back together attempting to achieve your long desired bathroom remodel idea. If so, you will absolutely learn a hard and invaluable lesson in getting what you pay for by accepting the handyman's cheapest bid.

     In 1990, The Americans With Disability Act (ADA) set forth the guidelines for accessibility within public and commercial buildings. We use these same guidelines today when designing for people's increased accessibility within their home since no laws exist for the residential marketplace. Most of the requirements are merely common sense when universal design techniques are practiced. For instance, the standards for toilets regulate the height, the clearance in front and to the sides, the positions of grab bars and toilet paper holders, and the operation of the flush mechanism.

     The height of a standard toilet is 17 inches or lower with 14 1/2 inches being the common height. The ADA guidelines mandate a distance between 17 and 19 inches from top of the seat to the floor on a handicap toilet. If the toilet is for use by children the height must be between 11 to 17 inches. The flush control is required to be on the open side of the toilet and should have easy one hand operation.

     If you're designing a bathroom for handicapped use, implementing ADA standards within the design make it easier for wheelchair bound people to maneuver around the toilet. Consider the placement of the toilet in relation to walls and barriers in the bathroom. Having a clear floor space with at least 48 inches between the walls on either side of the toilet to make it easier to negotiate the approach. The toilet should be positioned a distance of 18 inches from one of the walls to create an approach space on the opposite side of the toilet. If the lavatory is situated on a side wall it must be placed at least 18 inches from the toilet. Space requirements in front of an ADA toilet vary according to the placement of the toilet, but in general, you need about 66 inches from the back wall to the wall opposite the toilet which is almost standard in a bathroom dictated by the width of a standard tub. A clear five foot turning radius should be observed for maximizing wheelchair operations. Grab bars are required in all ADA compliant bathrooms or toilet stalls. You should provide them behind the toilet and on the side walls and they should be 33 to 36 inches above the finished floor. The grab bar lengths should be twenty four to thirty six inches behind toilet and forty two to forty eight inches on the side wall with the bar located two feet from the front of the toilet. Folding grab bars can be used when the side wall isn't sufficient and they fold up for convenient out of the way storage.

     No matter how old you are you should periodically evaluate your residence to determine whether it suits you not just for the present but the future. Your home assessments will be rethought every time your living situation changes. Whether childproofing for a newborn, making a home more accessible following a sickness or unfortunate accident to someone in the family, or making a toilet area safer for an aging residing parent, there will be an immediate evolution to your primary domicile. These same life span design features are even more important if you believe you're past the age of wanting to move and are relishing the thought of aging in your own home, no matter what physical limitations you might later develop. Incorporating smart aging design concepts into a home will attract a larger group of buyers when you decide to finally sell your home.

     When mobility becomes an issue for any homeowner, regardless of age, the question arises concerning physically moving to a different home with a bath that is more accessible or making the existing home modifications which will meet the need of the new life changes.Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country. Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of kitchen or bathroom accessibility to those very people inhabiting them. The situation will only become ever more expanding in time. When these homes were previously purchased, they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted as a retreat from life's tough interactions. They housed our families, our memories, and our stuff. They represented a place where we could be ourselves. Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nationwide and has been for several years as a sign of the times. Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities.

     Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individual’s personal needs. Home modifications making homes wheelchair accessible can increase safety, accessibility, and independence for people who want to live independently.

     Falls and slips are among the most common causes of injury to senior or elderly people and for those with a disability. Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home. It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly. Grab bar installation will greatly improve safety and usability of the bathroom.

     If the residence is fairly new and uses universal design techniques or the geographic area uses accessible housing standards, the walls in the tub area and the walls behind and next to the toilet should have extra blocking. Blocking is a structural reinforcement within a wall that allows a grab bar to be attached securely to withstand a 250 pound force. Studs can also be used but may not be located in the most desirable location for the length of the grab bar being used. The purpose of a grab bar is to help support a person, and the grab bar must be able to support a person's weight until help arrives or the person can right themselves. A grab bar is both pulled and pushed against.The standard size for a grab bar is 1-1/4 to 1-1/2 inches in diameter and should be 1-1/2 inches away from the wall. With some new construction, blocking is placed in the walls such that grab bars can be installed easily at a later date when needed. If there is no blocking in the walls, it can be added later but the wall must be open up to expose the studs. The recommended type is 3/4 inch plywood, 6 to 12 inches wide and nailed into the studs or a 2 by 6 or 8 inch block nailed into the studs. Today, grab bars come in many metal finishes and decorative shapes. Contrasting colors are easier to see in an emergency. Grab bars with a slight milled in texture are easier to grip. The blocking should be the full length of the tub and at both ends. This allows grab bars to be installed anywhere in the area or in more than one place. Never install grab bars on an angle where wet hands can slip. Grab bars should exist on all sides of the shower and tub walls. At the toilet, the blocked areas should be behind the toilet and on at least one side. If there is no wall next to the toilet, an L-shaped grab bar can be installed by attaching the front end to the floor and the back to the wall behind the toilet. All grab bars should be installed at the universal height of 34-36 inches above the finished floor. Folding grab bars can be used when adjacent walls don't exist in a 24" reach distance for a seated person.

     Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home. The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner. This includes both the home and the components within the home being accessible to all inhabitants. Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design. Universal Design is where we are headed out of necessity.

     Modifying your bathroom following practiced wheelchair accessibility guidelines is a great place to start any universal remodel. This will provide access for both wheelchairs and walkers. Furthermore, you can help avoid many future injuries. Any wet area like the bath is the most dangerous of all your home's surrounding living space and is the most common area for falls and slips. Simply getting in or out of the tub or shower, using the toilet and sink, or just maneuvering over wet surfaces can be hazardous to your health. Installing properly positioned grab bars to increase safety is a great place to spend your money on a limited budget around the shower, toilet, and tub.

     Traditionally bathroom vanities were constructed so the finished cabinet top was 30” AFF above finished floor.This meant that taller people had to bend over and stand away from the sink in order to use it.This puts added stress on the lower back and legs diminishing the comfort factor.Typically bathroom vanities are 21" deep and approximately 29" tall. The depth is not a problem but most folks would prefer a universal design height of 34". Sinks shouldn't be mounted higher than 34 inches from the floor to the top of the cabinet top for an under mount or drop in model. The sinks should not exceed six inches in depth and should be installed within three inches from the front of the overhanging cabinet top edge. The ADA vanity cabinet or even a simple wall hung sink should have a knee clearance below of 27 inches high and be at a minimum 30 inches wide by 11-25 inches deep. A 9" high clear kick area (by 6" deep) at the floor should be maintained for a full height cabinet and be approximately ten inches deep according to the cabinet depth. Remember twenty four inches is the maximum reach distance while sitting in a wheelchair. The choice of sink styles depends on the personal preference of the user. Be sure the lavatory controls are easily controlled with lever or paddle handles and are capable of being operated with one hand and not requiring tight grasping, pinching, or pinching of the wrist. Knobs, discs, or ball type handles can be hard to operate by anyone with soapy hands and more so by someone having an arthritic condition or other ailments. The closer the sink valves can be toward the front of the sink the better. This can be accomplished by following the curved outline of the sink.

     Bathroom cabinets vary by style and usability. There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink. ADA sinks with a rear drain location provide for better plumbing drain hook ups. This modification has everything to do with both the water supply lines and the waste line connecting the sink. There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink. These connecting pipes may become heated merely by the water passing through them creating the problem. The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user. The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes. This pipe concealing panel must be installed at the correct wheelchair user clearance angle. This allows for the needed unobstructed legroom required for the user. The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability. This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance. Clear unobstructed reach distances around the counter top area must be observed. Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users. If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.

     To assure a clear floor space the lavatory must be installed at 24" from any side wall measuring from the center line of the sink. The distance from one sink to another if using a double lavatory layout should be at least 30" center to center. In the case of wall hung freestanding sinks the minimum distance between them should be 4" between the sink edges.  The clear floor space of 30 by 48 inches must be provided for accessing all bathroom fixtures and these areas can overlap one another. The adjoining and overlapping wheelchair turning space should be an unobstructed sixty inches in diameter. A wheelchair turning space could utilize a T-shaped space considering a sixty inch square having two 12"x24" areas removed from each corner of the square from the same side. This will be a 36" wide base with two 36" wide arms. T-shaped wheelchair turning spaces can include on one arm. In this case the clear width at the cabinet should be 36" to use the space as part of the T-turn.

     Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace. These new residential vanities do not need to look institutional even though they are wheelchair accessible. They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

     Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individual’s personal needs. Home modifications making homes wheelchair accessible can increase safety, accessibility, and independence for people who want to live independently.

     The toilet is a uniquely useful fixture in the bathroom for waste disposal.Toilets are typically chosen to match the rest of the plumbing fixtures within the room. These waste ridding devices have evolved very little over the years but require hand strength and agility to be operated correctly. They are not manufactured with accompanying handholds compounding to the difficulty of some users. The seat height of toilets is a critical consideration with respect to comfort and are now available in increased heights ranging from 18-19 inches in height eliminating the deep knee bend or back aches needed for seating. This is a wider accepted choice than the toilet heights we have grown accustomed to at 14-15”. Additionally raised or elevated seats can be installed if needed.  These will provide an additional five inches in height but the elevated seats will most assuredly cause problems if children are also using the facilities. However, lower seat heights are problematic and can also hinder the ease of transferring from a wheelchair and back again. Assisting electrical power toilet lifts with attached grab bars can help raise and lower the user if required. Grab bars should be installed on at least two sides of the toilet. All grab bars must be secured into either adequate wood blocking or existing wall studs so they can hold at least 250 pounds of downward force. Creating a toilet within an open area which is approachable from both sides and not in a closet is much more accessible. Accessible toilets should never be placed in small alcoves. The old idea of placing them within a private room works well for those with a full range of mobility.  They should have a minimum clear width of 60" optimally and sufficient space to accommodate a wheelchair to the sides of the toilet or in front for transferring to and from the toilet. Toilet seats are also available with a heat feature and some have the ability to self-close or have a night light. Wall mounted toilets offer more accessible areas underneath for cleaning versus floor mounted models but are more expensive and not a readily available. An add on bidet attachment installed on a regular toilet can be handy and help improve hygiene especially when a caretaker is involved.  This is a cheaper idea than a free standing bidet and also concerns precious space.

     Toilets need to have the flush handle located toward the middle of the room and be of the correct height for comfort. Proper clearance from any walls (18" from any side wall to the center of the toilet) must be observed and the clear 30 inch by 48 inch approach to the toilet must be maintained. Grab bars should be installed both on the rear and sidewall of the toilet at 34 inches above the floor. If no side wall is present within a reasonable reach distance from the toilet then you can opt for a folding model as in the above photo.  Any bathroom transformation needs to include universal design characteristics and be accessible to everyone in the home.

     Designing task oriented bathroom fixtures without consideration for their use, placement, or how they make up the bathroom environment makes up the current way of thinking universally.  The tub/shower, sink, and toilet are used individually and designing for the greatest approach clearance within clear spaces.  Observing minimal distance to traverse for each fixture location should take president within any accessible design.  This individual design will provide the greatest use of each fixture for the bathroom layout.  Emphasis must be placed on fixture placement to accomplish certain tasks but grouping these tasks where possible can be beneficial to everyone. The greater the proximity of the fixtures, the more efficient and convenient the design.  The universal bathroom can be a more enabling environment focusing on an individual’s capabilities with regards to the individual’s surroundings.

      Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  The threshold is the most dangerous component in any shower. Not only is it impossible to overcome in a wheelchair but it isn't safe for those who are vision impaired or those with mobility issues. Low threshold shower bases with add on ramps can solve the shower entry problem when the floor cannot be lowered to form a true contoured roll in slope. ADA compatible curbless roll in showers are at a minimum 5 feet wide by 3 feet deep while a 60 inch by 60 inch floor is optimum for most any situation. Using a 32-36" clear entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better. Upon exiting the shower a clear floor space having a five feet turning radius is desired. If the shower is deep enough and you can get by with merely a splash panel this will eliminate installing another architectural barrier represented by a shower door.  The roll in shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above both of which are regulated with a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a body spray head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats are useful if caretakers are involved. Sometimes it makes much more sense to have a moveable chair or bench, so you can enter and leave the shower or tub more easily. In other cases, it may be better to have a built-in option to which you can transfer. The only problem with making this choice is that you don’t absolutely know what specific issues you will have – nor the options you will prefer – in the future. Built-ins, along with enough room for removable selections, can be the way to go If you have the space. This gives you the highest number of choices possible as your needs change over time.  Most importantly, secure grab bars on wood grounds around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed shower can light fixture needs to be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. Especially if you live alone, falling in the shower or the bathroom can be physically devastating. It is also a frightening experience, and a lot of time can lapse before anyone discovers that you need help. Sometimes you can address this problem without making significant changes on your property. These include alarm systems that alert people to a fall, or arranging for someone to check on you at least once or twice a day. But not everyone who ages in place has these kinds of options.

     Remember, convenience issues are safety issues.  You must be able to move easily and safely to each part of the bathroom facilities, and you need to be able to do it conveniently enough that you are not tempted to do unsafe things. If your current bathroom is not safe, or you find that it is inconvenient, it may be time to seriously look at a remodel. 

     All new construction or any bathroom remodel should include an accessible shower with head combinations in multiple locations to fit anyone's desires.  Incorporating universal design principles into your home's custom walk in shower design can facilitate aging-in-place goals, while comfortably addressing the diverse needs of all ages and mobility levels using your home. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting and relaxing.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathroom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower that is being used specifically in homes today where the owner is planning to retire.

     Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs which brought on the idea of wheelchair remodeling. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

    Designing around specific physical conditions for handicap accessibility will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. Working as a team, a trained CAPS specialist along with any family caretakers or therapists is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS  or Certified Aging In Place Specialist certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your accessibility or aging in place project and what's more, keep you in your home longer.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

     Remodeling a bathroom for someone who is aging in place is very different than one based on aesthetics or home value. If you or a loved one are remodeling with an eye toward future needs, there are some very important issues to consider before you start and as you’re going through the process. From design, to safety, to ease of use, remodeling a bathroom will take time and effort, and there will be costs involved. But for anyone who wants to age in place it can be very worthwhile to have a bathroom that is comfortable and safe to use easily as needs change.   

     All new construction or any bathroom remodel should include an accessible shower with head combinations in multiple locations to fit anyone's desires.  Incorporating universal design principles into your home's custom walk in shower design can facilitate aging-in-place goals, while comfortably addressing the diverse needs of all ages and mobility levels using your home. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting and relaxing.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathroom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower for a roll in shower that is being used specifically in homes today where the owner is planning to retire.

     Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs which brought on the idea of wheelchair remodeling. Home modifications can increase safety, accessibility, and independence for people who want to live independently.  Convenience issues are safety issues.  You must be able to move easily and safely to each part of the facilities, and you need to be able to do it conveniently enough that you are not tempted to do unsafe things. If your current bathroom is not safe, or you find that it is inconvenient, it may be time to seriously look at a remodel. Especially if you live alone, falling in the shower or the bathroom can be physically devastating. It is also a frightening experience, and a lot of time can lapse before anyone discovers that you need help.

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

    Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  The threshold is the most dangerous component in any shower. Not only is it impossible to overcome in a wheelchair but it isn't safe for those who are vision impaired or those with mobility issues. Low threshold shower bases with add on ramps can solve the shower entry problem when the floor cannot be lowered to form a true contoured roll in slope. ADA compatible curbless roll in showers are at a minimum 5 feet wide by 3 feet deep while a 5'x5' floor is optimum. Using a 32-36" clear entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better. Upon exiting the shower a clear floor space having a five feet turning radius is desired. The shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above both of which are regulated with a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats are useful if caretakers are involved. Secure grab bars on wood grounds around the entire shower perimeter at 34-36" above the finished shower floor increasing the safety factor and helping to prevent falls.  A shower can light fixture needs to be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. 

    Designing around specific physical conditions for handicap accessibility will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. Working as a team, a trained CAPS specialist along with any family caretakers or therapists is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS (Certified Aging In Place Specialist) certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your accessibility or aging in place project and what's more, keep you in your home longer.

     Peace of mind is more important than the cost, as long as you can safely afford your bathroom remodel. You’ll probably want to hire a contractor if you need to move plumbing or electrical around, since that can be difficult and dangerous. You may also need permits, and it’s sometimes easier to just let a contractor handle all of those things. New flooring, a need to move a vanity or a wall, or any type of framing or re-framing of a space or moving of facilities will generally need a contractor, as well. It’s not something most people will comfortable doing on their own. Many contractors are willing to work with customers on an aging in place remodel because they see the importance of that person’s continued independence.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on.

     The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  By 2019, all the 76 million baby boomers will be age 55 or older at a time when many people are planning for retirement.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  Bathrooms can be both functional and attractive when planned with elements like cabinetry that allow someone to sit at a sink.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value appealing to multiple generations, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, custom tub to shower conversions, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place is the bathroom, the kitchen, and the family area.

     Your existing bathroom may feel claustrophobic.  The solution may be to either rearrange the existing space or design a more accessible bathroom which extends beyond the existing bathroom layout.  The second way will give better access for walker or wheelchair turns and approaches to all bathroom fixtures.  You may have to give up a closet, porch, or part of another room to accomplish the best result.  Bigger is always better when mobility devices are being used.

     Curbless roll in showers are advised for everyone on a universal level and not just for the users of wheelchairs or walkers.  At the very least, observe a low profile shower base of 2" or less in height at the curb to keep people from stepping over into a walk in shower.  The wheelchair accessible or universal designed shower should contain at least a shower wand mounted on a sliding bar to be available for varying heights of use coupled with a regular height fixed shower head. A diverting valve should be used for controlling each head.  Remember you are burying the valves within the walls of the shower so choose high performance brands of fixtures when making your choices.  Folding seats and benches can make your shower more enjoyable and safe. They are also useful if caretakers are involved or temporary assistance is needed.  Secure grab bars withstanding 250 pounds of force located around the shower perimeter  will increase the safety factor and prevent falls.  Grab bars should be installed at 34-36" height above the floor.  Shower niches 48" above the floor will help prevent clutter aiding in fall prevention and safety.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. A true ADA compatible roll in shower should be 60"x60" for the total floor area when possible which will provide additional space for caretakers.  A minimum of 48"x48" is a little more cramped but is acceptable by VA guidelines.  If a tub shower conversion will be executed then the depth of the new shower should be no less than 30" clear.

     A glass enclosure will provide a revived look for your new shower.  The more expensive frameless models will bring your bathroom completely up to date.  A single splash panel or wall can be installed toward the shower head wall.  Any shower entrance should be no less than 32" in width but remember wider is better when it comes to accessibility.  Glass is available in many finishes and textures but clear is the most popular choice.

     Lighting in the shower is also very important.  An LED recessed shower can light should be installed in the shower ceiling.  Additionally, concealed colored LED lighting can be used in the shower for mood.  There can never be enough lighting when performing tasks while showering or during clean up.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.