The ideal time to begin is before accessibility becomes necessary.
Most homeowners benefit from following this timeline:
Planning early provides more choices, lower costs, and better outcomes.
These affordable modifications significantly improve safety and are ideal for homeowners beginning to plan. The estimated completion time can range from an afternoon to several days.
These modest modifications include adding motion-sensor lighting, installing video doorbells, changing your locksets to lever-style, making sure handrails accompany all entry steps, and improving landscape lighting. Make sure your walkways are slip-resistant and install threshold ramps where needed.
On your home's interior, replace ball door handles with levers, upgrade existing toggle-type light switches using rockers or use smart light switches, apply offset door hinges where needed, improve all lighting to a layered look, consider motion-activated nightlights where needed, remove throw rugs, and ensure handrails exist on both sides of all stairs.
Grab bars should be installed in wood blocking at the shower, tub, and toilet, include a handheld showerhead for convenience, replace the toilet with a comfort-height model, install non-slip flooring; use anti-scald valves, and upgrade your vanity lighting.
Remove clutter from inside the room, and all travel paths are clear. Lower hanging rods, use closet organizers, and create better bedside lighting.
Use pull-out shelves where possible, replace hard-to-grasp knobs with D-shaped cabinet pulls, consider a lever-type kitchen faucet, incorporate under-cabinet lighting, retrofit Lazy Susans in blind corners, and replace existing drawer mounting hardware using full-extension guides.
These projects improve mobility while preserving the home's appearance. The estimated completion time ranges from several days to three weeks.
Begin by verifying the bathroom entrance door is 36 inches wide, consider upgrading the flooring with slip-resistant tile, create a curbless shower with a fold-up bench, and incorporate a comfort-height vanity around 34 inches tall.
Lower the countertop work area to 34 inches, include pull-out shelving where possible, ensure an accessible appliance layout with adequate approaches, consider improved task lighting at work areas, and create an accessible sink design.
Widen all interior doors to 36 inches, use pocket doors when possible, evaluate all flooring as continuous with no more than 1/2 inch height difference between floor type changes, improve all traffic circulation spaces, and improve stairs by upgrading new stair rail systems as required.
Use a front-loading washer and dryer on manufacturer's platforms, provide a pull-out work surface, and make room for accessible storage.
Install ramps where needed with a 1:12-1:20 slope, consider a covered entry, and install a zero-threshold (ADA) entry at all doors.
These are long-term investments that allow homeowners to remain in their homes safely for decades. The estimated time for completion is from three weeks to several months. These types of improvements add tremendous value to your home.
Complete a Universal Design remodel, create a barrier-free shower, maintain a five-foot wheelchair turning radius with adequate 30x48-inch approaches to all fixtures, and upgrade your custom cabinetry with a roll-under sink and comfort-height fixtures.
Complete a Universal Design kitchen remodel, create multi-height working surfaces, consider roll-under capability at all sinks and prep areas, create an accessible pantry, include a touchless faucet and induction cooktop, and include a side-opening oven.
Determine whether there is a first-floor primary bedroom suite or an accessible guest suite will be used; determine whether a bedroom addition is needed; consider an open floor plan and wider hallways; and determine what structural modifications will be needed.
Determine if a vertical platform lift, residential elevator, or stair lift is appropriate for your needs.
Determine that all entrances incorporate zero-step or ADA thresholds, retrofit a dedicated entrance, whether in the garage or a covered accessible porch, and determine if an expanded driveway access is needed.
Install smart home automation, create voice-activated lighting where needed, automate window shades, and ensure HVAC thermostats are accessible, plus verify security and emergency response systems are adequate.
Because many homes in the Austin area were built between the 1970s and early 2000s, they often include features that become barriers as homeowners age, such as sunken living rooms, narrow bathroom doorways, standard-height tubs, raised entry thresholds, split-level floor plans, poor lighting, steep front entries and driveways, and limited blocking in bathroom walls for future grab bars.
These homes can usually be adapted successfully with thoughtful planning and phased remodeling. Consult with a certified Aging in Place Specialist.
Case in Point
One Austin homeowner contacted T-Square Company after recovering from knee replacement surgery. What began as a request for grab bars quickly became a long-term accessibility plan. Rather than remodeling the entire home immediately, we completed improvements over several years. Today, the home remains safe, beautiful, and fully functional while allowing the homeowner to live independently with confidence.
One of the biggest misconceptions is that aging in place requires a complete home renovation. In reality, the most successful projects begin with small, proactive improvements that reduce fall risks and make daily living easier. As needs change over time, additional modifications can be added in phases, allowing homeowners to spread costs over several years while preserving the comfort, beauty, and familiarity of the home they love.
David Traut, the award-winning author of Age in Place at Home: Adapting the Home Environment for all Generations, provides guidance for homeowners and families desiring to Age in Place, discussing different living situations. He takes you room by room inside a home, offering his thoughtful insights and solutions.
As a Certified Aging in Place Specialist (CAPS) with more than 30 years of design-build experience in the Austin area, David L. Traut and T-Square Company help homeowners develop personalized accessibility plans that evolve with changing needs. The goal isn't simply to modify a house—it's to create a forever home that supports independence, safety, dignity, and peace of mind for years to come.
With years of experience designing accessible homes throughout Central Texas, David L. Traut, CAPS, and T-Square Company help homeowners create personalized accessibility plans that evolve with changing needs. The objective isn't simply to remodel a house—it's to build a forever home where safety, dignity, independence, and peace of mind can flourish for years to come.