DETERMINING SLOPE RATIO

     To determine the slope of your ramp and how much horizontal space it will require, use the following calculation per the ADA guidelines: Multiply the inches your ramp will rise by the slope ratio you desire, and then divide the sum by 12 (to convert the horizontal space you'll need to feet). For example: 31-inch rise x 20 slope ratio = 620. That divided by 12 gives you a 51-foot horizontal projection.

ADA wheelchair ramp guidelines are as follows:

• The minimum ramp width must be 36 inches minimum but 48 inches is preferable.
• Ramps must have edge protection to keep anyone from slipping off their surface in the form of a raised outer curb or railing.
• All wheelchair ramps must have level or flat unobstructed landings at the top and bottom of the rise being overcome that are 60 inches by 60 inches to provide a proper five foot wheelchair turning radius. The landing areas cannot have more than a 30 feet long ramp separating them. If the rise distance requires longer than a 30 foot run to overcome it then a series of landings can be used creating a switchback design.
• Thirty six inch handrails are required on both sides of all ramps that rise steeper than 6 inches from the ground below.
• All surfaces must be slip resistant and stable.

     A wheelchair ramp can be permanent, semi-permanent or portable providing wheelchair accessibility. Permanent ramps are designed to be bolted or otherwise attached in place. Semi-permanent ramps rest on top of the ground or concrete pad and are commonly used for the short term. Permanent and semi-permanent ramps are usually of aluminum, concrete or wood. Portable ramps are usually aluminum and typically fold for ease of transport. Portable ramps are primarily intended for home and building use but can also be used with vans to load an unoccupied mobility device or to load an occupied mobility device when both the device and the passenger are easy to handle. Ramps can be constructed from a variety of different materials, though some are better than others and friction is of upmost importance.

     A wheelchair ramp is basically an inclined plane installed in addition to or instead of stairs. Ramps provide wheelchair users or users of other mobility aids as well as people pushing strollers,carts, or other wheeled objects, better access to any building. When designing a wheelchair ramp, you need to consider the users physical limitations. The ramp should be wide enough to be safe and maneuverable and sturdy enough to carry the weight of an electric wheelchair and it's cargo (this can approach 6-700 pounds in many instances) and have a slope that is gradual enough for a manual wheelchair user to navigate. 

     The ADA guidelines recommend a slope ratio of 1:16 to 1:20. The Americans with Disabilities Guidelines dictate how ramps are designed for all public places. A noted 1:12 ratio is too steep for some people to navigate using a manual wheelchair. This translates into an 8% slope or grade. These ratios must be followed in all public places; however, there are no rules for residential construction. On a residential basis, the ramps can be customized for the user without having to rely on the ADA averages. The ADA rules become simply guidelines. The publication assists private homeowners to create ramps that are usable, safe and sturdy. Homeowners aren't required to follow these slope guidelines but if you have the available area then less slope is always better.

Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

    Whether your family needs the support now or down the road, universal design features are a good long-term investment for the home itself. Whatever your situation please remember to rely on the experiences of a local building professional.  Check out their credentials and references and don't limit yourself to only price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor or tile installer play the part of a general contractor.  Their knowledge will be limited to that of the cabinets or tile and not much else.  More importance needs to be given to the reputable contractor's personality and knowledge and how well you two communicate.  You are making your choice for a professional to lead the way enabling your dream to be realized.  You get what you pay for with proper planning when using an experienced and qualified local contractor. T-Square Company is CAPS certified and can be reached at 512-444-0097 in Austin, Texas.  Find out how a design/build remodeling contractor can save you money during your next project.

     A wheelchair ramp is basically an inclined plane installed in addition to or instead of stairs. Ramps provide wheelchair users or users of other mobility aids as well as people pushing strollers,carts, or other wheeled objects, better access to any building. When designing a wheelchair ramp, you need to consider the users physical limitations. The ramp should be wide enough to be safe and maneuverable and sturdy enough to carry the weight of an electric wheelchair and it's cargo (this can approach 6-700 pounds in many instances) and have a slope that is gradual enough for a manual wheelchair user to navigate. Safety is a paramount concern for the user.

     The ADA guidelines recommend a slope ratio of 1:16 to 1:20. The Americans with Disabilities Guidelines dictate how ramps are designed for all public places. A noted 1:12 ratio is too steep for some people to navigate using a manual wheelchair. This translates into an 8% slope or grade. These ratios must be followed in all public places; however, there are no rules for residential construction. On a residential basis, the ramps can be customized for the user without having to rely on the ADA averages. The ADA rules become simply guidelines. The publication assists private homeowners to create ramps that are usable, safe and sturdy. Homeowners aren't required to follow these slope guidelines but if you have the available area then less slope is always better.

ADA wheelchair ramp guidelines are as follows:

• The minimum ramp width must be 36 inches minimum but 48 inches is preferable.
• Ramps must have edge protection to keep anyone from slipping off their surface in the form of a raised outer curb or railing.
• All wheelchair ramps must have level or flat unobstructed landings at the top and bottom of the rise being overcome that are 60 inches by 60 inches to provide a proper five foot wheelchair turning radius. The landing areas cannot have more than a 30 feet long ramp separating them. If the rise distance requires longer than a 30 foot run to overcome it then a series of landings can be used creating a switchback design.
• Thirty six inch handrails are required on both sides of all ramps that rise steeper than 6 inches from the ground below.
• All surfaces must be slip resistant and stable.

DETERMINING SLOPE RATIO

     To determine the slope of your ramp and how much horizontal space it will require, use the following calculation per the ADA guidelines: Multiply the inches your ramp will rise by the slope ratio you desire, and then divide the sum by 12 (to convert the horizontal space you'll need to feet). For example: 31-inch rise x 20 slope ratio = 620. That divided by 12 gives you a 51-foot horizontal projection.

     A wheelchair ramp can be permanent, semi-permanent or portable. Permanent ramps are designed to be bolted or otherwise attached in place. Semi-permanent ramps rest on top of the ground or concrete pad and are commonly used for the short term. Permanent and semi-permanent ramps are usually of aluminum, concrete or wood. Portable ramps are usually aluminum and typically fold for ease of transport. Portable ramps are primarily intended for home and building use but can also be used with vans to load an unoccupied mobility device or to load an occupied mobility device when both the device and the passenger are easy to handle. Ramps can be constructed from a variety of different materials, though some are better than others and friction is always your friend.

    Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

    Whether your family needs the support now or down the road, universal design features are a good long-term investment for the home itself. Whatever your situation please remember to rely on the experiences of a local building professional.  Check out their credentials and references and don't limit yourself to only price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor or tile installer play the part of a general contractor.  Their knowledge will be limited to that of the cabinets or tile and not much else.  More importance needs to be given to the reputable contractor's personality and knowledge and how well you two communicate.  You are making your choice for a professional to lead the way enabling your dream to be realized.  You get what you pay for with proper planning when using an experienced and qualified local contractor. T-Square Company is CAPS certified and can be reached at 512-444-0097 in Austin, Texas.  Find out how a design/build remodeling contractor can save you money during your next project.

     When mobility becomes an issue for any homeowner, regardless of age, the question arises concerning physically moving to a different home with a bath that is more accessible. Preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move. Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country.  Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of kitchen or bathroom accessibility to those very people inhabiting them.  The situation will only become ever more expanding in time. When these homes were previously purchased,  they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions.  They housed our families, our memories, and our stuff.  They represented a place where we could be ourselves.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA. 

     The ADA is the Americans With Disability Act developed in the 1990's to be sure any person with a disability will have equal access to all public facilities and spaces. Unfortunately there are no restricted codes or regulations concerning residential bathrooms or disability access baths. However, these published guidelines for ADA accessibility concerning buildings and facilities is a great resource for ideas on how to make any home safer and easier to live in while aging in place.   Homes can become more accessible through bathroom remodels to people as they age. Many of these published guidelines for wheelchair accessible remodeling, particularly requirements for corridor and door widths, safety bars and proper access to different types of facilities can go a long way in extending the amount of time an elderly or physically impaired individual can live independently. This is the primary basis for ADA remodeling.

    Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist.

      Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5'x5' clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the wall around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

      People who are interested in aging in place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.  ADA compliant kitchen cabinets and ADA bathroom cabinets will more than likely come into play to complete any accessible home remodeling project.

      Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

      The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

     When mobility becomes an issue for any homeowner, regardless of age, the question arises concerning physically moving to a different home with a bath that is more accessible. Preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move. Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country.  Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of kitchen or bathroom accessibility to those very people inhabiting them.  The situation will only become ever more expanding in time. When these homes were previously purchased,  they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions.  They housed our families, our memories, and our stuff.  They represented a place where we could be ourselves.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA. 

     The ADA is the Americans With Disability Act developed in the 1990's to be sure any person with a disability will have equal access to all public facilities and spaces. Unfortunately there are no restricted codes or regulations concerning residential bathrooms or disability access baths. However, these published guidelines for ADA accessibility concerning buildings and facilities is a great resource for ideas on how to make any home safer and easier to live in while aging in place.   Homes can become more accessible through bathroom remodels to people as they age. Many of these published guidelines for wheelchair accessible remodeling, particularly requirements for corridor and door widths, safety bars and proper access to different types of facilities can go a long way in extending the amount of time an elderly or physically impaired individual can live independently. This is the primary basis for ADA remodeling.

    Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist.

      Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5'x5' clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the wall around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

      People who are interested in aging in place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.  ADA compliant kitchen cabinets and ADA bathroom cabinets will more than likely come into play to complete any accessible home remodeling project.

      Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

      The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

     Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  If you can reach the front porch approach without obstruction then you have a great start since the stairs leading onto the front porch can be another matter all together.  A correctly designed ramp having a 1:12 slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations and physical limitations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way which starts the new accessible route within your home.  Rolling over any vertical threshold height greater than 1/2" is also difficult to maneuver.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     A traditional home builder has never truly considered the special needs of the disabled or aging within any home design. Unfortunately the design emphasis is always put on aesthetics and takes for granted everyone's mobility.  There certainly are no guarantees or clauses within any home's sales contract that will prevent our future personal life experiences from  introducing us to at least a temporary disability.  Accidents will always happen and you could find yourself having to utilize a wheelchair or walker to facilitate your independence for mobility.  Limitations in our mobility or constantly changing needs experienced by both the disabled and the elderly have sprung a new dimension in construction known as ADA remodeling to accomplish increased accessibility.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics. 

     An accessible bathroom for the user's convenience and safety becomes the first issue for anyone using a wheelchair or walker for either a short time while recovering or for the rest of their life.  The disability access bathroom will be located within the home's accessible route.  Any architectural barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom.  However, anything below three feet does not meet the 32 inch required clear width needed for clearance of a wheelchair. This work may involve framing alterations and moving light switches.  The electrical changes should be done by a licensed electrician assuring your safety.

     A completely serviceable special needs bathroom must contain at least one ADA vanity and the accessible route must be defined.   The vanity must be one with a clear underneath scald protected area having an unobstructed roll under capability for wheelchairs.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture.  A five foot turning radius allowing the wheelchair to maneuver into any approach must also be associated with the ADA vanity.  A 36x48" clear approach area to the vanity must be observed and this can overlap the five foot turning radius.  The area of travel will then be enhanced by an unobstructed clear accessible barrier free route dedicated to reaching the vanity. 

     Bathroom cabinets in Austin vary by style and usability.  There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink.  ADA sinks with a rear drain location provide for better plumbing drain hook ups.  This modification has everything to do with both the water supply lines and the waste line connecting the sink.  There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink.  These connecting pipes may become heated merely by the water passing through them creating the problem.  The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user.  The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes.  This pipe concealing panel must be installed at the correct wheelchair user clearance angle.  This allows for the needed unobstructed legroom required for the  user.  The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability.  This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance.  Clear unobstructed reach distances around the counter top area must be observed.  Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users.  If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.  Furthermore, automatic flush valves should be used on all toilets and urinals that provide for hands free use.

     Finding a contractor familiar with the guidelines of Elder construction and accessibility remodeling can be quite difficult. Be sure to check out the credentials of any potential bidders you contact.  Be sure they understand that the alterations you are seeking are for wheel chair accessible home remodeling and modifications.  Furthermore be sure this person knows and practices both the federal and most importantly your state's requirements before entering into any contract.

     Aging in place home modifications are available through T-Square Company. We are a certified aging in place (CAPS) specialist.  Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     Let's face it, accessible homes are needed by all of us at some time in our lives.  This is true whether it's for ourselves, a family member, or a guest.  The need is certainly not driven by age but is a result of life's experience.  Any family living with disability among any of the generations within it's group can always benefit from additional accessibility.   This will in turn increase safety and independence for all involved as they go through life. 

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on.

     The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  By 2019, all the 76 million baby boomers will be age 55 or older at a time when many people are planning for retirement.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  Bathrooms can be both functional and attractive when planned with elements like cabinetry that allow someone to sit at a sink.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value appealing to multiple generations, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, custom tub to shower conversions, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place is the bathroom, the kitchen, and the family area.

     Your existing bathroom may feel claustrophobic.  The solution may be to either rearrange the existing space or design a more accessible bathroom which extends beyond the existing bathroom layout.  The second way will give better access for walker or wheelchair turns and approaches to all bathroom fixtures.  You may have to give up a closet, porch, or part of another room to accomplish the best result.  Bigger is always better when mobility devices are being used.

     Curbless roll in showers are advised for everyone on a universal level and not just for the users of wheelchairs or walkers.  At the very least, observe a low profile shower base of 2" or less in height at the curb to keep people from stepping over into a walk in shower.  The wheelchair accessible or universal designed shower should contain at least a shower wand mounted on a sliding bar to be available for varying heights of use coupled with a regular height fixed shower head. A diverting valve should be used for controlling each head.  Remember you are burying the valves within the walls of the shower so choose high performance brands of fixtures when making your choices.  Folding seats and benches can make your shower more enjoyable and safe. They are also useful if caretakers are involved or temporary assistance is needed.  Secure grab bars withstanding 250 pounds of force located around the shower perimeter  will increase the safety factor and prevent falls.  Grab bars should be installed at 34-36" height above the floor.  Shower niches 48" above the floor will help prevent clutter aiding in fall prevention and safety.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. A true ADA compatible roll in shower should be 60"x60" for the total floor area when possible which will provide additional space for caretakers.  A minimum of 48"x48" is a little more cramped but is acceptable by VA guidelines.  If a tub shower conversion will be executed then the depth of the new shower should be no less than 30" clear.

     A glass enclosure will provide a revived look for your new shower.  The more expensive frameless models will bring your bathroom completely up to date.  A single splash panel or wall can be installed toward the shower head wall.  Any shower entrance should be no less than 32" in width but remember wider is better when it comes to accessibility.  Glass is available in many finishes and textures but clear is the most popular choice.

     Lighting in the shower is also very important.  An LED recessed shower can light should be installed in the shower ceiling.  Additionally, concealed colored LED lighting can be used in the shower for mood.  There can never be enough lighting when performing tasks while showering or during clean up.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     The concept of the accessible home has evolved beyond the basic grab bars and ramps to one in which accessibility is built into the basic design.  Universal design makes living in a home easier for people of all ages and abilities.  Accessible can be both beautiful and functional and never needs to have any institutional appearance.  As our aging baby boomer population ages, the need for accessibility in the home is becoming ever more important.  Our new way of viewing the basic home in our society and our antiquated architecture is giving way to a revolution in home design.  Ordinary homeowners with extraordinary challenges can partner up with CAPS design professionals, architects, and their own families to create homes to restore capabilities, independence, and grace to daily living. 

     Everyone ages differently and has different needs and wants.  The factors that constitute the aging in place market for all individuals are based on a persons genetic makeup, their lifestyle including the choices they have made while living their life, and their environment.  These factors have brought about the need for universal design.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.  Since so very few homes share the accessibility offered by universal design, to satisfy the needs of a particular household member brought about by an accident, an illness, or simply the aging process there will always be a need for customized accessibility features.  This will be accomplished by a CAPS accredited remodeling professional producing a truly functional design when considering accessible home designs in Austin, Texas.   T-Square Company is a competent home remodeling company who understands and practices aging in place home modifications and Elder construction in Austin. We are CAPS certified and will perform the work needed to fit the in house design insuring your safety and accessibility. T-Square Company specializes in accessible bathrooms in Austin, Texas.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment bring about the need for remodeling for disabilities.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination. Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness. Some of our societal statistics that weigh into aging in place situations include reports stating that 19% of the population between the ages of 16 and 64 and 42% of those of us 65 and over have a physical disability affecting the activities of their daily lives.  For a progressive condition,  aging in place home remodeling in Austin definitely comes into play.  This is the only way to insure both the safety and mobility for the homeowner or family member requiring the home modifications.  The two main groups driving this aging in place market are those people who are 65 and over and the baby boomers.  The first group is projected to reach 55 million in 2020.  The baby boomer generation born between 1946 and 1965 today make up 28% of the U.S.  population and are made up of some 77 million people.  Modifications of existing homes is important because people of age 50 and older want to remain in their current home for as long as possible.  Aging in place home modifications in Austin should only be done by a CAPS certified remodeling company.  This is the only way that you can be assured that the home modifications are the right choices to satisfy your needs.  There is no need to waste money only to find out that the wrong alterations were done by an inexperienced and unqualified remodeling company.  Always check their credentials to verify that the remodeler holds a CAPS certification. All registered CAPS program graduates and their remodeling company will be listed in a national registry in Washington.  The information can be found by simply visiting nahb.org/CAPS.

     Accessible wheelchair designs in Austin are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin your accessible second chapter in your life while remaining safe and secure in your existing home. CAPS 1636580 We are a certified contractor with the VA for our veterans.  We understand the process for securing a VA grant and conforming to the SAH program guidelines.

     When mobility becomes an issue for any homeowner, regardless of age, the question arises concerning physically moving to a different home with a bath that is more accessible. Preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move. Solving aging in place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country.  Our present day obsolete homes now inhabited by the baby boomer generation will slowly and increasingly raise their outdated and obsolete ugly heads and expose their true lack of kitchen or bathroom accessibility to those very people inhabiting them.  The situation will only become ever more expanding in time. When these homes were previously purchased,  they represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions.  They housed our families, our memories, and our stuff.  They represented a place where we could be ourselves.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA. 

     The ADA is the Americans With Disability Act developed in the 1990's to be sure any person with a disability will have equal access to all public facilities and spaces. Unfortunately there are no restricted codes or regulations concerning residential bathrooms or disability access baths. However, these published guidelines for ADA accessibility concerning buildings and facilities is a great resource for ideas on how to make any home safer and easier to live in while aging in place.   Homes can become more accessible through bathroom remodels to people as they age. Many of these published guidelines for wheelchair accessible remodeling, particularly requirements for corridor and door widths, safety bars and proper access to different types of facilities can go a long way in extending the amount of time an elderly or physically impaired individual can live independently. This is the primary basis for ADA remodeling.

    Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist.

      Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5'x5' clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the wall around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

      People who are interested in aging in place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.  ADA compliant kitchen cabinets and ADA bathroom cabinets will more than likely come into play to complete any accessible home remodeling project.

      Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

      The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.