Modifying your bathroom following practiced wheelchair accessibility guidelines is a great place to start any universal remodel. This will provide access for both wheelchairs and walkers. Furthermore, you can help avoid many future injuries. Any wet area like the bath is the most dangerous of all your home's surrounding living space and is the most common area for falls and slips. Simply getting in or out of the tub or shower, using the toilet and sink, or just maneuvering over wet surfaces can be hazardous to your health. Installing properly positioned grab bars to increase safety is a great place to spend your money on a limited budget around the shower, toilet, and tub.

     Traditionally bathroom vanities were constructed so the finished cabinet top was 30” AFF above finished floor.This meant that taller people had to bend over and stand away from the sink in order to use it.This puts added stress on the lower back and legs diminishing the comfort factor.Typically bathroom vanities are 21" deep and approximately 29" tall. The depth is not a problem but most folks would prefer a universal design height of 34". Sinks shouldn't be mounted higher than 34 inches from the floor to the top of the cabinet top for an under mount or drop in model. The sinks should not exceed six inches in depth and should be installed within three inches from the front of the overhanging cabinet top edge. The ADA vanity cabinet or even a simple wall hung sink should have a knee clearance below of 27 inches high and be at a minimum 30 inches wide by 11-25 inches deep. A 9" high clear kick area (by 6" deep) at the floor should be maintained for a full height cabinet and be approximately ten inches deep according to the cabinet depth. Remember twenty four inches is the maximum reach distance while sitting in a wheelchair. The choice of sink styles depends on the personal preference of the user. Be sure the lavatory controls are easily controlled with lever or paddle handles and are capable of being operated with one hand and not requiring tight grasping, pinching, or pinching of the wrist. Knobs, discs, or ball type handles can be hard to operate by anyone with soapy hands and more so by someone having an arthritic condition or other ailments. The closer the sink valves can be toward the front of the sink the better. This can be accomplished by following the curved outline of the sink.

     Bathroom cabinets vary by style and usability. There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink. ADA sinks with a rear drain location provide for better plumbing drain hook ups. This modification has everything to do with both the water supply lines and the waste line connecting the sink. There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink. These connecting pipes may become heated merely by the water passing through them creating the problem. The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user. The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes. This pipe concealing panel must be installed at the correct wheelchair user clearance angle. This allows for the needed unobstructed legroom required for the user. The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability. This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance. Clear unobstructed reach distances around the counter top area must be observed. Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users. If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.

     To assure a clear floor space the lavatory must be installed at 24" from any side wall measuring from the center line of the sink. The distance from one sink to another if using a double lavatory layout should be at least 30" center to center. In the case of wall hung freestanding sinks the minimum distance between them should be 4" between the sink edges.  The clear floor space of 30 by 48 inches must be provided for accessing all bathroom fixtures and these areas can overlap one another. The adjoining and overlapping wheelchair turning space should be an unobstructed sixty inches in diameter. A wheelchair turning space could utilize a T-shaped space considering a sixty inch square having two 12"x24" areas removed from each corner of the square from the same side. This will be a 36" wide base with two 36" wide arms. T-shaped wheelchair turning spaces can include on one arm. In this case the clear width at the cabinet should be 36" to use the space as part of the T-turn.

     Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace. These new residential vanities do not need to look institutional even though they are wheelchair accessible. They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

     Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  If you can reach the front porch approach without obstruction then you have a great start since the stairs leading onto the front porch can be another matter all together.  A correctly designed ramp having a 1:12 slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations and physical limitations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way which starts the new accessible route within your home.  Rolling over any vertical threshold height greater than 1/2" is also difficult to maneuver.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     A traditional home builder has never truly considered the special needs of the disabled or aging within any home design. Unfortunately the design emphasis is always put on aesthetics and takes for granted everyone's mobility.  There certainly are no guarantees or clauses within any home's sales contract that will prevent our future personal life experiences from  introducing us to at least a temporary disability.  Accidents will always happen and you could find yourself having to utilize a wheelchair or walker to facilitate your independence for mobility.  Limitations in our mobility or constantly changing needs experienced by both the disabled and the elderly have sprung a new dimension in construction known as ADA remodeling to accomplish increased accessibility.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics. 

     An accessible bathroom for the user's convenience and safety becomes the first issue for anyone using a wheelchair or walker for either a short time while recovering or for the rest of their life.  The disability access bathroom will be located within the home's accessible route.  Any architectural barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom.  However, anything below three feet does not meet the 32 inch required clear width needed for clearance of a wheelchair. This work may involve framing alterations and moving light switches.  The electrical changes should be done by a licensed electrician assuring your safety.

     A completely serviceable special needs bathroom must contain at least one ADA vanity and the accessible route must be defined.   The vanity must be one with a clear underneath scald protected area having an unobstructed roll under capability for wheelchairs.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture.  A five foot turning radius allowing the wheelchair to maneuver into any approach must also be associated with the ADA vanity.  A 36x48" clear approach area to the vanity must be observed and this can overlap the five foot turning radius.  The area of travel will then be enhanced by an unobstructed clear accessible barrier free route dedicated to reaching the vanity. 

     Bathroom cabinets in Austin vary by style and usability.  There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink.  ADA sinks with a rear drain location provide for better plumbing drain hook ups.  This modification has everything to do with both the water supply lines and the waste line connecting the sink.  There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink.  These connecting pipes may become heated merely by the water passing through them creating the problem.  The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user.  The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes.  This pipe concealing panel must be installed at the correct wheelchair user clearance angle.  This allows for the needed unobstructed legroom required for the  user.  The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability.  This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance.  Clear unobstructed reach distances around the counter top area must be observed.  Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users.  If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.  Furthermore, automatic flush valves should be used on all toilets and urinals that provide for hands free use.

     Finding a contractor familiar with the guidelines of Elder construction and accessibility remodeling can be quite difficult. Be sure to check out the credentials of any potential bidders you contact.  Be sure they understand that the alterations you are seeking are for wheel chair accessible home remodeling and modifications.  Furthermore be sure this person knows and practices both the federal and most importantly your state's requirements before entering into any contract.

     Aging in place home modifications are available through T-Square Company. We are a certified aging in place (CAPS) specialist.  Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     Let's face it, accessible homes are needed by all of us at some time in our lives.  This is true whether it's for ourselves, a family member, or a guest.  The need is certainly not driven by age but is a result of life's experience.  Any family living with disability among any of the generations within it's group can always benefit from additional accessibility.   This will in turn increase safety and independence for all involved as they go through life. 

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on. Physically challenged has become the more socially accepted description of a person with an impairment.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination .  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  Austin handicap remodeling is imperative considering bathroom remodeling includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design for a handicap accessible bathroom remodel.

     Designing for specific physical conditions will lessen the impact of say arthritis, restricted mobility, or loss of vision by using a combinations of products, concepts, and techniques. A trained CAPS specialist is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your aging in place project and what's more, keep you in your home.

     The costs involved for handicap home modifications in Austin are really dictated by the amount of barrier free accessibility required by the person needing the assistance to be safe.  Comfort and safety for the home's inhabitants are key issues when designing an accessibility remodel.  Most homeowners nationally spend between $3,800 and $14,000 with a mean average expense of $7,500.  This cost again is based on the individual home modifications providing the greatest safety for those in need.

      Falls and slips are among the most common causes causes of injury to senior and elderly people requiring disability access remodeling.  Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home.  It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly.  If you are on a tight budget and can only afford a few modifications, the bathroom is the first place to begin an accessibility remodel.  The most basic improvements to enhance safety issues are fairly inexpensive. 

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

Aging in place home modifications are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS 1636580

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on.

     The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  By 2019, all the 76 million baby boomers will be age 55 or older at a time when many people are planning for retirement.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  Bathrooms can be both functional and attractive when planned with elements like cabinetry that allow someone to sit at a sink.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value appealing to multiple generations, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, custom tub to shower conversions, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place is the bathroom, the kitchen, and the family area.

     Your existing bathroom may feel claustrophobic.  The solution may be to either rearrange the existing space or design a more accessible bathroom which extends beyond the existing bathroom layout.  The second way will give better access for walker or wheelchair turns and approaches to all bathroom fixtures.  You may have to give up a closet, porch, or part of another room to accomplish the best result.  Bigger is always better when mobility devices are being used.

     Curbless roll in showers are advised for everyone on a universal level and not just for the users of wheelchairs or walkers.  At the very least, observe a low profile shower base of 2" or less in height at the curb to keep people from stepping over into a walk in shower.  The wheelchair accessible or universal designed shower should contain at least a shower wand mounted on a sliding bar to be available for varying heights of use coupled with a regular height fixed shower head. A diverting valve should be used for controlling each head.  Remember you are burying the valves within the walls of the shower so choose high performance brands of fixtures when making your choices.  Folding seats and benches can make your shower more enjoyable and safe. They are also useful if caretakers are involved or temporary assistance is needed.  Secure grab bars withstanding 250 pounds of force located around the shower perimeter  will increase the safety factor and prevent falls.  Grab bars should be installed at 34-36" height above the floor.  Shower niches 48" above the floor will help prevent clutter aiding in fall prevention and safety.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. A true ADA compatible roll in shower should be 60"x60" for the total floor area when possible which will provide additional space for caretakers.  A minimum of 48"x48" is a little more cramped but is acceptable by VA guidelines.  If a tub shower conversion will be executed then the depth of the new shower should be no less than 30" clear.

     A glass enclosure will provide a revived look for your new shower.  The more expensive frameless models will bring your bathroom completely up to date.  A single splash panel or wall can be installed toward the shower head wall.  Any shower entrance should be no less than 32" in width but remember wider is better when it comes to accessibility.  Glass is available in many finishes and textures but clear is the most popular choice.

     Lighting in the shower is also very important.  An LED recessed shower can light should be installed in the shower ceiling.  Additionally, concealed colored LED lighting can be used in the shower for mood.  There can never be enough lighting when performing tasks while showering or during clean up.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

    Falls and slips are among the most common causes of injury to senior and elderly people requiring disability access remodeling.  Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home.  It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly.  If you are on a tight budget and can only afford a few modifications, the bathroom is the first place to begin an accessibility remodel.  The most basic improvements like adding grab bars to enhance safety issues are fairly inexpensive. 

     All new construction or any bathroom remodel should include an accessible shower with head combinations in multiple locations to fit anyone's desires.  Incorporating universal design principles into your home's custom walk in shower design or one which is wheelchair accessible can facilitate aging-in-place goals, while comfortably addressing the diverse needs of all ages and mobility levels using your home. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting and relaxing.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathroom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower that is being used specifically in homes today where the owner is planning to retire.

     Many people find themselves needing accessible homes especially in the bathroom or kitchen for themselves or family members. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs which brought on the idea of wheelchair remodeling. Home modifications can increase safety, accessibility, and independence for people who want to live independently.

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

    Curbless roll in showers are advised for everyone involved in disability access bath modifications.   The threshold is the most dangerous component for any ADA compatible shower. Not only is it impossible to overcome in a wheelchair but it isn't safe for those who are vision impaired or those with mobility issues. Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are recommended for everyone.  Special low threshold shower bases with add on ramps can solve the shower entry problem when the floor cannot be lowered to form a true contoured roll in slope. The accessible shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control valve if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns.  Folding seats are useful if caretakers are ever involved. A low profile or roll in shower base will provide wheelchair or walker access.  Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. There are currently at least 30 million Americans using wheelchairs and those numbers continue to increase as a large population of people with age related challenges look for ways to live independently in their homes. Remember, the bathroom can be one of the most dangerous places in your home because water is always involved. The bathroom can present many access challenges to people who use a wheelchair or need accommodations. Bathroom safety is one of the number one concerns in making a home accessible because more than 2/3 of emergency room visits are due to bathroom falls. 

     Roll in showers without curbs are advised for everyone on a universal level for an accessible bath.  A 5'x5' clear floor space is an optimum size when a caretaker is involved. Using a 32-36"  wide barrier free entrance in a shower partition with an out-swinging door is advised for everyone.  Remember wider is better in all respects. Upon exiting the shower a clear floor space of 30"x48" for approach to the shower should be present and this area intersects with a five feet turning radius within the room. The wheelchair accessible shower should contain a shower wand on a sliding bar mounted at 48" above the floor to be available for varying heights of use accompanied by a regular height fixed shower head above.  These diverse shower heads are both regulated using a diverting controller valve.  Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well. Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Fold down seats attached to the shower wall are useful if caretakers are involved. Recessed shampoo niches are helpful to eliminate clutter on the shower floor.  Secure grab bars installed on wood grounds buried within the wall around the entire shower perimeter at 34-36" above the finished shower floor increases the safety factor and helps to prevent falls.  A recessed can light fixture should be installed above the shower area for proper lighting. All of the bathroom floor surface must be nonskid type to prevent slipping on a guaranteed wet floor. The ultimate goal in accessible design is to make the bathroom space safe for everyone who uses the bathroom. Universal design can better accommodate wheelchair users and can make the bathroom more comfortable for all users and many times can be done without sacrificing style. It is important to carefully plan the building or remodeling for a wheelchair accessible bathroom by taking inventory of the users capabilities and preferences.

     Designing around specific physical conditions for handicap accessibility will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. Working as a team, a trained CAPS specialist along with any family caretakers or therapists is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS (Certified Aging In Place Specialist) certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your accessibility or aging in place project and what's more, keep you in your home longer.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on.

     The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nation wide and has been for several years as a sign of the times.  By 2019, all the 76 million baby boomers will be age 55 or older at a time when many people are planning for retirement.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics.  Bathrooms can be both functional and attractive when planned with elements like cabinetry that allow someone to sit at a sink.  In fact, there are many benefits to using universal design techniques, including potential use by aging family members, added resale value appealing to multiple generations, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple universal design updates for aging in place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, custom tub to shower conversions, adding a seat within the roll in shower, lowering upper cabinets and counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  Many considerations should be taken into account to provide safety and independence.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home as recommended by the ADA.  The three areas needing improvement for a person wanting to age in place is the bathroom, the kitchen, and the family area.

     Curbless roll in showers are advised for everyone on a universal level and not just for the users of wheelchairs or walkers.  At the very least, observe a low profile shower base of 2" or less in height at the curb to keep people from stepping over into a walk in shower.  The wheelchair accessible or universal designed shower should contain at least a shower wand mounted on a sliding bar to be available for varying heights of use coupled with a regular height fixed shower head. A diverting valve should be used for controlling each head.  Remember you are burying the valves within the walls of the shower so choose high performance brands of fixtures when making your choices.  Folding seats and benches can make your shower more enjoyable and safe. They are also useful if caretakers are involved or temporary assistance is needed.  Secure grab bars withstanding 250 pounds of force located around the shower perimeter  will increase the safety factor and prevent falls.  Grab bars should be installed at 34-36" height above the floor.  Shower niches 48" above the floor will help prevent clutter  aiding in fall prevention and safety.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. A true ADA compatible shower should be 60"x60" for the total floor area when possible which will provide additional space for caretakers.  A minimum of 48"x48" is a little more cramped but is acceptable by VA guidelines.  If a tub shower conversion will be executed then the depth of the new shower should be no less than 30" clear.

     A glass enclosure will provide a revived look for your new shower.  The more expensive frameless models will bring your bathroom completely up to date.  A single splash panel or wall can be installed toward the shower head wall.  Any shower entrance should be no less than 32" in width but remember wider is better when it comes to accessibility.  Glass is available in many finishes and textures but clear is the most popular choice.

     Lighting in the shower is also very important.  An LED recessed shower can light should be installed in the shower ceiling.  Additionally, concealed colored LED lighting can be used in the shower for mood.  There can never be enough lighting when performing tasks while showering or during clean up.  Light strips or single wall fixtures can be designed around the new framed beveled mirror that you have chosen.  The choice of bulbs utilized is yours for now at least.  Try using dimmers to control your new lighting. 

     Ventilation is so important when planning a bathroom upgrade because of the humidity involved.  Too many times a single exhaust fan is installed above the toilet, or what is much worse, in the center of the room.   Heat and humidity naturally rise and will overtake the entire room if given a chance. Today's quiet bathroom exhaust fans should be sized according to the room's air volume.  They should be located above any bathing or showering facility and above the toilet.  Conditioned air along with adequately sized duct work supplied by your central unit will further accentuate a pleasant feeling within the bath.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professional builders normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical experiences covering a worker's accident while on your property.

     I tell my customers all the time that one of their main ways of choosing a reputable contractor with a good track record and BBB experience rating is the ability for them to do work with the particular residential building contractor they are interviewing.  Can they communicate easily relying on the contractor's experience and reputation and can they get along throughout the sometimes long and detailed construction process?  Are they compatible as human beings because the only energy that should be spent during the project should be directed toward it's completion.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

    The concept of the accessible home has evolved beyond the basic grab bars and ramps to one in which accessibility is built into the basic design.  Universal design makes living in a home easier for people of all ages and abilities.  Accessible can be both beautiful and functional and never needs to have any institutional appearance.  As our aging baby boomer population ages, the need for accessibility in the home is becoming ever more important.  Our new way of viewing the basic home in our society and our antiquated architecture is giving way to a revolution in home design.  Ordinary homeowners with extraordinary challenges can partner up with CAPS design professionals, architects, and their own families to create homes to restore capabilities, independence, and grace to daily living.  Bathroom accessibility remodels with roll in showers in Austin, Texas are possible with the right people involved.  

Most residential housing is geared toward young healthy adults. Builders do not take into account age-related conditions such as reduced mobility or limited range of reach. Hence, dwellings do not support the physical and sensory changes that older adults encounter as they age. What appear to be insignificant home features can have significant effect: for a person with even minor aging issues.

     Human problems must be solved using correct designs when remodeling which have been customized to match the abilities of the occupant.  People who have become seriously injured, people living with a debilitating disease, people with sensory limitations or intellectual limitations, and last but not least the people who are planning to stay in their homes for as long as possible all need accessible homes.  The need for dealing with disabilities empowers us all to ensure that we create environments wherein people can function effectively.  Quite often it is the home that presents the greatest difficulties through limited mobility or other physical impairments to seniors as they age in their existing living surroundings. Designing for specific physical conditions will lessen the impact of say arthritis, restricted mobility, or loss of vision by using combinations of products, concepts, and techniques available today. These aging in place changes can actually increase the value of your home as you are able to appeal to multiple generations of home buyers. In some cases, those who are doing only consultations are not the ones actually implementing those suggestions or doing the home modifications, which is left up to contractors. However, a CAPS certified remodeler or contractor providing a one stop shop is even more valuable to anyone wanting to age in place. Their construction knowledge enables any aging in place design to come to fruition via practicality and best practices. Complete aging in place services and the knowledge of how to carry them out are available to the homeowner through CAPS certified remodeling.  On the other hand, any knowledgeable advice from a CAPS certified individual is still valuable.  It’s up to these consultants to make sure they charge for their assessment and advise for modifying the home.  They will be additionally compensated for their design and once again for a detailed drawing. CAPS professionals are generally paid by the hour or receive a flat fee per visit or project. Typically an assessment takes approximately 60-90 minutes. It’s best if you or a family member can accompany the professional during the home safety assessment, as you or they can ask questions about specific safety items as they come up. A comprehensive Home Safety Assessment can pay for itself by avoiding the high cost of injury or assisted living.

     But you say to yourself that  your needed aging in place home modifications basically require general home remodeling in Austin, Texas or in any other town for that matter.  That is true but a specialized handicap remodeling contractor holding a national CAPS certificate is who you need as a partner to insure that  the accessibility issues of your home are solved correctly.  With over 30 years of remodeling experience I obtained my registered CAPS certificate.  By offering a design/build firm to my aging in place customers, I get personal satisfaction from giving my clients their independence back while the remain in their existing home.  Without the training required to earn the CAPS certificate on top of my decades of building knowledge I could not offer my customers such a thorough and complete solution for solving their accessibility issues.  Only an experienced qualified remodeler holding a CAPS certificate has the qualifications to design an accessible route and perform the construction required to make it safe and functional for the AIP customer.  Accessible bathrooms with custom walk in showers and kitchens are available using the right education and experience.  There is nothing more rewarding than seeing a person with mobility impairments be able to independently roll into his or her shower in their disability access bath and witness that accomplishment.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings. The goal of an accessible bathroom design in Austin is to make the bathroom a safe space for everyone who uses the facilities. Aging in place services use universal design to accommodate wheelchair use and can make the bathroom more comfortable for all generations with or without specific needs. It is important to carefully outline the scope of work during the remodeling of an accessible bathroom by first taking inventory of the users capabilities, needs, and preferences.  All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in place design must be carried out by an aging in place specialist who is also a reputable residential remodeling professional.

    Mobility limitations vary dramatically but, depending on the personality of the individual, any diminished capacity creates feelings of dependence or depression. When considering an accessible home remodeling project, anticipate that any conditions you are experiencing will only progress for the worst with age. Simple changes to help with hand grip strength or coordination within the home can include large rocker type wall switches, touch controlled lamp switches, and converting round door knobs to lever sets. Mobility aids like walkers, canes, and wheelchairs need to be available at any time. People utilizing these mobility aids may use them all but at different times during the day or hopefully not at all. Accessible home remodeling must take this into account and be designed to accommodate them all as needed by the user.

      Interior modifications can include adding grab bars or handrails throughout the home, lowering upper cabinets and counter tops to universal design heights, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors to a clear 32" width.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home like a disability access bath.

      Modifying your bathroom for ADA compliance following practiced wheelchair accessibility guidelines is a great place to start any universal remodel during a handicap accessible bathroom remodel.  This will provide access to both wheelchairs and walkers.  Furthermore,  you can help avoid many future injuries.  Any wet area like the bath is the most dangerous of all your home's surrounding living space and is the most common area for falls and slips.  Simply getting in or out of the tub or shower, using the toilet and sink, or just maneuvering over wet surfaces can be hazardous to your health.  Installing properly positioned grab bars to increase safety is a great place to spend your money on a limited budget around the shower, toilet,  and tub. A walk in bath tub containing a water tight door can provide an easy alternative for people with mobility issues who cannot navigate over bathtub walls.  The main complaint for these very expensive tubs is that the user must sit there soaking wet and getting cold for a couple of minutes while the tub drains before they can open the door.  Another alternative to consider is a walk in shower design which has the option of having a door.  The shower door is not needed if the shower is designed properly protecting the adjacent bath floor areas from becoming drenched and hazardous.  Any door is just another barrier to negotiate along a designated route for a person with mobility issues.  If a wheelchair is needed for mobility,  a roll in or transfer shower should be of consideration.  A roll in shower is perfect for the person who wants to have a shower but doesn't have the strength to stand in the shower.  On the other hand, a transfer shower enables a wheelchair user to move from the wheelchair or walker onto a sturdily mounted seat contained within the shower area.  Again this will be determined by the shower user's mobility limitations.  A curbless or non-threshold shower entrance is a superior design for gaining access to the walk in shower but it must be correctly designed for drainage.  A curbless shower does not mean a shower door cannot be incorporated into the design.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

Handicap Accessible Bathroom Shower

     The concept of the accessible home has evolved beyond the basic grab bars and ramps to one in which accessibility is built into the basic design.  Universal design makes living in a home easier for people of all ages and abilities.  Accessible home remodeling for the disabled can be both beautiful and functional and never needs to have any institutional appearance.  As our aging baby boomer population ages, the need for accessibility remodeling in the home is becoming ever more important.  Our new way of viewing the basic home in our society and our antiquated architecture is giving way to a revolution in home design.  Ordinary homeowners with extraordinary challenges can partner up with CAPS design professionals, architects, and their own families to create homes to restore capabilities, independence, and grace to daily living. Fortunately there is home accessibility help in Austin, Texas.

     Everyone ages differently and has different needs and wants.  The factors that constitute the aging in place market for all individuals are based on a persons genetic makeup, their lifestyle including the choices they have made while living their life, and their environment; however,  this industry is not age related.  These factors have brought about the need for universal design.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.  Since so very few homes share the accessibility offered by universal design, to satisfy the needs of a particular household member brought about by an accident, an illness, or simply the aging process there will always be a need for customized accessibility features.  This will be accomplished by a CAPS accredited remodeling professional producing a truly functional design when considering accessible home designs in Austin, Texas and disability access baths.   T-Square Company is a competent home remodeling company who understands and practices aging in place home modifications in Austin. They are CAPS certified and will perform the work needed to fit their in house design insuring your safety and accessibility during a handicap remodeling project. T-Square Company specializes in accessible bathrooms in Austin, Texas.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Special circumstances have brought about special needs in the home for many people both young and old.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement, manual dexterity, balance, and coordination. Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home bringing forth the need for elder construction and remodeling.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness. Some of our societal statistics that weigh into aging in place situations include reports stating that 19% of the population between the ages of 16 and 64 and 42% of those of us 65 and over have a physical disability affecting the activities of their daily lives.  For a progressive condition,  aging in place home remodeling in Austin definitely comes into play.  This is the only way to insure both the safety and mobility for the homeowner or family member requiring the home modifications.  The two main groups driving this aging in place market are those people who are 65 and over and the baby boomers.  The first group is projected to reach 55 million in 2020.  The baby boomer generation born between 1946 and 1965 today make up 28% of the U.S.  population and are made up of some 77 million people.  Modifications of existing homes is important because people of age 50 and older want to remain in their current home for as long as possible.  Aging in place home modifications in Austin should only be done by a CAPS certified remodeling company.  This is the only way that you can be assured that the home modifications are the right choices to satisfy your needs.  There is no need to waste money only to find out that the wrong alterations were done by an inexperienced and unqualified remodeling company.  Always check their credentials to verify that the remodeler holds a CAPS certification. All registered CAPS program graduates and their remodeling company will be listed in a national registry in Washington.  The information can be found by simply visiting nahb.org/CAPS.

     We are an accomplished construction company for any handicap accessible bathroom remodel.  Accessible wheelchair designs in Austin are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin your accessible second chapter in your life while remaining safe and secure in your existing home. CAPS 1636580

Disability Bathroom Remodels In Austin, Texas

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness and so on. Physically challenged has become the more socially accepted description of a person with an impairment.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination .  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  Austin handicap remodeling is imperative considering bathroom remodeling includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design for a handicap accessible bathroom remodel.

     Designing for specific physical conditions will lessen the impact of say arthritis, restricted mobility, or loss of vision by using a combinations of products, concepts, and techniques. A trained CAPS specialist is able to identify the day to day problems weighing on those with health limitations. If you are considering an aging in place remodel for your home don't just contact any local remodeler in your area and expect a satisfactory accessible home modification.  A professional design/build accessibility project can only be created for your specific needs by a qualified home remodeler having a nationally accepted CAPS certification.  This credential is backed by the NAHB.  Only a CAPS  home remodeler possesses the specific knowledge that will insure a successful outcome for your aging in place project and what's more, keep you in your home.

     The costs involved for handicap home modifications in Austin are really dictated by the amount of barrier free accessibility required by the person needing the assistance to be safe.  Comfort and safety for the home's inhabitants are key issues when designing an accessibility remodel.  Most homeowners nationally spend between $3,800 and $14,000 with a mean average expense of $7,500.  This cost again is based on the individual home modifications providing the greatest safety for those in need.

      Falls and slips are among the most common causes causes of injury to senior and elderly people requiring disability access remodeling.  Smooth surfaces in combination with wet areas make the bathroom one of the most dangerous areas within the home.  It is of paramount importance that the bathroom be updated providing safety for any person with limited mobility or the elderly.  If you are on a tight budget and can only afford a few modifications, the bathroom is the first place to begin an accessibility remodel.  The most basic improvements to enhance safety issues are fairly inexpensive. 

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

Aging in place home modifications are available through T-Square Company. Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS 1636580