The Basic Room Scenario

     A combination of six faces defines nearly any given room.  The four walls receive the most preparation since they are usually the focal point as one enters the room.  Much time is spent to achieve just the right color, texture, and appearance to create that lasting impression.  The fifth surface, the floor, is generally designed for durability and comfort keeping with the rooms color scheme.  It too has a great deal to do with the general feeling of the room and as such is always considered in conjunction with the walls.  The final surface at the ceiling level is hardly ever taken into account in the finish schedule beyond that of getting a coat of color scheme blending paint. 

     One may never realize this last face even exists until they are lying in bed staring upward at a very common and unimaginable sight.  This most recently neglected surface having  such great potential has simply been made boring with the invention and use of drywall.  The old out of sight, out of mind gesture kicked in following the sheetrock revolution.  Consulting with a residential construction professional in Austin can give you some workable ideas.

     Long before drywall was slapped upon the ceiling and left to disappear in monotony, ceilings were both ornate and beautiful.  Wood was generally used on the ceiling enabling beams, coffered units, and box ceilings to be limited only by creativity. Clap board houses had boarded ceilings covered with cheese cloth so that colorful wall paper could be hung.  Beaded and v-groove boards were another way to make ceilings interesting.  A metallic look was obtained using stamped tin panels of many patterns.  When all else failed and a homogeneous look was desired plaster was used.

     The look of fine cabinetry along with detailed woodwork and trim can be used on the ceiling to make any job more interesting and "kick it over the top".  You can combine creative  woodwork with faux or actual metal surfaces for that certain but different look.  Beamed and coffered ceilings also create a warm and rich feeling that is beyond the norm. Any use of these special ceilings will give any bath or kitchen upgrade a unique overall feel and look.  They can enhance bedrooms, home offices, libraries, vestibules or any room you'd like to reveal a looming accent. 

How would you like waking up to this Oak ceiling daily?

Try spending some of those building funds on the aspects that are only seen when you're at total rest and staring up into dullness!

     No matter which room you are wanting to upgrade, from kitchens to bathrooms, take everything into consideration because this is what represents your home to your visitors through their sensory perception. 

     Whether you're looking for a local residential remodeling contractor in Austin, Texas to accomplish a kitchen remodel or a construction professional to complete an entire gutting and remodel of your entire home including a home office transformation,  the final accenting finishes most likely will include the use of fine cabinetry. The choice between frameless European and Northern face frame cabinetry styles will highlight practically any design.   Choosing the correct wood species can further add to the richness of the job.  Then there are those needed additions that must blend while being added onto your home without notice.

      To begin with, kitchen upgrades and bathroom remodels return the most money at resale on the initial investment of the remodeling project.  National averages show that kitchen remodels recoup around 70% of the costs of the upgrade at the time of resale of the home.  However, your kitchen remodeling costs should never exceed 15% of the total value of your home.  Here is where you need to get your thinking cap on and plan for an affordable budget that is within your means.  Your material choices are very important and if you need to stay mid-level to fit the budget then do so.  The labor involved for the project will be around 1.6 times the cost of the materials used.  The total budget should allow $100 per square foot for your kitchen upgrade project.

     Any kitchen remodel will need to produce a better service or work triangle between the sink, refrigerator, and stove placement.  The shorter the sum of the triangle legs the more efficient the layout but islands can also be incorporated into the design to increase the efficiency.  The prep sink within the island can become it's own focal point of the work triangle displacing the duties of the main kitchen sink.  The orientation of the island toward the work triangle is very important making sure traffic can still flow freely within the designated triangle. Islands can contain all sorts of special storage areas.  Mixer lifts, produce storage drawers, wine storage, and dough board pullouts are just a few of the many useful aspects that can be incorporated into the island.

      Living with a dysfunctional bathroom layout reduces the total feeling of relaxation your master bath is capable of providing.   During those much deserved private moments you long for your bathroom's surroundings to provide both luxury and function.  There isn't adequate lighting for the many daily personal duties like applying makeup.   There needs to be adequate ventilation so you don't always feel as though you are housed in a "sweat box" while getting dressed. The outdated plate mirror extending from your vanity top's splash upward toward the drywall furrdown above has never been a design you thank the world of. You have always disliked that box above housing the poorly illuminating fluorescent tube lamps that are concealed by the yellowing plastic diffusing panel.  You are sick and tired of the poor storage facilities inherited when you purchased your home.  The height of the vanity is out of line according to your needs and it is also inadequate for your storage needs.  The existing cabinet layout contains unusable drawers beginning to come off their tracks and the cabinet doors have their own particular issues.  Your cabinets are either too deep to access what they contain or their storage capabilities have been limited by their total improper design.  What were those guys thinking?  What's more the out of fashion ceramic tiles are either partly missing or they are totally the wrong color for the day along with the colors within the rest of the room.  Having improperly working plumbing fixtures that are now also antiquated with their own set of problems is yet another quandary within itself.  The fixtures themselves can also be finished in a color that is long out of style.  So what do you do?

     It is well past time to undergo a fine bathroom upgrade and makeover.  Bathroom remodeling can either be a pain or a pleasant experience according to the participants involved.  Bathroom remodeling in Austin, Texas like most other cities includes many of the same aspects.  Be sure to choose a qualified residential construction contractor whose personality and qualifications are agreeable with you personally.  You are about to undertake a very important short term relationship in your life with someone you may know by reputation only.  The relationship needs to be comfortable and free flowing thus enabling the contractor's creativity level to be at it's highest during your remodeling project. Look at it as a partnership between your needs and the remodeling contractor's abilities.  His professional remodeling experience will include his capacity to identify many construction limitations and hazards.   These variables underlie the major pitfalls that can be avoided while making a bathroom remodeling design come into reality.  His experience can also aid you in accomplishing bathroom upgrades that include disability issues.  Accessibility is what the project is about anyway.  The job needs to flow between the various trades involved to produce a better final outcome.  This too is a reflection on his remodeling experience for which there is no substitute.

     Bathroom plumbing fixture choices are numerous to say the least.  Select reputable companies offering the best warranties especially when considering finishes used on control valve trims and the fixtures installed in the project.   Larger walk in shower designs should have seamless fiberglass liners to avoid leaks if the house ever shifts.  Using natural stone or glass tiles while additionally designing in glass blocks will certainly be an upgrade. 

     Colors for bathrooms today are natural and earthy creating a calming effect.  Accents of color reflected from the tiles, paint, fixtures, and woodwork are used to make things a little more interesting compared to the room's overall vanilla tones within your design.  Help is just a phone call away but be sure the one who answers has the qualified experience you need for completing your new bathroom transformation.

Residential Remodeling Creating A Custom Walk In Shower

     You have contemplated and dreamed of an addition to your home for years but now it's time for you to make a decision as to how you accomplish your basic needs for living.  Certain changes in your lifestyle have dictated an expansion.  Your living space has grown more crowded over time with additional family members being added as children, extended family members, or you may now find yourself having to provide care for an elderly family member.  Any and all of these life changing situations can add stress to  your daily lifestyle creating the need for additional living space or home improvements Austin. 

     As our children grow older they generally require more space and sometimes privacy.  This sparks a need for additional bedroom space alone once an aging relative or spouse is introduced into the original home's square footage who requires special care.   Here, privacy can truly become an issue just to keep everyone happy while underneath the same roof.  Perhaps even private entrances will be required for some of the home's new residents.  These private entries could  be required to begin a new accessible route if there are ADA compatibility issues involved. 

 

     It's time to find yourself either a qualified architectural firm and residential remodeling contractor or a local experienced residential construction contractor with in house design capabilities who can build what is designed.  The latter situation is usually your best shot at getting what you basically need to solve your living situation problems allowing you to cut out the beyond budget frills.  You will also save on the soft costs of your construction project that have nothing to do with the structual building process itself.  Many local residential contractors are quite capable of pushing out a wall in your home and putting a top on the structure.  This capability is based on both their experience and knowledge of all the building trades, especially the framing aspect that will be involved.  Actual experience in this particular facet of the project could proove to be very helpful for visualizing the construction and it's possibilities.  Has this contractor ever done this kind of project before?  Does he himself have skilled experience or does he appear to be a drive by limited contractor at the mercy of his subcontractor's capabilities?  Any depth of design is totally based on experience.  You will need to completely check out the contractor's references and any memberships in  local business organizations like the  Better Business Bureau.  What kind of rating does the residential remodeling professional have and how long has he been an accredited member?  Does the company have both general liability and Workman's Comp insurances and did the company offer you a certificate of insurance verifying their coverage.  You need the kind of information that can't be paid for and posted by the residential remodel contractor in question.  Don't be taken in by contractor listing  and referral sights that promise you successful and competent businesses.  They were listed there for one and only one reason, somebody paid for the listing fee.  Membership to national associations like NARI reflect only a self paid fee but says nothing about the contractor's experience and creativity.  That only comes from past customer's testimonials that you can fact check.

     Now how about the competitive bid prices you have collected?  A good rule of thumb is to toss out the lowest and highest numbers and go with the mid price.  This is true if and only if the company can pass the litmus test outlined above.  However, the project should be based on overall quality and remember you usually get what you pay for.  This situation will be solved with how the personalities of you and the contractor mesh together.  You must be able to communicate with this person who has come into your life throughout the construction process while keeping a level head for problem solving.  There will be problems because every construction and remodeling project has at least one.  There also needs to be a norm in the way the proposal is written.  Has the bidder been transparent and detailed to you in writing what is being covered within the bid?  Are there meaningful and fair allowances contained within the bid covering the materials that will be used but have no specifications as of yet?  You must do your homework before entering into any contract without regret.

    

     When you have finally decided to pursue a personal building project for your home and are now ready to hire a residential construction contractor in Austin, Texas you must first verify the company's capabilities and completion record.  First you really need to know just how reputable a business is before jumping on board with anyone. Is there an office or shop listed with a physical address and not just a P O Box.  The safest way to validate any contractor's record and understand their business is by utilizing free listings available from your local Better Business Bureau either through their website or via the telephone.  Any consumer can see if the contractor is not only a current member and for how long but if they  are an accredited member with a rating given out by the BBB based on track records of the contractor.  You can find out how long they've been in business and if there have any derogatory complaints against them.  You can be assured that no money has changed hands for receiving the accreditation grade which is based  on the total profile of the contractor's business.   Don't get caught taking the easy route to a decision blindly trusting posted lists of trusted businesses that are available on the internet .  Many say that no contractor can pay a fee to be listed on their approved sights; however,  a fee was certainly paid by someone to be listed or the web sight could not exist. 

     After checking out the local business listing on the BBB why not look into the business owner himself.   Linked In can provide you with some background on the business owner like educational experiences,  how long they've been in business, and other general knowledge.  Just how transparent is the business and is it in good standing?  Yelp is another web site where a free listing about a business containing testimonials has been posted by their clients.  You can verify if a business exists and find out more about them plus you can always ask for more references.

     Now that you know the business actually exists and the owner is both local and somewhat reputable,  you should take note in how they conduct their business.  Is the contractor trying to do the job without a city permit not being registered with the city and county or does he have both general liability and workman's comp insurance?  The old adage that "if there is a permit involved then my taxes surely will go up because of the improvements" gets shot down because city officials make sure the work is done in line with the accepted building code.  The time to obtain the permit and it's fees surely outweighs the costs of the judgments you would have had to bring against the incompetent contractor once his methods failed.  Now how about asking to see a current certificate of insurance for the company?  The contractor must have general liability coverage to cover any accidental physical occurrences while working on your home.  He must also have workman's comp insurance to keep any employees working on your home from suing you as the homeowner if they are hurt on the job.

     I tell my customers all the time that one of their main ways of choosing a residential building professional in Austin, Texas with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     T-Square Company can help you with kitchen and bath remodels, room additions, or simply making your home more accessible for you or a loved one.  Our design build projects will be customized to your fit your needs and are guaranteed to blend with your homes existing architecture.  Let our over three decades of remodeling experience work for you.

     After choosing your residential construction contractor you should never pay for everything up front.  Payments should be associated with aspects of the job and you should always get something for your money.  Soft costs like designs, permits, or fees can be paid in advance to get the project rolling plus any custom made entities or materials ordered and stocked on the job sight.  Never let the contractor draw ahead of what is actually happening no matter how much you are caught up in the building process.  Paying for a little overhead to a bonified construction professional will always cost more but usually saves you a lot in the long run.  It's not always about the cheapest bid because you'll always get what you pay for.  Get every aspect of the job in writing and both you and the chosen residential construction contractor must sign the document for it to be a binding contract.

!

 

 

    Life happens and your present way of going about it includes newly discovered physical barriers which were never an issue before.  You've lost your mobility and are now forced to rely on a wheelchair for assistance at least for the present time.  The maneuvering of familiar areas within your home you'd always taken for granted are now presenting barriers that are limiting your new means of mobility.  Clear openings of 32" or greater, elevation changes steeper than 1:12, and being able to have access to all your home's facilities have been affected springing forth handicap remodeling.  The removal of these home grown barriers that now disrupt your accessible route for handicap bathrooms in Austin, Texas needs to be done by a qualified building professional holding a CAPS certificate.  Any ADA remodeling should comply with both ADA and local building code standards along with the TDLR guidelines.

     Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  Given that you can reach the front porch approach without obstruction is a great start.  The stairs leading onto the front porch are yet another matter all together.  A correctly designed ramp having the correct slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way that starts the new accessible route within your home.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     An accessible bathroom for your convenience becomes the first issue.  The disability access bathroom will be located within the accessible route.  Any barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom and must be widened during a bathroom transformation.  Anything below three feet does not meet the clear 32 inch requirement mentioned above and will need to be altered for clearance of your wheelchair. This work may involve moving light switches.  These alterations should be done by a licensed electrician assuring your safety.

     Once inside the accessible bathroom you should try to maintain a five foot turning radius for your wheelchair if at all possible. You will need to have your plumbing facilities brought into compliance to enable your freedom and safety.  Bathroom modifications for the disabled involve the use of grab bars within the tub or shower and around the toilet which can be very helpful insuring your safety for maneuverability.  These should be installed at 34 inches above the finished floor to safeguard your use of them.  Having roll under capability for the new 34" high ADA compliant vanity can be very helpful while you are in the wheelchair.  Exact clearances should be complied with underneath the vanity.  The proper safety equipment should be installed on the plumbing pipes that don't allow scalding of your legs. The toilet may need to be replaced providing a comfort level height for easier access.  The handicap bath or roll in shower may need to be altered to become only a shower with roll in or possibly transfer capabilities. Roll in showers are always easier to deal with than handicap baths having walk in ability. However, these tubs are not for everyone especially those with dementia so do your homework before buying such an expensive addition to your bathroom.   All of these changes must be done along the  ADA guidelines for your safety.

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

     The referenced door situation above will be true for any room in the house if you are to enter them barrier free.  The kitchen, your bedroom, and any other rooms you require accessibility to enter could be affected.  Even the closet door within your bedroom will need to be wide enough so that you can manage getting your clothes to dress.  Any other bedrooms that you may need to enter with your wheelchair will need alterations.

     The accessible kitchen is another story altogether.  You will at least need the roll under capability as mentioned above at the sink.  Upper kitchen cabinet heights may become an issue if you still plan to do meal preparations.  No matter what you end up doing, make sure to hire an experienced building professional who understand the ADA guidelines for your well being.

     Aging in place home modifications are available through T-Square Company in the Austin area. We have an A plus rating with the local BBB and have over 30 years of remodeling experience. We are additionally a certified aging in place specialist offering complete aging in place services.  Each design/build situation will be customized to fit your personal needs increasing your accessibility. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

 

    

      

     Everyone ages differently and has different needs and wants.  The factors that constitute the aging in place market and senior home modifications for all individuals are based on a persons genetic makeup, their lifestyle including the choices they have made while living their life, and their environment.  These factors have brought about the need for universal design.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.  Since so very few homes share the accessibility offered by universal design, to satisfy the needs of a particular household member brought about by an accident, an illness, or simply the aging process there will always be a need for customized accessibility features.  This will be accomplished by a CAPS accredited remodeling professional producing a truly functional design.   This same competent home remodeling company who understands and practices aging in place home modifications in Austin should carry out the work to fit the design and insure your safety and accessibility.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination .  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness.  Some of our societal statistics that weigh into aging in place situations include reports stating that 19% of the population between the ages of 16 and 64 and 42% of those of us 65 and over have a physical disability affecting the activities of their daily lives.  For a progressive condition,  aging in place home remodeling in Austin definitely comes into play.  This is the only way to insure both the safety and mobility for the homeowner or family member requiring the home modifications.  The two main groups driving this aging in place market are those people who are 65 and over and the baby boomers.  The first group is projected to reach 55 million in 2020.  The baby boomer generation born between 1946 and 1965 today make up 28% of the U.S.  population and are made up of some 77 million people.  Modifications of existing homes is important because people of age 50 and older want to remain in their current home for as long as possible.  Aging in place home modifications in Austin should only be done by a CAPS certified remodeling company.  This is the only way that you can be assured that the home modifications are the right choices to satisfy your needs.  There is no need to waste money only to find out that the wrong alterations were done by an inexperienced and unqualified remodeling company.  Always check their credentials to verify that the remodeler holds a CAPS certification. All registered CAPS program graduates and their remodeling company will be listed in a national registry in Washington.  The information can be found by simply visiting nahb.org/CAPS.

     If you have been considering an aging in place design for a fine bathroom makeover or remodeling project in Austin there are a few things you should take into consideration.  Accessible home remodels and bathroom upgrades in Austin, Texas can take on many looks and facets.  The scope of work you choose to accomplish should effectively solve your problems and most importantly, your needs as the home owner.  The identification of these specific needs belongs to you the home owner.  The way your home is structurally altered to accomplish these needs is the job of the professional remodeling contractor.  Accessibility should be a concern no matter what your age.  If your concerns are not for you,  barring any life changing accident, they could concern the accessibility of another generation's independence is using the restroom.  Aging in place services performed by CAPS professionals in the remodeling industry can help with solutions in solving these issues.

     Whether you desire a roll in shower, accessible sink , or merely a clear and unobstructed access to your existing bath, a CAPS professional can help you increase your accessibility.  The CAPS certification holder can not only help you with the design of what you desire but is competent and professionally qualified to carry out any construction needed. Certainly there are many upgrades available when planning an accessible bathroom transformation.  The replacement of the tub with a new walk in shower can create a bold  look but will run you around $10,000 while a roll in shower will run around $14,000.  There are no spending limits for bathroom remodels.  You can plan on spending around $12,000 to $15,000 for a hall bath remodel.  The price tag can approach or exceed $35,000 for a complete master bath remodel.  The type of fixtures and building components chosen along with the labor will compose the overall cost of the remodeling project. These prices are based on long lasting home modifications requiring time to install using proper construction techniques and are not to be confused with pop in kits offered by others they claim will be accomplished in a couple of days.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professionals normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical expenses covering a worker's accident while on your property.  Don't forget that only a certified aging in place (CAPS) professional can help you solve your accessibility issues.used specifically in homes today where the owner is planning to retire.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

 

A Custom Roll In Shower Conversion in Austin, Texas