You've spent your time looking through the internet examples of bathroom remodeling.  You've gazed at all the remodeling books offered at the local grocery and lumber box stores. Now you've come to the conclusion thatnone of them immediately suits your current situation.  The pictures you studied of fine bathroom makeovers are composed of lavish bathrooms with huge footprints way beyond the scope of your modestly sized room needing a fine bathroom upgrade. 

     Bathroom sizes are usually dictated in some respect by the length of the tub which in most cases is five to six feet long.  This is evidenced by a tub that has been installed opposite the entry wall producing a wall to wall tub situation.  In this configuration the toilet and vanity are generally placed on one of the walls that are perpendicular to the length of the tub. Here is a great starting point to gain space for a larger custom walk in shower to replace the tub you never use.  But if you are fortunate to have both wall lengths exceed the five or six feet norm then space is not an issue and you can proceed with ease.  Just choose your finishes wisely and keep all choices within your budget.

     If you're current situation is cramped but you already have a double vanity, you might gain space for a new shower expansion by either shortening the vanity while keeping the two sinks or by going with one single sink located in the middle of a shorter vanity.  This can be accomplished by capping off one sink drain completely and/or deleting the water supply stops.  If your toilet is located between the vanity and tub then shortening the vanity is all for naught.  You can move the toilet over but this means breaking out the floor to change the toilet plumbing floor flange plus the water supply.  Be careful as this alteration can be costly and should only be done to allow certain specific situations to evolve.  

     Moving on to either the tub removal bringing about a walk in shower design or the tub's replacement highlighted with a custom shower surround,  you'll have to decide what will be of the most use to you.  A tub surround limits your creativity but you can still enjoy a couple of shampoo nooks installed between your existing studs before any tiling takes place.  Replacing the old tub/shower valve and tub spout will also give you a shiny feeling of newness.  A new glass enclosure will provide a revived look plus the more expensive frameless models will bring your bathroom completely up to date.

     If deleting the tub to achieve a custom walk in shower design is your choice then you have a few options to consider.  Do you wall in two thirds of the width of the old tub placing the new door away from the shower head?   This new wall can be tiled in to match the shower and can also have glass blocks inserted into it for natural light to prevent claustrophobia.  Do you desire a full length curb to accommodate a taller ready made glass enclosure or even the more expensive frameless model set beside a glass panel?  The designs are limited only by your imagination and how you want the final product to turn out.  Be sure that all your research is justified and don't try to cram too much into your new bathroom remodel.  A good design is one that can come into being with the least time spent on alterations and additional costs.

     If you're uncertain about how to proceed during Austin bath transformations always rely on a local and trusted building professional.  Sometimes spending a little money for experienced help with design and construction techniques can save you a lot during the construction process.

A Tub to Shower Conversion with Seat Derived From a Shorter Vanity with Glass Block Inserts

Accessible Bathrooms In Austin

     Universal design and aging in place services in Austin have finally taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Our existing architecture does not lend itself well to accomplishing any easy aging in place home remodels in Austin.  In fact, there are more inaccessible homes in all of the US than there are accessible homes and 45% of these existing homes are owned by the baby boomers representing the oldest group of homeowners.  Generally speaking in most residential US properties there are no easy ways to enter into bathrooms or utilize  kitchens without coming into contact with one architectural  barrier or another-especially if a wheelchair or walker is being used to help with mobility issues.  Everything requires the proper clearance and distance for a new customized accessible route in your home to function properly.  Please consider this aspect in your design if an elderly parent will be coming to visit or you yourself suffer an unfortunate accident or develop a debilitating disease.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.  Call us at 512-444-0097 to see how we can help you design your bath for the future.

     Remodeling your existing master bath to obtain an often dreamed of larger shower doesn't always mean adding square footage to your existing bathroom.  Whether your doing a tub to shower conversion, utilizing the existing uncomfortable tub and shower spaces together, or merely enlarging your existing shower you can reach a more comfortable feeling by changing your existing layout and utilizing your existing bathroom's square footage.  Fine bathroom upgrades usually involve an efficiency of space usage plus getting rid of any unused or abused space like inefficient closets or wasted storage areas.  This situation can be addressed in the  design of your future fine cabinetry.

     A tub to shower conversion for a custom walk in shower can provide easier access helping with mobility issues.   There's no stepping over the side of the tub.  The custom walk in shower in Austin, Texas access can be made into a raised threshold type used in a wheelchair roll in situation that solves accessible ADA issues or it can involve a small 4-6 inch step over a newly formed curb.  Either way the access is located at the greatest distance from the wet wall and within the wall that is perpendicular to the wet wall.  A hand held shower that is clip mounted on an adjustable vertical rod will be sufficient for almost all situations.  A seat may be able to be installed within the perpendicular wall nearest the wet wall if at least a twelve inch offset is available.

     If you have the luxury of combining the tub and nearby shower areas into one large custom walk in shower design your problem will be taking full advantage of the larger spatial situation.  A huge shower area is just that if it isn't efficient at using the new enlarged space. Remember that multiple heads like rain and body sprays require more water volume and this can only be accomplished by replumbing the water supply lines increasing their diameters from the 1/2" pipes commonly supplying baths.  Seats can also be incorporated into the design process and must be no taller than eighteen inches high.  Tiled niches recessed into the existing wall studs are a great place for shampoos and body washes.  Corner shelves are a good idea if they are out of the way.  Hooks and hangers for towels and wash cloths must be installed for efficiency and not be in the way of traffic or in a place to harm yourself once your eyes are closed fighting soap invasion.  Glass block designs can be used as a means of obtaining natural light through shower demising walls with individual installations or as a complete splash wall dividing the wet area from the rest of the bathroom.  This type of wall can be either straight or curved according to your preference.

     Redoing or enlarging your existing shower can also give you a feeling of comfort.  You can incorporate any entance situation from walk in to roll in thresholds and you are only limited by space.  You will still have the feeling of a satisfactory bathroom remodel once everything is clean and new even if your new shower is the same size you started with.

     Shower pans are a concern with fiberglass being superior to that of vinyl fabric.  Fiberglass pans usually never fail and must be used in all second story bathroom upgrades.  The fiberglass normally will stay together even if the house settles or the floors buckle.  Any type of metal pan is obsolete and will almost always fail at the corners. 

     A reputable cement impregnated tile backer board is preferable to any green or moisture resistant drywall products.  Lighting issues should be addressed if the use of a solid shower demising wall makes it too dark within the new shower.  This situation can be solved by installing a covered shower can light within the ceiling immediately above the bathing area.  One other concern is humidity and this can be solved by installing a large enough vented outside ceiling exhaust fan just outside and above the shower entrance within the ceiling.  Using glass enclosures is a choice with any design and installing an additional wet trap floor drain within the bathroom just beyond the shower entrance is always an option.

    Whether you have replaced your old cabinets with a set of new fine cabinetry or just need an updated work surface atop your existing setup there are a few choices that need to be considered before choosing a new countertop for your fine cabinetry and making your final decision.  Plastic laminates, solid surface material, granite, quartz, and concrete are the most popular choices today when considering new or replacement countertops for a fine kitchen upgrade.  Each surface has it's own set of pros and cons to take under advisement before a conclusion is reached so that it blends with your lifestyle.  Remember that any samples of materials that you see are only small representations of any larger piece when choosing products.  Furthermore hotpads and cutting boards should always be used no matter which top you choose.

     Nonporous plastic laminates have been around for many years which is a testament to their durability.  We've come a long way since the days of harvest gold and avocado green but some of this original material still exists in kitchens today.  We now have different grades of laminate and the HD grade offers interesting designs and textures that help to hide scratches.  Heat should never be introduced and the use of hot pads is a necessity.  Seams are also a consideration when choosing laminates because they are still visible even when using today's matching seam fill products.  Color caulks offered by the laminate manufactures matching their laminate colors are used where the top meets the splash for flexibility.  Drop in sinks are preferable when using plastic laminate but now there are some undermount units available. There are also many edge profiles produced today to enhance the look of your new laminate surface.  Never use abrasive cleaners on any plastic laminate surfaces because they dull the existing finish.

     Solid surface materials like Corian are also composed of nonporous plastic where the color is continuous throughout it's thickness.  This material will stain and scratch but due to their makeup the solid surface tops can be reworked by professionally buffing the the affected areas.  Remember that the darker the product the more evident the scratches.  These tops do appear seamless and are more bacteriostatic than stone.  The pricing varies for groups A-E with the solid color A group being the least expensive.  The higher priced groups give you many more color choices and variations.  A matte finish with a low sheen verses the higher glossed finishes found on granite is typical.  There are no limits for the edge profiles and different colors can also be used as an accent. (see photo below)

     Granite is a natural stone coming right out of the mountain so no two slabs are exactly alike.  Many natural colors are available and usually lighter tops are preferred over darker stained cabinetry.  The stones are cut and polished to a high gloss finish but this can be altered to produce a more dull surface by a process known as honing.  There are different edge treatments available limited only by the fabricator.  Seams are visible and accepted and only avoided by using  larger pieces to limit the number of joints.  One downfall of granite is it's porosity.  Granite tops require maintenance and must be sealed frequently.  The duration between coats is directly proportional to the amount of use your top gets.  A good rule of thumb is to see if water still beads up when you place on the surface.  If not, reseal.

     Quartz is a man made product consisting of 93% stone pieces held together by resin and dyes.  It is the newest material available today having bacteriostatic qualities and it is technically maintenance free due to it's nonporous surface.  In its beginning this product contained small pieces of stone but now larger pieces are being used to create more interesting patterns.  The overall look is a more uniform pattern than that of granite.  It is the most scratch resistant choice out there but things do happen.  The joints are not seen.  Like granite there are no limits to the sinks that can be used.

     Concrete tops are poured in a mold outlining the face and edge profile.  The varying colors of the substrate are accomplished by adjusting the variables within the mix like cement colors, the type of sand(s), or by the add mixes used during the mixing process.  Many factors can produce shade, hue, and tone contrasts like acid etching stains used on the  surface once it has been poured and set.  More creative and interesting contrasts can be achieved by using additives in the mix like stainless steel filings, glow in the dark materials, or colored glass chips.  Once the slab is polished it must be sealed at the rate needed per use.  This process lends itself to a patina with age.  

A Solid Surface Example with an Accented Edge

    The focal point of the master bath suite has shifted in recent years from the whirlpool bath to the totally tricked out custom walk in shower.  Bubble tubs have gotten a bad reputation for the lack of sterilization associated with them.   There is also a concern with the associated link concerning long term lower back and kidney damage. Custom shower designs Austin is slowly doing away with the problem.

    Some people confuse Austin handicap remodeling and aging in place with universal design.  Both are a method to increase accessibility within the home but aging in place strictly deals with an existing home. Aging in place also implies modifying any home for it's older occupants to insure that the inhabitants can safely remain there as long as they possibly can.  This time will expire once they need assisting medically trained help for safeguarding their personal safety in a nursing home or an assisted living environment.  Universal design is just that; offering choices to all of a home's residents no matter their age or physical capabilities.  It begins with a design and then the construction begins.  The number one safety hazard for elderly people is negotiating level changes within the home--steps at the entry, stairs between floors, and curbs to step over when entering the bath or shower.  Eliminating level changes is very difficult in existing homes and almost impossible to do aesthetically and without major compromises, unless there is a major renovation.  The result is that most homeowners decide to sell the house rather than make the modifications.  When universal design is incorporated into their custom walk in shower design, homes can accommodate the needs of their owners as those needs evolve over time.  Custom tub shower conversions make the home safer and more accessible.

      The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut, CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

       For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097

     All new construction for roll in showers or any bathroom upgrade to provide wheelchair accessibility should involve multiple shower head combinations in multiple locations to fit anyone's desires. Rain heads coming out of the ceiling, body heads coming out of the walls in many locations, or hand held units attached to the shower walls can make things very interesting.  These combinations of heads and locations can be used to create rain effects, provide relief for muscle aches through body massages, or simply provide pin point convenience with hand held variable heads.  The possibilities are endless as you dial in your bathing environment.  Steam generators are also being considered as an investment in today's fine bathrooom designs.  The steam  heads can make the difference after a tough day when you're looking for that more therapeutic spa experience. This has certainly led the way to the thermostatic shower valve with plumbed-in hand held shower that is being used specifically in homes today where the owner is planning to retire.

Roll In Showers

     Dry saunas should also be a consideration to be incorporated into any custom bath suite. The cleansing environment accented with eucalyptus cuttings helps to dry out the sinuses and also adds it's part to the body's total muscle relaxation.  There is probably no better way to completely warm up after coming in from a cold wet winter day.  Always remember to install a floor drain for the days when the sauna must be scrubbed.

A Completely Natural Dry Sauna

     All fine bathroom makeovers must stand out even to their owners after the job is complete and all the workers have gone away.  The use of granite, marble, onyx, limestone, or glass tiles during a bathroom upgrade can only be further enhanced when any design utilizing glass blocks is introduced into the mix.  The owner's eyes will see the intense natural sparkle provided by the glass block ability to diffuse natural light that will brighten any setting and create a feeling of openess.  Glass blocks can be inserted into an interior shower wall's opening providing light from a nearby outside window or on the exterior wall itself creating a waterproof window with both privacy and insulating capabilities.  The blocks also make a great toilet partition when you don't want the confinement of an additional toilet room.  Here they can be stair stepped toward the top to the wall's highest point and their raw ends covered in cuts from your field tiles or by using special glass tiles that are available.  If you are lucky enough to be able to borrow natural light from an outside source like a light shaft or hallway you can create a brilliant room having no windows visible from the outside.

      Using glass blocks to define your shower's wet area isolates it from the rest of the bathroom.  The blocks can begin at any height above a lower knee wall that has been dressed with your bathroom's field tiles.  The shower walls can either be straight, angled, or curved and can also gradually reduce in height via a stair step design once the wet area has been contained.  These stair stepped blocks can then be covered as mentioned above.  The raw edges at the top of your wall away from direct view can simply be covered in glass block mortar and molded into any edge profile or a bullnose fashion detail.

      Your glass block walk in shower designs may be limited by the size of the blocks that you choose. Curved or radius walls are tough to do with any block wider than three inches.  The raw stair step ends for tapering as mentioned above can be replaced with a special block having a bullnose finished edge.  Angled walls can be accomplished by using special blocks that form a ninety or forty five degree corner.  As far as patterns go you can mix three, four, or six inch widths with twelve inch blocks or you can use four and eight inch width blocks together.  Just don't forget about the imported colored varieties or the antiques that are available on the market today.

     Good Luck!

     All commercial bathroom accessibility modifications in Austin, Texas should always provide for total accessibility. Never take for granted your great fortune of having free and total mobility because your situation could change in an instant.  In effect plan for your unthinkable changing future no one could have fathomed.  This consideration should always take precedent when compiling your list of specifications not only to satisfy the legal ADA parameters but as a means of providing equal comfort for all patrons.

     There are numerous published federal, state, and local guidelines but your local municipality is the dominant entity to satisfy.  Federal regulations are a good starting point but these have been revised from state to state.  However all enforcement begins with the accessible route and ends at the bathroom in question.

     Commercial construction professionals considering any fine bathroom upgrades should begin with the entry door.  Is the width substantial  for a wheelchair to enter and if so  does the closer make the door too hard to open for the impaired?  Once inside is there  adequate floor space for a 5' turning radius?   A typical one toilet  and one ADA compatible sink basic restroom measures 7 feet by 7 feet.  New commercial cabinetry at the vanity should be built to provide the proper top height and have roll under capability protecting against scalds from the plumbing pipes.  Other pertinent questions to consider include; is the urinal in a men's or unisex facility the correct height and is there room for access meeting all ADA guidelines?  Does the partition layout provide for at least one handicap stall with adequate room and entry and does it contain a comfort height toilet?  Do you have the correct grab bar configuration for the stall in question?

     Once these criteria are met you must now consider any dispensers for paper towels, soap, and toilet paper or any other fixed amenities.  Are they located at the proper height and is there a reach factor not taken into account?  Do you have blade handles to control the faucet at the vanity? 

     Compliant ADA accessible bathroom upgrades or remodels are no longer considered to be over the top or a needless expense.  You never know when you yourself might need help with your own bathroom needs following a temporary or permanent life changing situation.

An Accessible ADA Vanity With Roll Under Capability

     A combination of six faces defines nearly any given room.  The four walls receive the most preparation since they are usually the focal point as one enters the room.  Much time is spent to achieve just the right color, texture, and appearance to create that lasting impression.  The fifth surface, the floor, is generally designed for durability and comfort keeping with the rooms color scheme.  It too has a great deal to do with the general feeling of the room and as such is always considered in conjunction with the walls.  The final surface at the ceiling level is hardly ever taken into account in the finish schedule beyond that of getting a coat of color scheme blending paint. 

     One may never realize this last face even exists until they are lying in bed staring upward at a very common and unimaginable sight.  This most recently neglected surface having  such great potential has simply been made boring with the invention and use of drywall.  The old out of sight, out of mind gesture kicked in following the sheetrock revolution.  Consulting with a residential construction professional in Austin can give you some workable ideas.

     Long before drywall was slapped upon the ceiling and left to disappear in monotony, ceilings were both ornate and beautiful.  Wood was generally used on the ceiling enabling beams, coffered units, and box ceilings to be limited only by creativity. Klapp board houses had boarded ceilings covered with cheese cloth so that colorful wall paper could be hung.  Beaded and v-groove boards were another way to make ceilings interesting.  A metalic look was obtained using stamped tin panels of many patterns.  When all else failed and a homogeneous look was desired plaster was used.

     The look of fine cabinetry along with detailed woodwork and trim can be used on the ceiling to make any job more interesting and "kick it over the top".  You can combine creative  woodwork with faux or actual metal surfaces for that certain but different look.  Beamed and coffered ceilings also create a warm and rich feeling that is beyond the norm. Any use of these special ceilings will give any bath or kitchen upgrade a unique overall feel and look.  They can enhance bedrooms, home offices, libraries, vestibules or any room you'd like to reveal a looming accent. 

How would you like waking up to this Oak ceiling daily?

Try spending some of those building funds on the aspects that are only seen when you're at total rest and staring up into dullness!

     If you plan to remodel the ‘food production room’ in your home, then choosing your kitchen cabinets is probably going to be part of the plan. Not surprisingly, kitchen cabinetry is up for scrutiny in terms of the modernization tsunami changing home decor trends in recent times.

     Modern cabinets are breaking away from the ornate design found in traditional cabinet styling, rather reflecting minimal trends such as simple, clean design features. Streamlining and modernizing kitchen cabinetry or the storage cabinets used in bathroom transformations works in tandem with other kitchen or bathroom furnishings.  The use of new-age quartz countertops with complimentary glass tile backsplashes is becoming the norm.

     To the untrained eye a cabinet is just a box within a given space that fulfills a storage need.  But have you ever taken the time to look closer at the cabinet's makeup beyond the cost?   Before investing your hard earned money into cabinetry for a fine bathroom or kitchen upgrade take some time to get acquainted with the cabinet's parts and pieces.

     Cabinets are like anything else in our lives and sometimes we can be deceived by the bells and whistles the cabinet manufacturers want us all to see.  They create a sense of false quality for the consumer by blinding them with noticeably concealing finishes  masking the innermost important aspect of the cabinets general makeup.  In the North American face frame cabinet type the use of hardwood stiles and rails covered by hardwood cabinet doors fills the bill.  The most important weight bearing carcass sides, the top, and bottom or floor in a base cabinet are buried by the outer window dressing. The makeup of these aspects  is not aesthetic but structural.  These are the parts that sit perpendicular to the floor holding up the cabinet top and whatever is upon it.  They may cut this expense by using 1/2" or 5/8" thick matrix materials like MDF or particle board and covering these with a vinyl similar to shelf paper that creates "picture wood"of any wood species.  The European frameless cabinet types are generally covered entirely in a thin plastic exterior as in the case of melamine which covers up the particle board insides.  Check out the picture below representing how a simple plumbing leak creating melamine failure has lead to an entire cabinet replacement.  This customer had no choice!

     Our kitchens are no longer the "Orphan Annie’s” of our homes. This space now integrates with the rest of the home, and beautifully remodeled kitchens now serve as the main meeting space for our friends and families. You can even have wireless built into the kitchen cabinetry to power up all manner of gadgetry. It all goes to prove that kitchen cabinet design trends are moving in line with advances in technology, and why not – kitchens are the hearts of our homes.

     Their next trick is to associate quality cabinet type buzzwords like dovetail jointed drawers, European concealed cup hinges or other specialty hardware, special finishes or paints, and hardwood trim with faces as mentioned above.

     Fine cabinetry Austin, Texas consists of an entire 3/4" plywood carcass with a 1/4" plywood back.  The plywood gives you some moisture protection against a leaking sink drain trap or faulty supply line or stop valve.  European frameless cabinets can be painted on the interior using oil base enamels then covering all the visible exterior surfaces plus the doors and drawer fronts along with their edges with any choice of high pressure plastic laminate.  North American face frame cabinets can either be painted or stained and finished with polyurethane.  The finish on the plywood makes even more less vulnerable to moisture problems. 

     Don't get sucked into thinking that quality is behind the brightest glowing box on the sales floor and never forget that you get what you pay for in this life especially where cabinetry is concerned.  Do your homework!

     In the early 1800's, solid glass blocks were used as single units to light both ship's bowels and cellars in Europe.  In the early 1900's, second generation hollow glass blown  blocks resembled hexagonal open ended bottles.  They had condensation problems and were produced individually by artisans making them too expensive for general use.  In the 1930's machine production produced more uniform shapes that were easier to work into mortar.  The new units offered advantages in both thermal and noise isolation. Today's modern glass blocks for use in glass block bath designs Austin are still produced in this same way  taking two molded glass halves with a hollow interior and melting the parts to fuse them together.  A vacuum is formed in the block's interior to prevent condensation.  This evacuated "dead air" space provides for the block's thermal and sound reducing qualities.

     Using a fascinating building component composed of glass that is both fragile and sturdy with superior eye appeal allows for endless creativity and advantages.  Sound reduction as mentioned above along with thermal qualities for energy minded construction techniques are evident due to their air tight nature.  Both security and privacy is achieved by their light transmitting capabilities enhancing any bathroom transformation. This factor alone explains why glass blocks were first used in both commercial and industrial applications.

      Fine bathroom upgrades can benefit from glass block shower designs used in wall surrounds, support walls beneath whirlpool tubs, exterior shower windows, and low screening walls for privacy around spas.  Glass blocks can also benefit fine kitchen upgrades in many ways.  They can be used in islands, as supports for peninsula eating bars, or between your wall and base cabinets to provide natural light for the countertop work surface. Other uses of glass blocks are around the entry door as transoms or sidelights, in guard rails at balconies, room partitions, or sharing light from an adjacent window lit room.  Light shafts can give natural light to areas without having an outside window within the elevation.

     The light diffusing capability of glass blocks allows for back lighting projects using minimal amounts of artificial sources.  The glass blocks amplify a small amount of provided light to enhance a given area.  Artificial light sources include rope lights, incandescent bulbs, or fluorescent fixtures.  Furthermore using colored bulbs can provide any desired mood lighting creating chromotherapy results.  The glass block raw edges defining the entrance to an area can either be covered in an accenting tile and glass tile caps are now available.

      Modern glass blocks are available in many patterns, both transparent and opaque, as well as a variety of colors.  The  different sizes available allow for tremendous design opportunities while special shapes provide for curves, forty fives, and ninety degree angles.  Solid glass bricks are now available to be enhanced bu LED lighting.  Designs are limited only by one's imagination.

Glass Block Shower Designs Provide Warmth And Beauty