Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  The threshold is the most dangerous component in any shower. Not only is it impossible to overcome in a wheelchair but it isn't safe for those who are vision impaired or those with mobility issues. Low threshold shower bases with add on ramps can solve the shower entry problem when the floor cannot be lowered to form a true contoured roll in slope. ADA compatible curbless roll in showers are at a minimum 5 feet wide by 3 feet deep while a 60 inch by 60 inch floor is optimum for most any situation. Using a 32-36" clear entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better. Upon exiting the shower a clear floor space having a five feet turning radius is desired. If the shower is deep enough and you can get by with merely a splash panel this will eliminate installing another architectural barrier represented by a shower door.  The roll in shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above both of which are regulated with a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a body spray head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats are useful if caretakers are involved. Sometimes it makes much more sense to have a moveable chair or bench, so you can enter and leave the shower or tub more easily. In other cases, it may be better to have a built-in option to which you can transfer. The only problem with making this choice is that you don’t absolutely know what specific issues you will have – nor the options you will prefer – in the future. Built-ins, along with enough room for removable selections, can be the way to go If you have the space. This gives you the highest number of choices possible as your needs change over time.  Most importantly, secure grab bars on wood grounds around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed shower can light fixture needs to be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. Especially if you live alone, falling in the shower or the bathroom can be physically devastating. It is also a frightening experience, and a lot of time can lapse before anyone discovers that you need help. Sometimes you can address this problem without making significant changes on your property. These include alarm systems that alert people to a fall, or arranging for someone to check on you at least once or twice a day. But not everyone who ages in place has these kinds of options.

     Remember, convenience issues are safety issues.  You must be able to move easily and safely to each part of the bathroom facilities, and you need to be able to do it conveniently enough that you are not tempted to do unsafe things. If your current bathroom is not safe, or you find that it is inconvenient, it may be time to seriously look at a remodel. 

     All new construction or any bathroom remodel should include an accessible shower with head combinations in multiple locations to fit anyone's desires.  Incorporating universal design principles into your home's custom walk in shower design can facilitate aging-in-place goals, while comfortably addressing the diverse needs of all ages and mobility levels using your home. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting and relaxing.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathroom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower that is being used specifically in homes today where the owner is planning to retire.

     Many people find themselves needing accessible homes for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs which brought on the idea of wheelchair remodeling. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

    Designing around specific physical conditions for handicap accessibility will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. Working as a team, a trained CAPS specialist along with any family caretakers or therapists is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS  or Certified Aging In Place Specialist certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your accessibility or aging in place project and what's more, keep you in your home longer.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

    Falls and slips are among the most common causes of injury to senior and elderly people requiring disability access remodeling.  Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home.  It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly.  If you are on a tight budget and can only afford a few modifications, the bathroom is the first place to begin an accessibility remodel.  The most basic improvements like adding grab bars to enhance safety issues are fairly inexpensive. 

     All new construction or any bathroom remodel should include an accessible shower with head combinations in multiple locations to fit anyone's desires.  Incorporating universal design principles into your home's custom walk in shower design or one which is wheelchair accessible can facilitate aging-in-place goals, while comfortably addressing the diverse needs of all ages and mobility levels using your home. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting and relaxing.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathroom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower that is being used specifically in homes today where the owner is planning to retire.

     Many people find themselves needing accessible homes especially in the bathroom or kitchen for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs which brought on the idea of wheelchair remodeling. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

    Curbless roll in showers are advised for everyone involved in disability access bath modifications.   The threshold is the most dangerous component for any ADA compatible shower. Not only is it impossible to overcome in a wheelchair but it isn't safe for those who are vision impaired or those with mobility issues. Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are recommended for everyone.  Special low threshold shower bases with add on ramps can solve the shower entry problem when the floor cannot be lowered to form a true contoured roll in slope. The accessible shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control valve if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns.  Folding seats are useful if caretakers are ever involved. A low profile or roll in shower base will provide wheelchair or walker access.  Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. There are currently at least 30 million Americans using wheelchairs and those numbers continue to increase as a large population of people with age related challenges look for ways to live independently in their homes. Remember, the bathroom can be one of the most dangerous places in your home because water is always involved. The bathroom can present many access challenges to people who use a wheelchair or need accommodations. Bathroom safety is one of the number one concerns in making a home accessible because more than 2/3 of emergency room visits are due to bathroom falls. 

     Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5'x5' clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The wheelchair accessible shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the wall around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

     Designing around specific physical conditions for handicap accessibility will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. Working as a team, a trained CAPS specialist along with any family caretakers or therapists is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS (Certified Aging In Place Specialist) certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your accessibility or aging in place project and what's more, keep you in your home longer.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

     The concept of the accessible home has evolved beyond the basic grab bars and ramps to one in which accessibility is built into the basic design.  Universal design makes living in a home easier for people of all ages and abilities.  Accessible home remodeling for the disabled can be both beautiful and functional and never needs to have any institutional appearance.  As our aging baby boomer population ages, the need for accessibility remodeling in the home is becoming ever more important.  Our new way of viewing the basic home in our society and our antiquated architecture is giving way to a revolution in home design.  Ordinary homeowners with extraordinary challenges can partner up with CAPS design professionals, architects, and their own families to create homes to restore capabilities, independence, and grace to daily living. Fortunately there is home accessibility help in Austin, Texas.

     Everyone ages differently and has different needs and wants.  The factors that constitute the aging in place market for all individuals are based on a persons genetic makeup, their lifestyle including the choices they have made while living their life, and their environment; however,  this industry is not age related.  These factors have brought about the need for universal design.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.  Since so very few homes share the accessibility offered by universal design, to satisfy the needs of a particular household member brought about by an accident, an illness, or simply the aging process there will always be a need for customized accessibility features.  This will be accomplished by a CAPS accredited remodeling professional producing a truly functional design when considering accessible home designs in Austin, Texas and disability access baths.   T-Square Company is a competent home remodeling company who understands and practices aging in place home modifications in Austin. They are CAPS certified and will perform the work needed to fit their in house design insuring your safety and accessibility during a handicap remodeling project. T-Square Company specializes in accessible bathrooms in Austin, Texas.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Special circumstances have brought about special needs in the home for many people both young and old.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement, manual dexterity, balance, and coordination. Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home bringing forth the need for elder construction and remodeling.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness. Some of our societal statistics that weigh into aging in place situations include reports stating that 19% of the population between the ages of 16 and 64 and 42% of those of us 65 and over have a physical disability affecting the activities of their daily lives.  For a progressive condition,  aging in place home remodeling in Austin definitely comes into play.  This is the only way to insure both the safety and mobility for the homeowner or family member requiring the home modifications.  The two main groups driving this aging in place market are those people who are 65 and over and the baby boomers.  The first group is projected to reach 55 million in 2020.  The baby boomer generation born between 1946 and 1965 today make up 28% of the U.S.  population and are made up of some 77 million people.  Modifications of existing homes is important because people of age 50 and older want to remain in their current home for as long as possible.  Aging in place home modifications in Austin should only be done by a CAPS certified remodeling company.  This is the only way that you can be assured that the home modifications are the right choices to satisfy your needs.  There is no need to waste money only to find out that the wrong alterations were done by an inexperienced and unqualified remodeling company.  Always check their credentials to verify that the remodeler holds a CAPS certification. All registered CAPS program graduates and their remodeling company will be listed in a national registry in Washington.  The information can be found by simply visiting nahb.org/CAPS.

     We are an accomplished construction company for any handicap accessible bathroom remodel.  Accessible wheelchair designs in Austin are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin your accessible second chapter in your life while remaining safe and secure in your existing home. CAPS 1636580

Disability Bathroom Remodels In Austin, Texas

    Universal design refers to broad-spectrum ideas meant to produce buildings, products and environments that are inherently accessible to older people, people without disabilities and people with disabilities. Universal Design adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. The reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design approach is appealing to all users no matter their age, size, or physical well being. Universal Design is important because our current design standards for housing do not address the design needs of more than one third of our population.  Too often the designers of homes allow the built environment to define the capabilities of the resident.  Universal Design allows for our antiquated architecture to be defined by both our changing human needs and abilities.

     There are seven criteria or principles which must be met to be considered a universal design no matter which area of the home you are referring to. Any design must be equally useful to everyone, have flexibility in it's usefulness, be simple and intuitive, be perceived by everyone, have a tolerance for error, require little physical effort, and it must maintain an adequate area for approach and use. Any complexity or discriminating attribute to a design will doom it in terms of  being considered universal in nature. However what better way can you improve on a home's total visitability by everyone? Universal Design is the design of products and environments to be usable by all people, to the greatest extent possible, without the need for adaptation or specialized design.

     Whether you refer to this revolution in housing today as accessible design, inclusive design, or universal design it is all about making a home safe, attractive, and easy to use for all of the inhabitants. It has nothing to do with the age, agility, or status of life for anyone living within the home. The main intent of this way of thinking is to be sure the inhabitants are able to enjoy their home throughout their entire lifetime utilizing the universal design principles which have been designed into their home when it was built. This way aging in place can be accomplished without the expense and hassle of having to make periodic changes to the home to meet a person's ever changing physical needs. You can plan for all stages of your life cycle with some fore thought which, once discovered, you find is just common sense. Even if you are in perfect health you can be disrupted by a minor mishap. A more serious injury can change things forever when you no longer have all your abilities.

     Universal Design principles do not equate to accessibility design even though they both are concerned with ergonomics and human function issues. The ADA guidelines for accessibility were created as a means to help those people with extreme disabilities within our society who are a narrow and specific cross section of the masses. A UD approach broadly takes into account moderate impairments or disabilities, temporary health conditions, and the varying abilities of anyone within a home regardless of their age or size. In other words, an ADA accessible home would be designed for the one person with the disability whereas a UD home is designed for everyone and should be used with any custom tub shower conversion.

     Accessibility should be a concern no matter what your age. If your concerns are not for you, barring any life changing accident, they could concern the accessibility and safety of another generation's independence. As we age, our society is beginning to realize that our homes need to accommodate future life changes. The aging in place phenomena deals with home modifications to existing homes while a universal design home would hardly ever need to address these abrupt issues even though we cannot solve all the future issues for everyone. Everyone ages differently and has their own list of specific needs.

     A sensible checklist for a home concerning Universal Design would include but is not limited to:

1. Limiting stairs while avoiding sunken rooms or multi-story floor plans with raised entrances

2. Automating lighting while controlling groups of lighting throughout the home

3. Including natural lighting through doors, windows, and skylights

4. Using multiple shower heads in the shower with rain, conventional and hand held units

5. Incorporate curbless showers into the design of your bathroom for ease of entering no matter if a wheelchair is ever involved

6. When deciding on your faucets, door handles, or cabinet pulls always pass the closed fist test for operation

7. Use nonslip flooring especially in wet areas using cork or smaller floor tiles which in turn increase the grout lines

8. Create a correct kitchen work area with the shortest distance between the stove, sink, and refrigerator as possible

9. Provide accessible lower storage in base cabinets storing the most used items on pull out shelving or in drawers

10. Lower your upper cabinets to 15" above your 34" universal cabinet top

11. Leave at least 42" between your cabinets when 48" is much better

12. Have multiple height cabinet tops to double as work surfaces for those who are seated or other little helpers in the kitchen

Universal design ideas do not strictly deal with accessibility or aging in place design and does not implement precise ADA standards but it does offer flexibility to add accessories now and later to those planning ahead or to the end user. It also provides for a wide range of human performance characteristics for the way people use spaces within their homes including well integrated usability features. These adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. That reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design build project is appealing to all users.

Aging in place home modifications are available through T-Square Company in Austin. Each universal design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin to prepare for the accessible second chapter of your life while remaining safe and secure in your existing home.

CAPS 1636580

     Universal Design does not strictly deal with accessibility and does not implement precise ADA standards but it does offer flexibility to add accessories now and later to those planning ahead or to the end user. Universal Design principles are about building and remodeling living environments that conform and adapt with the needs and abilities of the occupants throughout their lives. It also provides for a wide range of human performance characteristics for the way people use spaces within their homes including well integrated usability features. These adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. The reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design approach is appealing to all users no matter their age, size, or physical well being. Universal Design is important because our current design standards for housing do not address the design needs of more than one third of our population. Too often the designers of homes allow the built environment to define the capabilities of the resident. Universal Design allows for our antiquated architecture to be defined by both our changing human needs and abilities. Universal design refers to broad-spectrum ideas meant to produce buildings, products and environments that are inherently accessible to older people, people without disabilities and people with disabilities.

     There are seven criteria which must be met to be considered a universal design no matter which area of the home you are referring to. Any design must be equally useful to everyone, have flexibility in usefulness, be simple and intuitive, be perceived by everyone, have a tolerance for error, require little physical effort, and it must maintain an adequate area for approach and use. Any complexity or discriminating attribute to a design will doom it in terms of being considered universal in nature.

     The changing makeup of the family has led to the growth of a new architectural science: Universal Design. Simply defined, it is human-centered design that seeks to create environments and products that offer safety and comfort for all people with no need for adaptation or functional changes. The evolution toward Universal Design began in the 1950s with a new attention to design for people with disabilities. Barrier-free design was developed to remove obstacles in the built environment for people with physical disabilities.

     In this country, multi-generational households are more common today than they were even 10 years ago, due in part to the recent recession. Planning ahead for the possibility of such a reality, if you are building or remodeling, is worth a bit of time and effort. Homes that incorporate universal design principles are not only perfectly suited for the needs of an aging population, but are also appropriate for families with young children.

     While each ind­ividual will have different needs and wants, there are many ways to make homes more user-friendly or accessible. Having the ability to enter the home from the outdoors is one of the first steps to enjoying a home. Once inside, the overall layout of the home can make a significant impact on the convenience and usability of the home. Universal design principles recommend a bedroom, kitchen, entertainment area and a full bathroom on the main floor. Finding a professional with the expertise to design, build or remodel a home to be handicap accessible might seem overwhelming. One place to start is by looking through the selection of Certified Aging-In-Place Specialists. This designation program, offered through the National Association of Home Builders, incorporates components of assessment, technical knowledge and management skills related to home modifications that will allow people to stay in their own homes safely and independently for a longer amount of time.

    The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

    There are seven criteria which must be met to be considered a universal design no matter which area of the home you are referring to. Any design must be equally useful to everyone, have flexibility in it's usefulness, be simple and intuitive, be perceived by everyone, have a tolerance for error, require little physical effort, and it must maintain an adequate area for approach and use. Any complexity or discriminating attribute to a design will doom it in terms of  being considered universal in nature. However what better way can you improve on a home's total visitability? Universal Design is the design of products and environments to be usable by all people, to the greatest extent possible, without the need for adaptation or specialized design.

     Whether you refer to this revolution in housing today as accessible design, inclusive design, or universal design it is all about making a home safe, attractive, and easy to use for all of the inhabitants. It has nothing to do with the age, agility, or status of life for anyone living within the home. The main intent of this way of thinking is to be sure the inhabitants are able to enjoy their home throughout their entire lifetime utilizing the universal design principles which have been designed into their home when it was built. This way aging in place can be accomplished without the expense and hassle of having to make periodic changes to the home to meet a person's ever changing physical needs. You can plan for all stages of your life cycle with some fore thought which, once discovered, you find is just common sense. Even if you are in perfect health you can be disrupted by a minor mishap. A more serious injury can change things forever when you no longer have all your abilities.

     Universal Design principles do not equate to accessibility design even though they both are concerned with ergonomics and human function issues. The ADA guidelines for accessibility were created as a means to help those people with extreme disabilities within our society who are a narrow and specific cross section of the masses. A UD approach broadly takes into account moderate impairments or disabilities, temporary health conditions, and the varying abilities of anyone within a home regardless of their age or size. In other words, an ADA accessible home would be designed for the one person with the disability whereas a UD home is designed for everyone and should be used with any custom tub shower conversion.

     Accessibility should be a concern no matter what your age. If your concerns are not for you, barring any life changing accident, they could concern the accessibility and safety of another generation's independence. As we age, our society is beginning to realize that our homes need to accommodate future life changes. The aging in place phenomena deals with home modifications to existing homes while a universal design home would hardly ever need to address these abrupt issues even though we cannot solve all the future issues for everyone. Everyone ages differently and has their own list of specific needs.

     A sensible checklist for a home concerning Universal Design would include but is not limited to:

1. Limiting stairs while avoiding sunken rooms or multi-story floor plans with raised entrances

2. Automating lighting while controlling groups of lighting throughout the home

3. Including natural lighting through doors, windows, and skylights

4. Using multiple shower heads in the shower with rain, conventional and hand held units

5. Incorporate curbless showers into the design of your bathroom for ease of entering no matter if a wheelchair is ever involved

6. When deciding on your faucets, door handles, or cabinet pulls always pass the closed fist test for operation

7. Use nonslip flooring especially in wet areas using cork or smaller floor tiles which in turn increase the grout lines

8. Create a correct kitchen work area with the shortest distance between the stove, sink, and refrigerator as possible

9. Provide accessible lower storage in base cabinets storing the most used items on pull out shelving or in drawers

10. Lower your upper cabinets to 15" above your 34" universal cabinet top

11. Leave at least 42" between your cabinets when 48" is much better

12. Have multiple height cabinet tops to double as work surfaces for those who are seated or other little helpers in the kitchen

Universal design ideas do not strictly deal with accessibility or aging in place design and does not implement precise ADA standards but it does offer flexibility to add accessories now and later to those planning ahead or to the end user. It also provides for a wide range of human performance characteristics for the way people use spaces within their homes including well integrated usability features. These adaptations have a broad market appeal to everyone for achieving ease of use, safety, and convenience accommodating a certain reality. That reality is that all people exist along a continuum of human performance as per their personal traits and characteristics regardless of their age. A universal approach to design takes into account that everyone has varying degrees of ability and disability rather than someone is either fully-functional or disabled. A universal design build project is appealing to all users.

Aging in place home modifications are available through T-Square Company in Austin. Each universal design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin to prepare for the accessible second chapter of your life while remaining safe and secure in your existing home.

CAPS 1636580

     If you have been considering a fine bathroom makeover or remodeling project in Austin there are a few things you should take into consideration.  Bathroom makeovers in Austin, Texas can take on many looks and facets.  The scope of work you choose to accomplish this feat should effectively solve your problems and most importantly, your needs as the home owner.  The identification of these specific needs belongs to you the home owner and is extremely important.  The way your home is structurally altered to accomplish these needs is the job of the professional remodeling contractor.  Universal design and accessibility should be a concern no matter what your age.  If your concerns are not for you,  barring any life changing accident, they could concern the accessibility of another generation's independence is using the restroom.  CAPS professionals in the remodeling industry can help with solutions in solving these Aging In Place issues to increase home access.

     Just look at the different types of housing represented throughout Austin and the surrounding areas.  Smaller homes, cottages, sprawling historical town homes surrounded by architecturally pleasing fences, rustic ranch homes, "Macmansions", and sleek high rise condominiums are just a few examples of the structures that define Austin's diverse housing landscape. Economic situations along with personal preference formulates where we choose to live in a town with such diversity.  Most people remember how the old style bathtub/shower combination was a standard part of any bathroom design.  Some residential showering areas were enclosed using the multicolored vinyl shower curtain option while others had by-passing or sliding shower doors on silver tracks.  The doors were framed with either chrome or gold colored aluminum matching the sliding tracks.  Modern bathroom designs have become much more sophisticated because the many available bathroom products are easier to be discovered by the homeowner.  There are millions of pictures representing fine bathroom upgrades or bathroom remodeling all across the internet.

     Living with a dysfunctional bathroom layout reduces the total feeling of relaxation your master bath is capable of providing.   During those much deserved private moments you long for your bathroom's surroundings to provide both luxury and function.  There isn't adequate lighting for the many daily personal duties like applying makeup.   There needs to be adequate ventilation so you don't always feel as though you are housed in a "sweat box" while getting dressed. The outdated plate mirror extending from your vanity top's splash upward toward the drywall furrdown above has never been a design you thank the world of. You have always disliked that box above housing the poorly illuminating fluorescent tube lamps that are concealed by the yellowing plastic fluorescent light panel.  You are sick and tired of the poor storage facilities inherited when you purchased your home.  The height of the vanity is out of line according to your needs and it is also inadequate for your storage needs.  The existing cabinet layout contains unusable drawers beginning to come off their tracks and the cabinet doors have their own particular issues.  Your cabinets are either too deep to access what they contain or their storage capabilities have been limited by their total improper design.  What were those guys thinking?  What's more the out of fashion ceramic tiles are either partly missing or they are totally the wrong color for the day along with the colors within the rest of the room.  Having improperly working plumbing fixtures that are now also antiquated with their own set of problems is yet another quandary within itself.  The fixtures themselves can also be finished in a color that is long out of style.  So what do you do?

     If deleting the tub during a custom tub shower conversion to create a custom walk in shower design is your choice then you have a few options to consider.  Do you wall in two thirds of the width of the old tub placing the new door away from the shower head?   This new wall can be tiled in to match the shower.   Using natural stone or glass tiles will certainly be an upgrade for any Austin bathroom remodel. Do you desire a more expensive frameless door set beside a glass panel?  The enclosed shower can incorporate a couple of shampoo niches for convenience and clutter removal. The designs are limited only by your imagination and how you want the final product to turn out.  Be sure that all your research is justified and don't try to cram too much into your new bathroom remodel.  A good design is one that can come into being with the least time spent on alterations and additional costs.

     If you have the luxury of combining the tub and nearby shower areas into one large custom walk in or accessible handicap shower design your problem will be taking full advantage of the larger spatial situation.  A huge shower area is just that if it isn't efficient at using the new enlarged space. Remember that multiple heads like rain and body sprays require more water volume and this can only be accomplished by re-plumbing the water supply lines increasing their diameters from the 1/2" pipes commonly supplying baths.  Seats can also be incorporated into the design process and must be no taller than eighteen inches high.  Tiled niches recessed into the existing wall studs are a great place for shampoos and body washes.  Corner shelves are a good idea if they are out of the way.  Hooks and hangers for towels and wash cloths must be installed for efficiency and not be in the way of traffic or in a place to harm yourself once your eyes are closed fighting soap invasion.  Glass block designs can be used as a means of obtaining natural light through shower demising walls with individual installations or as a complete splash wall dividing the wet area from the rest of the bathroom.  This type of wall can be either straight or curved according to your preference.

     Redoing or enlarging your existing shower can also give you a feeling of comfort.  You can incorporate any entrance situation from walk in to roll in thresholds and you are only limited by space.  You will still have the feeling of a satisfactory bathroom remodel once everything is clean and new even if your new shower is the same size you started with.  Austin bathroom remodeling should involve multiple shower head combinations in multiple locations within the shower to fit anyone's desires. Rain heads coming out of the ceiling, body sprays coming out of the walls in many locations, or hand held units attached to the shower walls can be very practical.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you utilize your bathing environment. 

     Keep in mind that moving plumbing, especially drains, is one of the more expensive aspects of a fine bathroom makeover. It always involves floor demolition.   Changing water supply line placement for new faucet locations is not as difficult as moving drains which rely on gravity flow for function.

     Proper lighting is always an important aspect to be installed during a bathroom remodel.  It can be broken down by task.  Recessed cylindrical can lighting is used today to provide the overall luminescence for the room.  Trims with lenses can be installed above baths and showers by code to brighten darker areas.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting creating mood. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Bathroom plumbing fixture choices are numerous to say the least.  Select reputable companies offering the best warranties especially when considering finishes used on control valve trims and the fixtures installed in the project.   Larger walk in shower designs should have seamless fiberglass liners to avoid leaks if the house ever shifts.  Using natural stone or glass tiles while additionally designing in glass blocks will certainly be an upgrade.  As for the new walk in shower design, you can design the space to not need a door for splash protection or you can take the route of a clean looking frameless glass shower enclosure.   This will surely set you back at least $900.  The end result will be a sophisticated  clean look of beauty enclosing your new shower.  Whether the door sits upon a curb or you have a specific need for a curbless wheelchair accessible situation you will be satisfied with your choice.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     After choosing your residential construction contractor you should never pay for everything up front.  Payments should be associated with aspects of the job and you should always get something for your money.  Soft costs like designs, permits, or fees can be paid in advance to get the project rolling plus any custom made entities or materials ordered and stocked on the job sight.  Never let the contractor draw ahead of what is actually happening no matter how much you are caught up in the building process.  Paying for a little overhead to a legitimate construction professional will generally cost more but usually saves you a lot in the long run.  It's not always about the cheapest bid because you'll always get what you pay for. Get every aspect of the job in writing and both you and the chosen residential construction contractor must sign the document for it to be a binding contract.

  The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

    If you believe you are located at the perfect address, and you have a new member in your family or are simply a multi-generational family of today taking care of a parent and you find yourself short on living space then give us a call. Inevitably at one time or another all homeowners envision potential improvements to an existing home that can significantly enhance their living experience. Regardless of the reason you require home modifications we can help you to transform the functionality of your existing living situation or add additional living space to suit your present family's needs. Fall in love with your home again while the professional remodeling contractor's experience helps guide you through changes to your existing home which better fit your daily lifestyle.

Austin Home Remodeling Contractors/Home Additions

The Finished Product From Above Picture

Bathroom Kitchen Remodels

    It's time to find yourself either a qualified architectural firm and proceed with the endless task of interviewing residential remodeling contractor or a local design/build construction company with in house design capabilities that can build what is designed.  The latter situation is usually your best shot at getting what you basically need to solve your living situation problems allowing you to cut out the beyond budget frills.  You will also save on the soft costs of your construction project that have nothing to do with the structural building process itself.  Many local residential contractors are quite capable of pushing out a wall in your home or putting a top on a new structure.  This capability is based on both their experience and knowledge of all the building trades, especially the framing aspect that will certainly be involved.  Actual experience in this particular facet of the project could prove to be very helpful for visualizing the construction and it's possibilities.  Has this contractor ever done this kind of project before?  Does he himself have skilled experience or does he appear to be a drive by limited contractor at the mercy of his subcontractor's capabilities?  Any depth of design is totally based on experience.  You will need to completely check out the contractor's references.  Don't be taken in by paid contractor listings  and referral sights that promise you successful and competent businesses with free background checks.  They were listed there for one and only one reason, somebody paid for the listing fee.  Membership to national associations like NARI reflect only a self paid fee but says nothing about the contractor's experience and creativity.  That only comes from past customer's testimonials that you can fact check through the local BBB, Yelp, or Houzz.

    T-Square Company originally came into being as a remodeling company driven with the purpose to maximize the potential of existing homes.  When updating elements of functionality, style, efficiency, accessibility, and comfort, a home can be brought into your present day needs and desires of it's occupants. We approach complete home remodeling, renovations, and additions with the same targeted mindset using universal design techniques to build for the future. With our CAPS training, we are able to offer accessible home designs and modifications for our clients with special needs or disabilities.

    If you have contemplated and dreamed of an addition to your home for years and now find it's time to make a decision to move forward let us help you.  Certain changes in your lifestyle may have dictated an expansion.  Your living space has grown more crowded over time with additional family members being added as children, extended family members, or  an elderly family member.  Any and all of these life changing situations can add stress to your daily lifestyle creating the need for additional living space or home improvements in Austin.  As our children grow older they generally require more space and sometimes privacy.  This sparks a need for an additional bedroom space once an aging relative or spouse requiring special care is introduced into the original home's square footage. Privacy can truly become an issue if only to keep everyone happy while underneath the same roof.  Perhaps even private entrances will be required for some of the home's new residents.  These private entries could  be required to begin a new accessible route if there are ADA compatibility issues involved. 

     T-Square Company is a local design/build General Contracting firm registered with the City of Austin, Texas.  We have a competent team of in house craftsmen for your structural job aspects.  They are complemented by a force of long time affiliated subcontractors holding a masters license with the State of Texas. We are certified accessibility experts holding  nationally accredited CAPS and Universal Design (UD) certificates to assist in removing any architectural barriers limiting mobility within your home.  We offer complete home modifications for independent living for our aging in place customers in Austin.  Let us show you how to adapt your home to fit your ever changing accessibility needs.  Perhaps an expansion to a defined living space would solve a changing living situation.  How can this be accomplished without altering your home's basic footprint?  How can you go about this without a costly addition?  Maybe it's time to look under the hood, so to speak, for a solution that is right under your existing homes roof line.

    How about pushing a certain room's perimeter out into your existing unused attic space to create attic remodeling?  You can expand a small child's bedroom space to create a play or activity room.  Storage needs can be met by taking in part of the attic to create a closet or other additional storage area.  Entertainment areas can be created without taking square footage out of the living space once the equipment is installed beyond the existing inner wall line into the attic space.

    How you accomplish adding this additional square footage can be quite easy if you obtain the advice of a qualified building professional.  Any reputable residential building contractor can give you direction for such a task so that your roof's structural integrity is not put in jeopardy.  You must not under any circumstance interrupt the structural balance of your roof.  Not only could you cause a structural failure of the roof itself but other areas of your home could be affected by this interruption in stability.

   Whatever your situation please rely on the experiences of a local building professional.  Check out their credentials and references over merely price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor play the part of a general contractor because his knowledge will be limited to that of the cabinets and not much else.  You get what you pay for with proper planning.  Call T-Square Company today at 512-444-0097 for a complete design/build experience for the home remodel or addition you've longed for.

     Can you envision building a house as a young adult that you can live in comfortably while you age no matter what your basic physical needs require? This evolving home will contain wide doorways and hallways that can accommodate both a stroller and a wheelchair or walker. There will be a wide open feeling throughout the house's main living areas in the bathroom, kitchen, and living area that do not restrict moving about. There will be blocking behind the finished walls to accommodate secure grab bar installations or the towel racks in the kitchen can double as grab bars as you become unsteady from lack of balance. All the entryways from the front door to the shower entrance are smooth to prevent tripping from high thresholds. All doors and faucets will be controlled by lever hardware. This universal designed home is barrier free without looking modified and is accessible to everyone no matter of their age, size, or capability of movement. This home will be accessible to everyone from your father to your son.

     Universal design is the design of products and environments to be usable by all people, to the greatest extent possible, without the need for adaptation or specialized design. Some universal design/build ideas just make good sense. Once you bring them into your home, you'll wonder how you ever lived without them.

    Universal Design isn’t just for the elderly or the permanently disabled. As Americans age, they’re beginning to realize that their homes need to accommodate future life changes. Consumers are more cognizant today of the benefits of a universally designed home, but they may not realize it can be beautiful as well as functional. Everyone can use universal design! It doesn't matter if you are young or old. You could be short or tall, healthy or ill. You might have a disability or you may be a star athlete. Because of universal design ideas, people who are very different can all enjoy the same home. And that home will be there for all its inhabitants even when their needs change.

Seven Low-cost Universal Design Elements

• Wider hallways and door openings (recommended widths are 46 inches and 36 inches, respectively)

• Kitchen work surfaces at different heights from 30" to 34"

• Lower light switches to 48" and higher electrical outlets at 18"

• Roll-under sinks with lever faucet controls with a 27" vertical clearance

• Open knee space under counter tops and islands that are at least 30" wide

• Lever door handles instead of knobs for arthritic clients

• Blocking for grab bars around showers and bathtubs

     The aging in place phenomenon or movement is characterized by the needs and wants generated by an aging society of homeowners. People age differently because the aging process is based on their individual genetic makeup, lifestyle, and environment. These three factors combine to drive the need for Universal Design within the Aging In Place market. People's personal needs vary with age and the Universal Design of products, services, and environments provide adaptations for aging in place to everyone regardless of their age, ability, or situation. Universal Design becomes invisible when incorporated into a home remodel and is present when help with accessibility is needed. Furthermore, an appealing universal design project creates a greater resale potential. Aging in place construction provides immediate accessibility while universal design techniques provide for accessibility now and when needed in the future.

      Knowledgeable construction and design professionals are utilizing their CAPS training across the nation. CAPS stands for Certified Aging In Place Specialist. This designation is taught through the National Association of Home Builders in collaboration with AARP. CAPS connects responsible professionals with home owners who need these services on an ever-increasing basis. CAPS is a nationwide initiative and all active CAPS members can be found at nahb.org/CAPSdirectory.  Aging in place home design is a concept promoting independence and livability for all types of living environments no matter the age or level of abilities of the occupants. The principle is not entirely age related as recuperation periods from injuries or the progression of debilitating diseases like MS can happen to anyone at any age.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

      For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

     The aging in place phenomenon or movement is characterized by the needs and wants generated by an aging society of homeowners. People age differently because the aging process is based on their individual genetic makeup, lifestyle, and environment. These three factors combine to drive the need for Universal Design within the Aging In Place market. People's personal needs vary with age and the Universal Design of products, services, and environments provide adaptations for aging in place to everyone regardless of their age, ability, or situation. Universal Design becomes invisible when incorporated into a home remodel and is present when help with accessibility is needed. Furthermore, an appealing universal design project creates a greater resale potential. Aging in place construction provides immediate accessibility while universal design techniques provide for accessibility now and when needed in the future. We know that 36% of the nation's housing stock owned by people at age 50 and over was built before 1960. This group represents the most appreciated value in the housing market which may become a separate problem within itself. These homes will have to be adapted the most for the inhabitants requiring aging in place services since they preceded the idea of Universal Design and also involve more general maintenance.

     Aging in place is all about living independently for as long as possible within your existing home, neighborhood, and community. It is also about being safe and healthy within your home which has had architectural barriers or dangerous areas removed using proven practical home modifications. Trained and certified CAPS professionals are working throughout the residential remodeling industry demonstrating how you can age in place with the greatest freedom of movement and maneuverability. Aging in place home design is a concept promoting independence and livability for all types of living environments no matter the age or level of abilities of the occupants. The principle is not entirely age related as recuperation periods from injuries or the progression of debilitating diseases like MS or ALS can happen to anyone at any age.

ADA Kitchen Cabinets

     Home modifications for aging in place should include adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations for an aging in place design should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place include the bathroom, the kitchen, and the family area in order of importance. The alterations in these specific areas are essential for the accessible homes of Austin.

     People who are interested in aging in place services and aging in place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.  ADA compliant kitchen cabinets and ADA bathroom cabinets will more than likely come into play to complete any accessible home remodeling project.

ADA Bathroom Cabinets

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

      For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.