Problems encountered while accessing your home when you are wheelchair bound generally begin before or at the front door.  If you can reach the front porch approach without obstruction then you have a great start since the stairs leading onto the front porch can be another matter all together.  A correctly designed ramp having a 1:12 slope can adequately solve this problem.  The use of grab bars and any railings will be dictated by the ramp's design and the regulations and physical limitations involved.   Once your safely upon the porch, your home's front door width can become an issue.  Any entry door less than three feet in width will cause a problem in maintaining a required 32 inch clear entry way which starts the new accessible route within your home.  Rolling over any vertical threshold height greater than 1/2" is also difficult to maneuver.  Once inside the structure a new set of problems concerning your accessibility will be discovered.

     A traditional home builder has never truly considered the special needs of the disabled or aging within any home design. Unfortunately the design emphasis is always put on aesthetics and takes for granted everyone's mobility.  There certainly are no guarantees or clauses within any home's sales contract that will prevent our future personal life experiences from  introducing us to at least a temporary disability.  Accidents will always happen and you could find yourself having to utilize a wheelchair or walker to facilitate your independence for mobility.  Limitations in our mobility or constantly changing needs experienced by both the disabled and the elderly have sprung a new dimension in construction known as ADA remodeling to accomplish increased accessibility.  Our homes have always been exempt from any and all of the accessibility regulations that have been put in place since 1968 when our Viet Nam veterans were returning home. The new evolving concept known as Universal Design for home remodeling is catching on nation wide and has been for several years as a sign of the times.  Universal design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities. An evolution of new products used for disability home modifications is making those homes more accessible and has finally come about in the remodeling industry.  These new advances in accessible home remodeling in Austin not only keep the living environments safer but will not compromise the home's aesthetics. 

     An accessible bathroom for the user's convenience and safety becomes the first issue for anyone using a wheelchair or walker for either a short time while recovering or for the rest of their life.  The disability access bathroom will be located within the home's accessible route.  Any architectural barriers encountered while approaching the bathroom entrance will need to be removed.  The minimum clear widths have to be observed.  This will include the bathroom door itself.  Twenty four to twenty eight inch wide doors are commonly used during the construction of American homes for accessing the bathroom.  However, anything below three feet does not meet the 32 inch required clear width needed for clearance of a wheelchair. This work may involve framing alterations and moving light switches.  The electrical changes should be done by a licensed electrician assuring your safety.

     A completely serviceable special needs bathroom must contain at least one ADA vanity and the accessible route must be defined.   The vanity must be one with a clear underneath scald protected area having an unobstructed roll under capability for wheelchairs.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture.  A five foot turning radius allowing the wheelchair to maneuver into any approach must also be associated with the ADA vanity.  A 36x48" clear approach area to the vanity must be observed and this can overlap the five foot turning radius.  The area of travel will then be enhanced by an unobstructed clear accessible barrier free route dedicated to reaching the vanity. 

     Bathroom cabinets in Austin vary by style and usability.  There are basically two styles of ADA bathroom vanities that comply with an unobstructed 27" tall roll under area below the sink.  ADA sinks with a rear drain location provide for better plumbing drain hook ups.  This modification has everything to do with both the water supply lines and the waste line connecting the sink.  There must be provisions made to protect the user from being scalded when coming into contact with any one of the plumbing pipes serving the sink.  These connecting pipes may become heated merely by the water passing through them creating the problem.  The open type model should always receive both waste and supply insulating jackets applied directly to the pipes providing protection for the wheelchair user.  The closed model concealing the pipes will be equipped with a removable face or face board covering the pipes.  This pipe concealing panel must be installed at the correct wheelchair user clearance angle.  This allows for the needed unobstructed legroom required for the  user.  The vanity can extend beyond the sink but the area containing the sink is required to have this roll under capability.  This section of the vanity top must not be any taller than 34 inches above the finished floor with sufficient lower leg clearance.  Clear unobstructed reach distances around the counter top area must be observed.  Any motion controlled sensors integrated into the various dispensing devices and/or plumbing fixtures throughout the restroom present a true hands free benefit to all the restroom users.  If these aren't in the budget then at least wrist handles used for controlling the faucet can be incorporated into the design of the vanity.  Furthermore, automatic flush valves should be used on all toilets and urinals that provide for hands free use.

     Finding a contractor familiar with the guidelines of accessibility can be quite difficult. Be sure to check out the credentials of any potential bidders you contact.  Be sure they understand that the alterations you are seeking are for wheel chair accessible home remodeling and modifications.  Furthermore be sure this person knows and practices both the federal and most importantly your state's requirements before entering into any contract.

     Aging in place home modifications are available through T-Square Company. We are a certified aging in place specialist.  Each design/build situation will be customized to fit your personal needs. Call 512-444-0097 today to begin the accessible second chapter of your life while remaining safe and secure in your existing home. CAPS #1636580

     Let's face it, accessible homes are needed by all of us at some time in our lives.  This is true whether it's for ourselves, a family member, or a guest.  The need is certainly not driven by age but is a result of life's experience.  Any family living with disability among any of the generations within it's group can always benefit from additional accessibility.   This will in turn increase safety and independence for all involved as they go through life. 

The ADA refers to the Americans With Disability Act developed in the 1990's to be sure any person with a disability has equal access to all public facilities and spaces. There are no restricted codes or regulations to increase accessibility for private residences concerning residential bathrooms or disability access baths. However, the published guidelines for ADA accessibility concerning public buildings and facilities is a great resource and starting point for ideas on how to make any home safer and easier to live in. Using the ADA guidelines, every design is customized around the end users abilities and body size. Homes can become more accessible through bathroom remodels to people as they age or become disabled from an accident or chronic disease. Many of these published guidelines for wheelchair accessible remodeling, particularly requirements for corridor and door widths, safety bars and proper access to different types of facilities can go a long way in extending the amount of time an elderly or physically impaired individual is able to live independently. This is the primary goal for ADA remodeling.

Many people suddenly find themselves needing accessible homes for themselves or family members. When mobility becomes an issue for any homeowner, regardless of age, the question arises concerning physically moving to a different home with a bathroom that is more accessible. Preparing for one of those highly likely events involving someone in your home needing room modifications for even a short time while recovering from surgery is surely a smart move and is the essence of proactively planning to Age in Place. Solving Aging in Place issues will soon become the number one challenge concerning the present obsolete housing inventory in our country plus the fact that people are living longer. The situation will only become ever more expanding in time.

When our homes were first purchased, they satisfied the particular family needs of the day. These homes represented an absolute castle in the world of their owners in which to prepare for a day and they also acted  as a retreat from life's tough interactions. They housed our families, our memories, and our stuff. They represented a place where we could be ourselves. Then something happens in life changing those family needs. Unfortunately, these homes have always been exempt from any and all of the accessibility regulations mentioned by the ADA.

In fact, there are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Home modifications can increase safety, accessibility, and independence for people who want to live independently. T-Square Company, building in Austin, Texas,  incorporates the ADA rules in all their design/build projects, but in a customized manner. All disability home remodeling or disability bath remodels in Austin must be done considering all the data provided by the client, his or her family, and any caretakers involved. Aging in Place design should always be carried out by a seasoned Aging in Place specialist like T-Square Company.

The new evolving concept known as Universal Design and specialized handicap remodeling contractors for home remodeling is catching on nationwide and has been for several years as a sign of the times. Universal Design techniques used in building makes a home more accessible to all regardless of their mobility or adaptive abilities, and seamlessly segues into what is needed for Aging in Place. An evolution of new products used for disability home modifications is making homes more accessible and has finally come about in the remodeling industry. These new advances in accessible home remodeling not only keep the living environments safer but will not compromise the home's aesthetics.  They blend into the existing home and do not appear institutional. Universal Design principles never call attention to the family member needing them the most. In fact, there are many benefits to using Universal Design techniques, including potential use by aging family members, added resale value, and the fact that you'll be creating a space that can be used by anyone who visits your home, regardless of their range of abilities. Simple Universal Design updates for Aging in Place home modifications and handicap bathroom accessibility can include adding grab bars or handrails throughout the home, adding a seat within the roll-in-shower, lowering upper cabinets and multiple height counter tops, adding non-slip flooring, widening hallways or installing stair lifts, and widening doors. You might also consider lowering light switches and thermostats and installing easier to use door knobs. You should provide a clear barrier-free path or accessible route to the most visited areas of your home as recommended by the ADA. People who are interested in Aging in Place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents. They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access. ADA compliant kitchen cabinets and ADA bathroom cabinets  in handicap bathrooms will more than likely come into play to complete any accessible home remodeling project.

Most aging baby boomers prefer one-story homes in which to Age in Place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two-story homes. The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs. If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for Aging in Place and ADA accessibility in Austin, Texas.  David L. Traut, CAPS the owner and president of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging in Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors. Additionally, he is certified in Universal Design in the United States and Australia. David has recently published a book called "Age in Place at Home: Adapting the Home Environment For All Generations". The book explains the importance of Universal Design in building and is available through Amazon.

     Universal design and aging in place trends have taken hold in the residential remodeling industry.  Bathrooms with disability access needed are exactly why aging in place home modifications for independent living and elder construction in Austin are so important.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to deal with the growing demand.  It is ultimately up to the homeowners and their families to plan for future housing needs.  Just what are the most important design issues regarding aging in place home modifications done br home remodeling professionals in Austin?

     To begin with, the JCHS data showed that one of the top priorities with aging in place consumers is low maintenance.  They want their houses to look great and require as little maintenance as possible.  There is a minimal need for landscaping and outdoor upkeep, exteriors that require periodic painting, and a preference for newer houses rather than older ones where things don't break down as easily.  These are the main reasons why the aging population considers moving.  However, the kitchen and bath in existing homes are the two main areas most referenced when considering improvements.

     People who are interested in aging in place home improvements are now looking for a level entry into their home along with the maneuverability that a more open floor plan having greater clear unobstructed floor space presents.  They desire flat floors without transitions requiring steps or stairs to move around.  Ramps having a correct 1:12 slope can be used to get them up to the level floor space at the exterior entries or the garage access.

     Most aging baby boomers prefer one story homes in which to age in place and this has become a primary reason to relocate versus a remodel.  They are looking for an accessible master suite and kitchen located on the same floor.  However, some developments mandate building two story homes.  The above requirement can be easily met by placing the guest bedrooms and accompanying bath upstairs.  If the master suite for any reason needs to be upstairs, closets can be stacked between floors to house a future elevator installation.

     Many people find themselves needing accessible homes for themselves or family members requiring disability access remodeling. There are approximately 30 million Americans using wheelchairs and the number of people who need accessible homes will continue to increase as disabled and aging people are finding more ways to remain living in their homes. One important way to increase independent living is making a home accessible to an individuals personal needs. Elder living solutions and home modifications can increase safety, accessibility, and independence for people who want to live independently.

The Top Five Items To Include In An Accessible Kitchen Design

1. Doorway Clearance and Hallway Widths

Installing 36" wide doors will allow for the required minimum clearance of 32" for disability access baths and kitchens.   Lever lock sets should be installed on each door and clear swing out hinges provide a greater clearance. Unobstructed clear hallways should be at least 36" wide but 42" is preferable.

2. Kitchen Wall Cabinets

Kitchens have evolved because fewer cabinets are needed within the more open designs.  Fewer wall cabinets are needed because of personal reach limitations. For those that are used, they can be installed at 14" above the base cabinet work top instead of the standard 18" spacing.  The cabinet top is now lowered by two inches and installed at a universal 34" height.  This makes a net 6 inch lower installation height for the bottom of the wall cabinet.  All types of cabinet inserts like pull out shelves and specialized drawers are now available for installation in both base and wall cabinets.  These devices will certainly help solve the reach problem.  Base cabinet kick spaces can be raised to 9" and deepened instead of the standard 4" to allow for wheelchair access.  Recognized clear knee spaces can be incorporated into the design for roll under access at the sink, prep area, and cook top. Doors are the worst enemy for anyone using a wheelchair. Pull out open shelves and drawers are preferable for not causing architectural barriers. Graspable pulls should be used with a "C" or "U" shaped configuration.

3. Kitchen Work Surfaces

Ideally you would measure individual comfort ranges for working in the kitchen for whom the kitchen is being accommodated. Accessible counter workspaces are a minimum of 30" wide and should be installed at 34" above the finished floor. Countertops should not be obstructed by base cabinets in wok areas like food prep areas, sinks, and dining areas.

4. Kitchen Sinks

Sinks that have open space beneath the sink that provides wheelchair or walker accessibility will allow users to access the sink. Knee clearance for a sink needs to be at least 27” high, 8” deep at the knees or 11” deep for children.The drain should be placed in the rear of the sink so the piping underneath will not prevent a person in a wheelchair from rolling underneath. Pipes should be insulated or enclosed by a removable panel to protect legs from scalding. Using a single lever faucet is a lower cost option to making the faucet accessible. There are also touch control faucets that allow the user to turn on and off the faucet with one touch.  Also, installing the faucet to the side of the sink may make it more accessible for some people. A 24" reach limit should be observed.

5. Appliances

The lack of bending motion and decreasing reach distances is changing the way we purchase and install appliances at comfortable heights. Placing dishwashers higher by a few inches to limit bending has become a reachable fad and the new height is changing the old look of our kitchens.   Refrigerator drawers, dishwashing drawers, and double ovens that are no longer stacked are just a few changes within the present day appliance marketplace.  Cooking ranges with the controls located on the front represents another metamorphosis helping with reach problems.  Microwaves can be installed on the now lowered countertop or within the lowered base cabinet according to the consumers need for adequate reach.

In Conclusion:

The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     For additional information about the CAPS program, visit nahb.org/CAPS.  For more information about T-Square Company, visit www.tsquareco.com or call 512-444-0097.

    The concept of the accessible home has evolved beyond the basic grab bars and ramps to one in which accessibility is built into the basic design.  Universal design makes living in a home easier for people of all ages and abilities.  Accessible can be both beautiful and functional and never needs to have any institutional appearance.  As our aging baby boomer population ages, the need for accessibility in the home is becoming ever more important.  Our new way of viewing the basic home in our society and our antiquated architecture is giving way to a revolution in home design.  Ordinary homeowners with extraordinary challenges can partner up with CAPS design professionals, architects, and their own families to create homes to restore capabilities, independence, and grace to daily living.  Bathroom accessibility remodels with roll in showers in Austin, Texas are possible with the right people involved.

     Human problems must be solved using correct designs when remodeling which have been customized to match the abilities of the occupant.  People who have become seriously injured, people living with a debilitating disease, people with sensory limitations or intellectual limitations, and last but not least the people who are planning to stay in their homes for as long as possible all need accessible homes.  The need for dealing with disabilities empowers us all to ensure that we create environments wherein people can function effectively. 

     But you say to yourself that  your needed aging in place home modifications basically require general home remodeling in Austin, Texas or in any other town for that matter.  That is true but a specialized handicap remodeling contractor holding a national CAPS certificate is who you need as a partner to insure that  the accessibility issues of your home are solved correctly.  With over 30 years of remodeling experience I obtained my registered CAPS certificate.  By offering a design/build firm to my aging in place customers, I get personal satisfaction from giving my clients their independence back while the remain in their existing home.  Without the training required to earn the CAPS certificate on top of my decades of building knowledge I could not offer my customers such a thorough and complete solution for solving their accessibility issues.  Only an experienced qualified remodeler holding a CAPS certificate has the qualifications to design an accessible route and perform the construction required to make it safe and functional for the AIP customer.  Accessible bathrooms with custom walk in showers and kitchens are available using the right education and experience.  There is nothing more rewarding than seeing a person with mobility impairments be able to independently roll into his or her shower in their disability access bath and witness that accomplishment.

     The National Association of Home Builders, in partnership with the AARP and Home Innovation Research Labs, created the CAPS program, which includes training and education on the technical, business management and customer service skills essential to compete in the fastest growing segment of the residential remodeling industry--home modifications for aging in place.  David L. Traut CAPS owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners or their visitors.

     What really defines the accessible homes of Austin?  Barrier free architectural design for all who enter the structure while approaching the main living areas of the home in question is a fair definition. Universal design and aging in place trends have taken hold in the residential remodeling industry.  The current housing inventory doesn't offer the features needed for safety and accessibility in the numbers needed to accommodate the ever growing demand.  It is ultimately up to the individual homeowners and their families to plan for future housing needs. Once it is discovered that modifications to an existing home are not possible to accomplish total accessibility then it is time to consider a newer or custom built accessible home.  What are the main design issues regarding aging in place home modifications in Austin?

1. Low maintenance with little need for landscaping or exterior upkeep which could translate into newer rather than older homes that are the accessible homes of Austin.
2. An accessible level entry either achieved with ramps or the rare flat lot in Austin.  Consumers are looking for the free maneuverability that more open floorplans offer having greater clear unobstructed floor space.  Wider doorways and unobstructed accessible routes are truly a concern.  These structures will provide flat floors without transitions requiring steps or stairs to move around.
3. An accessible master suite and kitchen located on the same floor is preferable.  If two story homes are mandated by the community then the guests will inhabit the second floor.  If the master suite needs to be located on the second floor then closets can be stacked to house a future elevator installation.
4. Evolving kitchens have sprung up due to the more open floorplans.  Fewer wall cabinets, lowered cabinet tops, pullout shelves or specialized drawers, and a reduced number of mobility obstructing doors represent the evolution of todays cabinetry. Kneespaces can be incorporated into a kitchen design for roll under access to the sink, prep area, and cooktop.  Higher toe kicks can facilitate greater wheelchair access.
5. Appliances are being installed at more comfortable heights due to decreased reach distances and bending motion.  Raised dishwashers, refrigerator drawers,  dishwashing drawers, and non-stacked double ovens are just a few changes within the appliance world.  Microwaves can be installed below the cabinet top and cooktops with controls located on the front represent another appliance metamorphosis helping with reach problems.
6. The lack of cabinet doors creating a new accessible open look for cabinetry is taking hold on the market.  This is becoming more popular in both the bath and kitchen of accessible homes.
7. Concerning bathroom accessibility remodels, bathroom vanities with universal height cabinet tops and open knee spaces are taking over the marketplace.  These new residential vanities do not need to look institutional.  They can be designed like any other piece of fine furniture. Comfort height toilets covered with any one of a multitude of available seats to fit every need prevent deep knee bends required for seating. Curbless roll in showers are advised for everyone on a universal level.  The shower should contain at least a shower wand on a sliding bar to be available for varying heights of use along with a regular height shower head with diverter control if desired.  Folding seats are useful if caretakers are involved and secure grab bars around the shower perimeter will increase the safety factor and prevent falls.  All of the bathroom floor surface must be nonskid to prevent slipping on a guaranteed wet floor. 

     The above factors have brought about the need for universal design ideas.  This is the design of products, services, and environments that are usable by as many people as possible regardless of age, ability, or situation without the need for adaptation or specialized alterations.  It provides for the greatest safety and access for any home guests or occupants and is undetectable when done well.

     Construction and design professionals are taking advantage of the CAPS training across the nation. This designation is taught through the National Association of Home Builders in collaboration with AARP. CAPS connects responsible professionals with home owners who need these services on an ever increasing basis. CAPS is a nationwide initiative and all active CAPS professionals can be found at nahb.org/CAPSdirectory.  David L. Traut, CAPS the owner of T-Square Company in Austin, Texas is one of the select group of professionals nationwide to earn the Certified Aging-In-Place Specialist (CAPS) designation, identifying him as a home remodeler and builder with the skills and knowledge necessary to remodel or modify a home to meet the unique needs of the older population, disabled owners, or their visitors.

A Custom Roll In Shower Design

  .