Aging in place construction and accessible home remodeling has become synonymous with handicap accessible home design and modification during our lifetime.  If you have been paying attention to the medical news concerning our society you are well aware we are living longer than just a few decades ago.  As a result, our senior populations are expanding and most people will experience health issues that are most common among the elderly.  Most seniors will reach a point in their lives when they require specialized home environments to safely retain their independence.  Home modifications can be used to accommodate anyone from people with mobility impairments to those with vision loss, hearing loss, or even cognitive or developmental disabilities.  Accessibility home modifications or wheelchair accessible bathroom remodeling in Austin will allow anyone with limited mobility within your home to feel more empowered and independent.  The extent of a customized accessibility design is dependent upon the activity level of the person needing the modifications.

     Interior modifications can include adding grab bars or handrails throughout the home, lowering upper cabinets and counter tops to universal design heights, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors to a clear 32" width.  You might also consider lowering light switches and thermostats and installing easier to use door knobs.  You should try to provide a clear barrier free path or accessible route to the most visited areas of your home like a disability access bath.

     Modifying your bathroom for ADA compliance following practiced wheelchair accessibility guidelines is a great place to start any universal remodel.  This will provide access to both wheelchairs and walkers.  Furthermore,  you can help avoid many future injuries.  Any wet area like the bath is the most dangerous of all your home's surrounding living space and is the most common area for falls and slips.  Simply getting in or out of the tub or shower, using the toilet and sink, or just maneuvering over wet surfaces can be hazardous to your health.  Installing properly positioned grab bars to increase safety is a great place to spend your money on a limited budget around the shower, toilet,  and tub. 

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

     A walk in bath tub containing a water tight door can provide an easy alternative for people with mobility issues who cannot navigate over bathtub walls.  The main complaint for these very expensive tubs is that the user must sit there soaking wet and getting cold for a couple of minutes while the tub drains before they can open the door.  Another alternative to consider is a walk in shower design which has the option of having a door.  The shower door is not needed if the shower is designed properly protecting the adjacent bath floor areas from becoming drenched and hazardous.  Any door is just another barrier to negotiate along a designated route for a person with mobility issues.  If a wheelchair is needed for mobility,  a roll in or transfer shower should be of consideration.  A roll in shower is perfect for the person who wants to have a shower but doesn't have the strength to stand in the shower.  On the other hand, a transfer shower enables a wheelchair user to move from the wheelchair or walker onto a sturdily mounted seat contained within the shower area.  Again this will be determined by the shower user's mobility limitations.  A curbless or non-threshold shower entrance is a superior design for gaining access to the walk in shower but it must be correctly designed for drainage.  A curbless shower does not mean a shower door cannot be incorporated into the design.

     A wall mounted sink can add accessibility to a bathroom by adding additional free space underneath the sink.  This allows access with either a wheelchair or bench.  Installing a single handle or hands free faucet can ease the burden of those with dexterity issues.  Since a wheelchair bound person might bring their legs or the lower part of their body in contact with the plumbing below the sink, it is very important to insulate all the plumbing pipes to protect the user from scalds while the sink is in use.

     Standing and seating is taken for granted by most everyone but for those with strength, balance, and mobility issues it can be a difficult task.  This is why the toilet has to be a great consideration when designing an accessible, secure, and safe environment.  Not only will it help prevent injury but the optimal accessibility design will help preserve an individual's dignity by extending their ability to function independently.  Toilets should be of the correct comfort height and be equipped with the proper seat that allows for easy sitting and standing.  Toilet seat lights can very helpful while they provide light at night or in darker rooms to help with depth perception and also light the toilet area to prevent trips and falls.

     If you hire an experienced building remodeling contractor with infinite knowledge of accessibility home modifications they will be able to help you make the right ADA remodeling choices.  These will include the improvements offering the most service to the individual with mobility issues. Talk to your contractor about the disability and the activity level of the person needing the modifications.  Together you can arrive at a custom solution for your accessible home design.

A Wheelchair Accessible Bathroom

    Aging in place home modifications are available through T-Square Company in the Austin area. We have an A plus rating with the local BBB and have over 30 years of remodeling experience. We are additionally a certified aging in place specialist offering complete aging in place services.  Each design/build situation will be customized to fit your personal needs increasing your accessibility. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

    Life happens and your present way of going about it includes newly discovered physical barriers which were never an issue before.  You've lost your mobility and are now forced to rely on a wheelchair for assistance at least for the present time.  The maneuvering of familiar areas within your home you'd always taken for granted are now presenting barriers that are limiting your new means of mobility.  Clear openings of 32" or greater, elevation changes steeper than 1:12, and being able to have access to all your home's facilities have been affected springing forth handicap remodeling.  The removal of these home grown barriers that now disrupt your accessible route for handicap bathrooms in Austin, Texas needs to be done by a qualified building professional holding a CAPS certificate.  Any ADA remodeling should comply with both ADA and local building code standards along with the TDLR guidelines.

     Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  Given that you can reach the front porch approach without obstruction is a great start.  The stairs leading onto the front porch are yet another matter all together.  A correctly designed ramp having the correct slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way that starts the new accessible route within your home.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     An accessible bathroom for your convenience becomes the first issue.  The disability access bathroom will be located within the accessible route.  Any barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom and must be widened during a bathroom transformation.  Anything below three feet does not meet the clear 32 inch requirement mentioned above and will need to be altered for clearance of your wheelchair. This work may involve moving light switches.  These alterations should be done by a licensed electrician assuring your safety.

     Once inside the accessible bathroom you should try to maintain a five foot turning radius for your wheelchair if at all possible. You will need to have your plumbing facilities brought into compliance to enable your freedom and safety.  Bathroom modifications for the disabled involve the use of grab bars within the tub or shower and around the toilet which can be very helpful insuring your safety for maneuverability.  These should be installed at 34 inches above the finished floor to safeguard your use of them.  Having roll under capability for the new 34" high ADA compliant vanity can be very helpful while you are in the wheelchair.  Exact clearances should be complied with underneath the vanity.  The proper safety equipment should be installed on the plumbing pipes that don't allow scalding of your legs. The toilet may need to be replaced providing a comfort level height for easier access.  The handicap bath or roll in shower may need to be altered to become only a shower with roll in or possibly transfer capabilities. Roll in showers are always easier to deal with than handicap baths having walk in ability. However, these tubs are not for everyone especially those with dementia so do your homework before buying such an expensive addition to your bathroom.   All of these changes must be done along the  ADA guidelines for your safety.

The Top Five Items To Include When Considering An Accessible Bathroom Design

1. Vanity Sink Accessibility

Wheelchair Accessible bathrooms today contain stylish ADA vanities set at a universal height of 34 inches with clear knee spaces.  Plan on 27 inches of vertical clearance for a wheelchair. The sink faucets must be easily controlled by either wrist handles or levers. The faucets can be fitted on the side of the sink to make them easier to reach. Or install infra-red faucets that detect motion. Hang the mirror low enough for a seated person to see themselves, and tip the top of the mirror out. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Scalding must be guarded against by using either insulating pipe wrap or a removable panel for the plumbing.

2. Toilet Accessibility

Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Grab bars should be installed on at least both sides of the toilet. Ideally, the toilet should be positioned between two support bars 36 inches apart. A toilet seat 17 inches off the floor is a more comfortable height for everyone. Creating a toilet within an open area and not a closet is much more accessible. Elevated or special toilet seats are available with a heat feature and some have the ability to self close or have a night light. A more expensive bidet/toilet is available but an add on bidet attachment to a regular toilet can be handy.

3. Bathing Facilities

Curbless roll in showers that are 5 feet wide and 3 feet deep having a 36" clear entrance are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Installing fixtures with a scald guard or lowering the temperature at the water heater is a must to prevent burns. Folding seats in the shower are useful if caretakers are ever involved and they are much safer than a free standing shower seat which can fall over. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered. Walk in tubs are also a consideration but some people get chilled while the tub is draining. Install the slider bar for the hand held shower hose and head 4 feet off the floor so that the head can slide up to 6 feet high. Always use a shower valve that is thermostatically controlled and pressure-balanced to prevent scalds. If you desire a full body wash, you can include a regular shower head as well.

4. Safety and Accessibility

Always choose fixtures and fittings that are easy to control with a single hand motion or a closed fist. Motion controlled sensor fixtures are also a possibility when specifying finishes. Provide easily accessible storage compartments with pull out shelving eliminating architectural barriers by not using doors on the cabinetry. Always consider the individual needs of the occupant and find the best placement of any reachable items within their reach distance of 24". Fully consider where the best access is for all accessories such as robe hooks, towel bars, paper dispensers, soap dishes, toothbrush holders, shower shelves. The distances and clearances required will be dictated by the user and not by an accepted general outline. With falls in the wet area of the bathroom being such a great concern, a non slip tile floor should be installed without placing loose rugs in the general area. All doors should have levers instead of door knobs. The Americans with Disabilities Act requires a 5-foot turning radius for a wheelchair. But if space is tight, remodelers may be able to make do with less. "(The 5-foor turning radius) may not always be needed, especially with an electric chair, which will easily turn in a tighter space.

5. Lighting

Natural lighting is always better for anyone using the bath. Adequate task lighting in the shower, dressing area, and vanity vicinity should be installed. Lowered switches at around 48" above the floor in reaching distance should control all the lighting. You can install switches with a push button or large toggle that doesn't require a pinching motion to turn on and off. Outlets that are ground protected should be installed at 18" above the floor.

     The referenced door situation above will be true for any room in the house if you are to enter them barrier free.  The kitchen, your bedroom, and any other rooms you require accessibility to enter could be affected.  Even the closet door within your bedroom will need to be wide enough so that you can manage getting your clothes to dress.  Any other bedrooms that you may need to enter with your wheelchair will need alterations.

     The accessible kitchen is another story altogether.  You will at least need the roll under capability as mentioned above at the sink.  Upper kitchen cabinet heights may become an issue if you still plan to do meal preparations.  No matter what you end up doing, make sure to hire an experienced building professional who understand the ADA guidelines for your well being.

     Aging in place home modifications are available through T-Square Company in the Austin area. We have an A plus rating with the local BBB and have over 30 years of remodeling experience. We are additionally a certified aging in place specialist offering complete aging in place services.  Each design/build situation will be customized to fit your personal needs increasing your accessibility. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     According to the Joint Center for Housing Studies (JCHS) at Harvard University, the nation's housing inventory is in no shape to accommodate the 70% increase in the number of Americans aged 50 and over that will occur between 2000 and 2030.  Over the next two decades, more than 27.7 million people will join the 50 and over age group.  Most of this increase will be among the population aged 65 and over which is projected to surge 65% by 2030.

     Universal design and aging in place design and services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Just what are the most important design issues regarding aging in place home modifications in Austin?

     To begin with, the JCHS data showed that one of the top priorities with aging in place consumers is low maintenance.  They want their houses to look great and require as little maintenance as possible.  There is a minimal need for landscaping and outdoor upkeep, exteriors that require periodic painting, and a preference for newer houses rather than older ones where things don't break down as easily.  These are the main reasons why the aging population considers moving.  However, the kitchen and bath in existing homes are the two main areas most referenced when considering CAPS certified remodeling improvements.

     People who are interested in aging in place home improvements  and elder living solutions are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.  There are many aging in place remodeling considerations.

     Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suit and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

     Kitchens have evolved because fewer cabinets are needed within the more open designs.  Fewer wall cabinets are needed because of personal reach limitations. For those that are used, they can be installed at 14" above the base cabinet work top instead of the standard 18" spacing.  The cabinet top is now lowered by two inches and installed at a universal 34" height.  This makes a net 6 inch lower installation height for the bottom of the wall cabinet.  All types of cabinet inserts like pull out shelves and specialized drawers are now available for installation in both base and wall cabinets.  These devices will certainly help solve the reach problem.  Base cabinet kick spaces can be raised to 9" and deepened instead of the standard 4" to accommodate wheelchair access.  Knee spaces can be incorporated into the design for roll under access at the sink, prep area, and cooktop.

     The lack of bending motion and decreasing reach distances is changing the way we purchase and install appliances at comfortable heights. Placing dishwashers higher by a few inches to limit bending has become a reachable fad and the new height is changing the old look of our kitchens.   Refrigerator drawers, dish washing drawers, and double ovens that are no longer stacked are just a few changes within the present day appliance marketplace.  Cooking ranges with the controls located on the front represents another metamorphosis helping with reach problems.  Microwaves can be installed on the now lowered counter top or within the lowered base cabinet according to the consumers need for adequate reach.

     The lack of doors represents a change in the cabinet market.  The new open look lets homeowners access what is stored within the cabinet without an open door blocking their clear path for approach.  No matter in what manner the doors are hung they always interfere with accessibility.  The open cabinet look is seen in both the bath and kitchen.

     Accessible bathrooms today contain stylish vanities set at a universal height of 34 inches with clear knee spaces.  The sink faucets are easily controlled by either wrist handles or levers.  Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Toilet seats are available with a heat feature and some have the ability to self close or have a night light.  Curbless roll in showers are advised for everyone.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Folding seats are useful if caretakers are ever involved. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

    Many of us will face at least a temporary disability during our lifetime requiring some alterations to our living space.  Those changes which will greatly aid in maneuvering through our daily routines.  The temporary or permanent use of mobility devices signifies a lifestyle change in anyone's future often as a result of an accident.  This situation can make getting around safely in our home much more difficult when planning for elder construction.  The often used daily paths in our lives will be disrupted and complicated if you find yourself using a wheelchair or walker as a permanent means of mobility. 

     Keeping ourselves independent requires planning during handicap remodeling projects providing accessible routes throughout the home.  Sometimes just entering the home can be a problem if you find yourself in a wheelchair pondering on how to negotiate the steps leading to your front door. Traditional home builders have never considered the issues affecting mobility for the disabled or elderly.

     ADA remodeling and universal design ideas begin at the front door using ramps to get around the stair issue mentioned above.  The front door may need to have locking hardware complying with special needs.  Once inside the home, an accessible design and designated route will let you reach the kitchen or bath without restrictions.  The adjusted clearances between walls within a hallway will be wide enough (42" or more) for a smooth passage.  Widening the entrances to all rooms to 32" or greater means you can now maneuver throughout the home. By using the correct lever door hardware you will no longer impede mobility creating frustration while moving about.  Having an unobstructed turning radius of five feet within each room is also very important for wheelchair maneuvering, especially in the bathroom.

     What really defines the accessible homes of Austin?  Barrier free architectural design and accessibility for all who enter the structure while approaching the main living areas of the home in question is a fair definition. Universal design and aging in place trends have taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the ever growing demand.  It is ultimately up to the individual homeowners and their families to plan for future housing needs. Once it is discovered that modifications to an existing home are not possible to accomplish total accessibility then it is time to consider a newer or custom built accessible home.  What are the main design issues regarding aging in place home modifications in Austin?

1. Low maintenance with little need for landscaping or exterior upkeep which could translate into newer rather than older homes that are the accessible homes of Austin.
2. An accessible level entry either achieved with ramps or the rare flat lot in Austin.  Consumers are looking for the free maneuverability that more open floor plans offer having greater clear unobstructed floor space.  Wider doorways and unobstructed accessible routes are truly a concern.  These structures will provide flat floors without transitions requiring steps or stairs to move around.
3. An accessible master suite and kitchen located on the same floor is preferable.  If two story homes are mandated by the community then the guests will inhabit the second floor.  If the master suite needs to be located on the second floor then closets can be stacked to house a future elevator installation.
4. Evolving kitchens have sprung up due to the more open floor plans.  Fewer wall cabinets, lowered cabinet tops, pullout shelves or specialized drawers, and a reduced number of mobility obstructing doors represent the evolution of today's cabinetry. Knee spaces can be incorporated into a kitchen design for roll under access to the sink, prep area, and cook top.  Higher toe kicks can facilitate greater wheelchair access.
5. Appliances are being installed at more comfortable heights due to decreased reach distances and bending motion.  Raised dishwashers, refrigerator drawers,  dish washing drawers, and non-stacked double ovens are just a few changes within the appliance world.  Microwaves can be installed below the cabinet top and cook tops with controls located on the front represent another appliance metamorphosis helping with reach problems.
6. The lack of cabinet doors creating a new accessible open look for cabinetry is taking hold on the market.  This is becoming more popular in both the bath and kitchen of accessible homes.
7. Bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Comfort height toilets covered with any one of a multitude of available seats to fit every need prevent deep knee bends required for seating. Curbless roll in showers are advised for everyone on a universal level.  The shower should contain at least a shower wand on a sliding bar to be available for varying heights of use along with a regular height shower head with diverter control if desired.  Folding seats are useful if caretakers are involved and secure grab bars around the shower perimeter will increase the safety factor and prevent falls.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. 

     Finding a contractor familiar with the guidelines of accessibility can be quite difficult. Be sure to check out the credentials of any potential bidders you contact.  Be sure they understand that the alterations you are seeking are for wheel chair accessible home remodeling and modifications.  Furthermore be sure this person knows and practices both the federal and most importantly your state's requirements before entering into any contract.

     Let's face it, accessible homes are needed by all of us at some time in our lives.  This is true whether it's for ourselves, a family member, or a guest.  The need is certainly not driven by age but is a result of life's experience.  Any family living with disability among any of the generations within it's group can always benefit from additional accessibility.  This will in turn increase safety and independence for all involved as they go through life. 

     Aging in place home modifications are available through T-Square Company. We are a certified aging in place specialist registered with the VA for our veterans.  Each design/build situation will be customized to fit your personal needs increasing your accessibility. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     Everyone ages differently and has different needs and wants.  The factors that constitute the aging in place market and senior home modifications for all individuals are based on a persons genetic makeup, their lifestyle including the choices they have made while living their life, and their environment.  These factors have brought about the need for universal design.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.  Since so very few homes share the accessibility offered by universal design, to satisfy the needs of a particular household member brought about by an accident, an illness, or simply the aging process there will always be a need for customized accessibility features.  This will be accomplished by a CAPS accredited remodeling professional producing a truly functional design.   This same competent home remodeling company who understands and practices aging in place home modifications in Austin should carry out the work to fit the design and insure your safety and accessibility.

     Physical limitations affect many more people than the daily users of walkers and wheelchairs.  Many members of our life experienced or elder society have significant problems in dealing with their home environment.  Today's conventional building standards conflict with most people's accessibility when you consider our created architectural barriers concerning cabinetry and door opening widths, individual strength, range of motion, movement,  manual dexterity, balance, and coordination .  Once the demands of our built environment exceed their capacities we become excluded from a room or even the entire home.  The building world must work in unison to be sure the entire living environment meets basic needs in addition to affordability and structural integrity for the consumer and home owner.  This includes both the home and the components within the home being accessible to all inhabitants.  Privacy, sense of belonging, sense of control, and the sense of safety and security make up the quality of life for any home and should be considered for any design.

     There are really three categories of aging in place customers.  Those who are simply and wisely planning ahead for their futures to remain in their present homes.  The second category concerns those people who know they have a chronic medical disorder and need to prepare in advance for accessibility issues which will come as a result of their disease.  People with diseases that are constantly causing increased physical or mental changes to their being are a good representative of this second group.  The third group involves those people who either have had a chronic problem that has  progressed severely altering their mobility or those who have sustained a life altering tragedy such as being involved in an accident.  All of these groups will drive the future metamorphosis of existing inaccessible dwellings.

     Disability is a complex phenomenon representing an interaction between one's physical impairments, the activities they need to perform, and the architectural barriers within the space in which this situation occurs.  The terminology and jargon used for disabilities evolves regularly whereas, "handicapped" is no longer acceptable.  It is no longer merely a description of intellectual or physical impairments.  Each individual with similar impairments describes his or her limitations differently.  The blind don't experience their world the same as a person with deafness.  Some of our societal statistics that weigh into aging in place situations include reports stating that 19% of the population between the ages of 16 and 64 and 42% of those of us 65 and over have a physical disability affecting the activities of their daily lives.  For a progressive condition,  aging in place home remodeling in Austin definitely comes into play.  This is the only way to insure both the safety and mobility for the homeowner or family member requiring the home modifications.  The two main groups driving this aging in place market are those people who are 65 and over and the baby boomers.  The first group is projected to reach 55 million in 2020.  The baby boomer generation born between 1946 and 1965 today make up 28% of the U.S.  population and are made up of some 77 million people.  Modifications of existing homes is important because people of age 50 and older want to remain in their current home for as long as possible.  Aging in place home modifications in Austin should only be done by a CAPS certified remodeling company.  This is the only way that you can be assured that the home modifications are the right choices to satisfy your needs.  There is no need to waste money only to find out that the wrong alterations were done by an inexperienced and unqualified remodeling company.  Always check their credentials to verify that the remodeler holds a CAPS certification. All registered CAPS program graduates and their remodeling company will be listed in a national registry in Washington.  The information can be found by simply visiting nahb.org/CAPS.

     If you have been considering an aging in place design for a fine bathroom makeover or remodeling project in Austin there are a few things you should take into consideration.  Accessible home remodels and bathroom upgrades in Austin, Texas can take on many looks and facets.  The scope of work you choose to accomplish should effectively solve your problems and most importantly, your needs as the home owner.  The identification of these specific needs belongs to you the home owner.  The way your home is structurally altered to accomplish these needs is the job of the professional remodeling contractor.  Accessibility should be a concern no matter what your age.  If your concerns are not for you,  barring any life changing accident, they could concern the accessibility of another generation's independence is using the restroom.  Aging in place services performed by CAPS professionals in the remodeling industry can help with solutions in solving these issues.

     Whether you desire a roll in shower, accessible sink , or merely a clear and unobstructed access to your existing bath, a CAPS professional can help you increase your accessibility.  The CAPS certification holder can not only help you with the design of what you desire but is competent and professionally qualified to carry out any construction needed. Certainly there are many upgrades available when planning an accessible bathroom transformation.  The replacement of the tub with a new walk in shower can create a bold  look but will run you around $10,000 while a roll in shower will run around $14,000.  There are no spending limits for bathroom remodels.  You can plan on spending around $12,000 to $15,000 for a hall bath remodel.  The price tag can approach or exceed $35,000 for a complete master bath remodel.  The type of fixtures and building components chosen along with the labor will compose the overall cost of the remodeling project. These prices are based on long lasting home modifications requiring time to install using proper construction techniques and are not to be confused with pop in kits offered by others they claim will be accomplished in a couple of days.

     Who do you choose to help you with your dream?  It is true that a professional remodeling contractor with years of experience will cost you more than a handyman illegally playing among the trades at your peril but then again there are those professional guarantees to  consider.  The professional verses the handyman is more likely to seek your overall satisfaction that will follow him into his next job.  A true building professional can also orchestrate the job's smooth flow limiting the down time of a most useful room.  Subcontractors will not be covered up and each skilled  trade is brought onto the sight as needed in an orderly fashion.  Professionals normally have insurance to cover on the job accidents to protect the homeowners from having legal action brought against them personally.  Be sure you ask for a certificate of insurance from your chosen professional contractor so that you aren't held personally liable for medical expenses covering a worker's accident while on your property.  Don't forget that only a certified aging in place (CAPS) professional can help you solve your accessibility issues.used specifically in homes today where the owner is planning to retire.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

A Custom Roll In Shower Conversion in Austin, Texas

   T-Square Company has been successfully remodeling kitchens and bathrooms in Austin for over 30 years.  So just what is involved with kitchen upgrades and bathroom remodeling in Austin, Texas while Austin homeowners are constantly looking for ways to bring their existing older home's kitchens and bathrooms up to date?  Bathroom remodels for any smaller baths can incorporate a number of  items to fit any budget.  Larger kitchens and bathrooms lend themselves to more extravagant designs.  Using beautiful stone or ceramic tiles in an interesting design, installing new plumbing fixtures, upgrading the cabinet tops and the use of neutral colors can create a kitchen or bathroom with a "wow" factor. It is quite possible to produce a small but charmingly remodeled kitchen or bath on a budget.  A project that is affordable plus the fact that it will add resale value to your home cannot be denied.  Check out all the options before committing to a plan and then stick to it.  The replacement of for instance the tub with a new walk in shower can create a bold  look but will run you around $10,000 in the bath.  An Austin kitchen remodel for two hundred square feet will begin at around $50,000.  There are no spending limits for bathroom upgrades.   You can plan on spending around $12,000 to $15,000 for a hall bath remodel.   The price tag can approach or exceed $35,000 for a complete master suite remodel.  The type of fixtures and building components chosen along with the labor will compose the overall cost of the remodeling project. Always hire a local and professional builder.  Remember that producing change orders because "no one thought of that" become expensive. Create the style for your Austin kitchen or bathroom remodel that best gives you a feeling of pride!

   Accessible bathrooms  incorporating aging in place design today contain stylish vanities set at a universal height of 34 inches with clear knee spaces.  The sink faucets are easily controlled by either wrist handles or levers.  Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Toilet seats are available with a heat feature and some have the ability to self close or have a night light.  Curbless roll in showers are advised for everyone undergoing a bathroom accessibility remodel.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Folding seats are useful if caretakers are ever involved. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered.  We specialize in Elder construction and increased accessibility.

    If you have been considering a fine bathroom makeover or bathroom transformation in Austin there are a few things you should take into consideration.  Bathroom upgrades in Austin, Texas can take on many looks and facets.  The scope of work you choose to accomplish this task should effectively solve your problems and most importantly, your needs as the home owner-- for now and for the future.  The identification of these specific needs belongs to you the home owner.  The way your home is structurally altered to accomplish these needs is the job of the professional remodeling contractor.  Aging in place and accessibility should be a concern no matter what your age.  If your concerns are not for you,  barring any life changing accident, they could concern the accessibility of another generation's independence is using the bathroom.  A CAPS professional in the remodeling industry can help with solutions in solving these issues while performing design/build home modifications.  T-Square Company is a nationally registered CAPS remodeling contractor.

    When you are replacing your old cabinets during a kitchen remodel with some new fine cabinetry or perhaps you are just needing an updated work surface there are a few choices that need to be considered before making your final decision.  Plastic laminates, solid surface material, granite, quartz, stainless steel, wood, and concrete are the most popular choices today when considering new or replacement counter tops for a fine kitchen upgrade.  Each surface has it's own set of pros and cons to take under advisement before a conclusion is reached making sure your selection blends with your lifestyle.  Remember that any samples of materials you see are only small representations of any larger piece when choosing products.  Furthermore trivets and cutting boards should always be used no matter which top you choose.  Kitchen remodeling in Austin, Texas is no different than anywhere else in the country. Kitchen upgrades and bathroom remodels return the most money at resale on the initial investment of the remodeling project.  National averages show that kitchen remodels recoup around 70% of the costs of the upgrade at the time of resale.  However, your kitchen remodeling costs should never exceed 15% of the total value of your home.  Here is where you need to get your thinking cap on and plan for an affordable budget that is within your means.  Your material choices are very important and if you need to stay mid-level to fit the budget then do so.  The labor involved for the project will be around 1.6 times the cost of the materials used.  The total budget should allow $100 per square foot for your kitchen upgrade project. 

    Finding help to remodel a home can be time consuming and should be undertaken only by those builders possessing a wide array of remodeling experience.  All builders certainly are not remodeling contractors.   The finale of new construction is by far more foreseen because of the known and predictable  path the work schedule will follow.  During remodeling, first there is the demolition work and the costs involved to dismantle a certain existing area in your home prior to beginning the construction of a new project. Knowing the best way to accomplish this aspect is why you need to hire a remodeling contractor.  This type of building professional will base his results on his capability of blending any new work done within the home with the existing design and elevations.  The expenses of this new construction represent the second set of costs involved for any residential remodeling project.

     Along with Aging in Place, Universal Design is becoming more of a household term when it comes to a kitchen or bathroom remodel. Essentially, it’s about building or modifying places and spaces—both public and private—to accommodate people of all ages and abilities. More than just an architectural concept, universal design is a win-win for sandwich generation boomers caring for aging parents and their children at home, for grandparents raising grandchildren and great-grandchildren, and for all who are facing the challenges of caring for a loved one with Alzheimer’s or other chronic diseases.

     Whether your family needs the support now or down the road, universal design features are a good long-term investment for the home itself.

    Whatever your situation please remember to rely on the experiences of a local building professional.  Check out their credentials and references and don't limit yourself to only price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor or tile installer play the part of a general contractor.  Their knowledge will be limited to that of the cabinets or tile and not much else.  More importance needs to be given to the reputable contractor's personality and knowledge and how well you two communicate.  You are making your choice for a professional to lead the way enabling your dream to be realized.  You get what you pay for with proper planning when using an experienced and qualified local contractor. T-Square Company can be reached at 512-444-0097 in Austin, Texas.  Find out how a design/build remodeling contractor can save you money during your next project.

 A New Walk In Shower During A Bathroom Remodel

This New Island Replaced A Box Canyon Peninsula Adding Storage and Traffic Flow

   T-Square Company has been successfully remodeling kitchens and bathrooms in Austin for over 30 years.  So just what is involved with kitchen upgrades and bathroom remodeling in Austin, Texas while Austin homeowners are constantly looking for ways to bring their existing older home's kitchens and bathrooms up to date?  Bathroom remodels for any smaller baths can incorporate a number of  items to fit any budget.  Larger kitchens and bathrooms lend themselves to more extravagant designs.  Using beautiful stone or ceramic tiles in an interesting design, installing new plumbing fixtures, upgrading the cabinet tops and the use of neutral colors can create a kitchen or bathroom with a "wow" factor. It is quite possible to produce a small but charmingly remodeled kitchen or bath on a budget.  A project that is affordable plus the fact that it will add resale value to your home cannot be denied.  Check out all the options before committing to a plan and then stick to it.  The replacement of for instance the tub with a new walk in shower can create a bold  look but will run you around $10,000 in the bath.  An Austin kitchen remodel for two hundred square feet will begin at around $50,000.  There are no spending limits for bathroom upgrades.   You can plan on spending around $12,000 to $15,000 for a hall bath remodel.   The price tag can approach or exceed $35,000 for a complete master suite remodel.  The type of fixtures and building components chosen along with the labor will compose the overall cost of the remodeling project. Always hire a local and professional builder.  Remember that producing change orders because "no one thought of that" become expensive. Create the style for your Austin kitchen or bathroom remodel that best gives you a feeling of pride!

   Accessible bathrooms  incorporating aging in place design today contain stylish vanities set at a universal height of 34 inches with clear knee spaces.  The sink faucets are easily controlled by either wrist handles or levers.  Toilets are available in comfort heights eliminating the deep knee bend needed for seating.  Toilet seats are available with a heat feature and some have the ability to self close or have a night light.  Curbless roll in showers are advised for everyone undergoing a bathroom accessibility remodel.  The shower should contain at least a shower wand on a sliding bar for varying heights of use along with a regular shower head and control if desired.  Folding seats are useful if caretakers are ever involved. Grab bars around the bath and especially in the shower should be used while non slip floor covering should always be considered.

    If you have been considering a fine bathroom makeover or bathroom transformation in Austin there are a few things you should take into consideration.  Bathroom upgrades in Austin, Texas can take on many looks and facets.  The scope of work you choose to accomplish this task should effectively solve your problems and most importantly, your needs as the home owner-- for now and for the future.  The identification of these specific needs belongs to you the home owner.  The way your home is structurally altered to accomplish these needs is the job of the professional remodeling contractor.  Aging in place and accessibility should be a concern no matter what your age.  If your concerns are not for you,  barring any life changing accident, they could concern the accessibility of another generation's independence is using the bathroom.  A CAPS professional in the remodeling industry can help with solutions in solving these issues while performing design/build home modifications.  T-Square Company is a nationally registered CAPS remodeling contractor.

    When you are replacing your old cabinets during a kitchen remodel with some new fine cabinetry or perhaps you are just needing an updated work surface there are a few choices that need to be considered before making your final decision.  Plastic laminates, solid surface material, granite, quartz, stainless steel, wood, and concrete are the most popular choices today when considering new or replacement counter tops for a fine kitchen upgrade.  Each surface has it's own set of pros and cons to take under advisement before a conclusion is reached making sure your selection blends with your lifestyle.  Remember that any samples of materials you see are only small representations of any larger piece when choosing products.  Furthermore trivets and cutting boards should always be used no matter which top you choose.  Kitchen remodeling in Austin, Texas is no different than anywhere else in the country. Kitchen upgrades and bathroom remodels return the most money at resale on the initial investment of the remodeling project.  National averages show that kitchen remodels recoup around 70% of the costs of the upgrade at the time of resale.  However, your kitchen remodeling costs should never exceed 15% of the total value of your home.  Here is where you need to get your thinking cap on and plan for an affordable budget that is within your means.  Your material choices are very important and if you need to stay mid-level to fit the budget then do so.  The labor involved for the project will be around 1.6 times the cost of the materials used.  The total budget should allow $100 per square foot for your kitchen upgrade project. 

    Finding help to remodel a home can be time consuming and should be undertaken only by those builders possessing a wide array of remodeling experience.  All builders certainly are not remodeling contractors.   The finale of new construction is by far more foreseen because of the known and predictable  path the work schedule will follow.  During remodeling, first there is the demolition work and the costs involved to dismantle a certain existing area in your home prior to beginning the construction of a new project. Knowing the best way to accomplish this aspect is why you need to hire a remodeling contractor.  This type of building professional will base his results on his capability of blending any new work done within the home with the existing design and elevations.  The expenses of this new construction represent the second set of costs involved for any residential remodeling project.

     Along with Aging in Place, Universal Design is becoming more of a household term when it comes to a kitchen or bathroom remodel. Essentially, it’s about building or modifying places and spaces—both public and private—to accommodate people of all ages and abilities. More than just an architectural concept, universal design is a win-win for sandwich generation boomers caring for aging parents and their children at home, for grandparents raising grandchildren and great-grandchildren, and for all who are facing the challenges of caring for a loved one with Alzheimer’s or other chronic diseases.

     Whether your family needs the support now or down the road, universal design features are a good long-term investment for the home itself.

    Whatever your situation please remember to rely on the experiences of a local building professional.  Check out their credentials and references and don't limit yourself to only price checks against other bidders.  Don't make the mistake of letting a cabinet making subcontractor or tile installer play the part of a general contractor.  Their knowledge will be limited to that of the cabinets or tile and not much else.  More importance needs to be given to the reputable contractor's personality and knowledge and how well you two communicate.  You are making your choice for a professional to lead the way enabling your dream to be realized.  You get what you pay for with proper planning when using an experienced and qualified local contractor. T-Square Company can be reached at 512-444-0097 in Austin, Texas.  Find out how a design/build remodeling contractor can save you money during your next project.

 A New Walk In Shower During A Bathroom Remodel

This New Island Replaced A Box Canyon Peninsula Adding Storage and Traffic Flow